SCHEDULE 13

(Regulations 18 and 20)

PART IRequirements relating to obligatory end-outline marker lamps and to optional end-outline marker lamps to the extent specified in part ii

Annotations:
Commencement Information
I4

Sch. 13 Pt. I para. 1 in force at 1.11.1989, see reg. 1(1)

I5

Sch. 13 Pt. I para. 2 in force at 1.11.1989, see reg. 1(1)

I6

Sch. 13 Pt. I para. 3 in force at 1.11.1989, see reg. 1(1)

I7

Sch. 13 Pt. I para. 4 in force at 1.11.1989, see reg. 1(1)

I8

Sch. 13 Pt. I para. 5 in force at 1.11.1989, see reg. 1(1)

I9

Sch. 13 Pt. I para. 6 in force at 1.11.1989, see reg. 1(1)

I10

Sch. 13 Pt. I para. 7 in force at 1.11.1989, see reg. 1(1)

I11

Sch. 13 Pt. I para. 8 in force at 1.11.1989, see reg. 1(1)

I12

Sch. 13 Pt. I para. 9 in force at 1.11.1989, see reg. 1(1)

I13

Sch. 13 Pt. I para. 10 in force at 1.11.1989, see reg. 1(1)

I14

Sch. 13 Pt. I para. 11 in force at 1.11.1989, see reg. 1(1)

I41

Number:

Two visible from the front and two visible from the rear

I52

Position–

a

Longitudinal:

No requirement

b

Lateral–

i

Maximum distance from the side of the vehicle:

400 mm

ii

Minimum separation distance between a pair of end-outline marker lamps:

No requirement

c

Vertical–

i

At the front of a motor vehicle:

The horizontal plane tangential to the upper edge of the illuminated area of the lamp shall not be lower than the horizontal plane tangential to the upper edge of the transparent zone of the windscreen

ii

At the front of a trailer and at the rear of any vehicle:

At the maximum height compatible with:

  • the requirements relating to the lateral position and to being a pair, and

  • the use for which the vehicle is constructed

I63

Angles of visibility–

a

Horizontal:

0° inwards and 80° outwards

b

Vertical:

5° above and 20° below the horizontal

I74

Alignment:

Such that white light is shown towards the front and red light is shown towards the rear

I85

Markings:

An approval mark

I96

Size of illuminated area:

No requirement

I107

Colour:

White towards the front and red towards the rear

I118

Wattage:

No requirement

I129

Intensity:

No requirement

I1310

Electrical connections:

No individual requirement

I1411

Tell-tale:

No requirement

I112

Other requirements–

  • The two lamps which emit white light towards the front, and the two lamps which emit red light towards the rear, shall in each case form a matched pair.

  • The white front lamp and red rear lamp on one side of a vehicle may be combined into a single lamp with a single light source.

I213

Definitions–

  • In this Schedule, “approval mark” means the aproval mark for a front or rear position lamp, as the case may be.

I3PART IIRequirements relating to optional end-outline marker lamps

Annotations:
Commencement Information
I3

Sch. 13 Pt. II in force at 1.11.1989, see reg. 1(1)

Any number may be fitted, and the only requirement prescribed by these Regulations in respect of any which are fitted is that specified in paragraph 7 of Part I.