- Latest available (Revised)
- Original (As made)
The Supply of Machinery (Safety) (Amendment) Regulations 1994
You are here:
- 1994 No. 2063
- SCHEDULE 1
- PART II
What Version
Status:
This is the original version (as it was originally made). UK Statutory Instruments are not carried in their revised form on this site.
PART II
1. In regulation 2(2) for the definition of “transposed harmonised standard” there shall be substituted—
““transposed harmonised standard” means a national standard of an EEA State which transposes a harmonised standard.”.
2. For regulation 6(1) there shall be substituted—
“(1) These Regulations do not apply to machinery which the supplier believes (with reasonable cause) will be put into service in a country outside the European Economic Area.”.
3. For regulation 17 there shall be substituted—
“17. For the purposes of these Regulations, an approved body is a body responsible for carrying out functions relating to the conformity assessment procedures set out in Article 8 of the Machinery Directive and described in regulations 14 and 15 above which has been—
(a)appointed as a United Kingdom approved body pursuant to regulation 18 below; or
(b)appointed by an EEA State other than the United Kingdom.”.
4. In regulation 22(3) for “An EEC declaration” there shall be substituted “An EC declaration”.
Options/Help
Print Options
Print The Whole Instrument
Print The Whole Schedule
Print This Part only
Legislation is available in different versions:
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made):The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Opening Options
Different options to open legislation in order to view more content on screen at once