- Latest available (Revised)
- Original (As made)
The Registered Designs Rules 1995
You are here:
What Version
Status:
This is the original version (as it was originally made). UK Statutory Instruments are not carried in their revised form on this site.
Size and presentation of representations
19.—(1) Each representation of the design, whether to be applied to a single article or to a set of articles, shall be upon paper of the size prescribed by rule 5 above and not on cardboard, and shall appear on one side only of the paper. The figure or figures shall be placed in an upright position on the sheet except where the registrar is satisfied that it is impracticable. When more figures than one are shown, these shall where reasonably practicable be on one and the same sheet, and each shall be designated perspective view, front view, side view, plan or otherwise as the case may be.
(2) Each sheet shall bear in the top left hand corner the name of the applicant and in the top right hand corner the number of sheets comprising the representation and the consecutive number of each sheet.
Options/Help
Print Options
Print The Whole Instrument
Print The Whole Cross Heading
Print This Section only
Legislation is available in different versions:
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made):The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Opening Options
Different options to open legislation in order to view more content on screen at once