- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made). This item of legislation is currently only available in its original format.
2. Any gap in the sleeping surface of a bunk bed shall be measured by inserting the point of the cone into the gap in such a way that its axis of symmetry is perpendicular to the plane which joins the boundaries of the gap. The cone shall be advanced slowly and steadily further into the gap until an axial force of 100 Newtons is indicated, in which condition the points of contact between the surface of the cone and the boundaries of the gap shall lie on the 75 millimetre line marked round the cone or at a position representing a smaller diameter. The measurement shall be taken in as many places in any such gap as may be necessary to determine the most onerous conditions of dimension and distortion of the boundaries of the gap.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: