Search Legislation

The Motor Vehicles (Type Approval) (Great Britain) Regulations 1984

What Version

 Help about what version
  • Latest available (Revised)
  • Original (As made)

Status:

This is the original version (as it was originally made). This item of legislation is currently only available in its original format. The electronic version of this UK Statutory Instrument has been contributed by Westlaw and is taken from the printed publication. Read more

SCHEDULE 1TYPE APPROVAL REQUIREMENTS

(1)(2)(3)(4)(5)(6)
Item No.Subject matterParticulars of instrument or other document containing requirements and of the nature of the requirementVehicles exempted from requirementDate of applicationDate of cessation of application
(a)(b)(c)
Description, reference number and date of instrumentOfficial Journal reference of Community InstrumentNature of requirement and place in instrument where stated
1Doors, their latches and hingesCouncil Directive 70/387/EEC of 27th July 1970 orL176, 10.8.70, p. 5 (SE 1970 (II), p. 564).Design and construction requirements in Annexes I (excluding paragraph 3) and II.Vehicles which have, for the exit or entry of the occupants, no doors or only sliding doors.1.8.1978
ECE Regulation 11 of 8th January 1969 as corrected on 16th March 1971 and amended on 6th May 1974.Design and construction requirements in paragraphs 5 and 6.1.8.1978
1ADoors, their latches and hingesECE Regulation 11 as revised on 15th March 1981 and corrected on 9th August 1982.Design and construction requirements in paragraphs 5 and 6.Vehicles which have, for the exit or entry of the occupants, no doors.5.1.1982
2Radio-interference suppressionECE Regulation 10 of 17th December 1968 as corrected on 26th January 1970.Design, construction and equipment requirements in paragraphs 6 and 7. Marking requirements in paragraph 4.Vehicles with other than spark ignition engines.1.8.197830.9.1984
2ARadio-interference suppressionCouncil Directive 72/245/EEC of 20th June 1972 orL152, 6.7.72, p. 15 (SE 1972 (II), p. 637).Design, construction and equipment requirements in Annex I, paragraphs 6 and 7. Marking requirements in Annex I, paragraph 4.Vehicles with other than spark ignition engines.1.8.1978
ECE Regulation 10 as revised on 19th March 1978.Design, construction and equipment requirements in paragraphs 6 and 7. Marking requirements in paragraph 4.1.10.1979
3Protective steeringCouncil Directive 74/297/EEC of 4th June 1974 orL165, 20.6.74, p. 16.Design and construction requirements in Annex I, paragraphs 5 and 6.1. Vehicles the steering control of which has been specially constructed for the use of a person suffering from some physical defect or disability.1.8.1978
ECE Regulation 12 as revised on 20th October 1974.Design and construction requirements in paragraphs 5 and 6.2. Vehicles with forward control, that is to say a vehicle in which the centre of the steering wheel is in the forward quarter of the total length of the vehicle (including any bumpers and over-riders).1.8.1978
3AProtective steeringECE Regulation 12 as revised on 14th November 1982.Design and construction requirements in paragraphs 5 and 6.

1. Vehicles the steering control of which has been specially constructed for the use of a person suffering from some physical defect or disability.

2. Vehicles with forward control, that is to say a vehicle in which the centre of the steering wheel is in the forward quarter of the total length of the vehicle (including any bumpers and over-riders).

11.4.1983
4BExhaust emissionsCouncil Directive 70/220/EEC of 20th March 1970 as amended by Council Directive 74/290/EEC of 28th May 1974, Commission Directive 77/102/EEC of 30th November 1976 and Commission Directive 78/665/EEC of 14th July 1978 orL76, 6.4.70, p. 1(SE 1970 (I), p. 171), L159, 15.6.74, p. 61, L32, 3.2.77, p. 32 and L223, 14.8.78, p. 48.Design, construction and equipment requirements in Annex I, paragraphs 3 and 4.

1. Vehicles with other than spark ignition engines.

2. Vehicles over 3500 kg maximum gross weight.

3. Vehicles fuelled solely by liquid petroleum gas.

1.10.1979
ECE Regulation 15 as revised on 6th March 1978.Design, construction and equipment requirements in paragraphs 5 and 6 and, in relation to vehicles with automatic transmission, paragraph 11.6.10.1.1979
4CExhaust emissionsCouncil Directive 70/220/EEC of 20th March 1970 as amended by Council Directive 74/290/EEC of 28th May 1974, Commission Directive 77/102/EEC of 30th November 1976, Commission Directive 78/665/EEC of 14th July 1978 and Council Directive 83/351/EEC of 16th June 1983 orL76, 6.4.70, p. 1 (SE 1970 (I), p. 171), L159, 15.6.74, p. 61, L32, 3.2.77, p. 32, L223, 14.8.78, p. 48 and L197, 20.7.83, p. 1.Design, construction and equipment requirements in Annex I, paragraphs 5 and 6 and, in relation to vehicles designed to carry more than 6 persons, paragraph 8.1.

1. Vehicles with other than spark ignition engines.

2. Vehicles over 3500 kg maximum gross weight.

3. Vehicles with two-stroke engines.

4. Vehicles fuelled solely by liquid petroleum gas.

21.8.1984
ECE Regulation 15 as revised on 20th October 1981 and corrected on 9th June 1982.Design, construction and equipment requirements in paragraphs 5 and 6 and, in relation to vehicles designed to carry more than 6 persons, paragraph 12.9.11.4.1983
5Exhaust emissionsCouncil Directive 72/306/EEC of 2nd August 1972 orL190, 20.8.72, p. 1 (SE 1972 (III), p. 889).Design, construction and equipment requirements in Annex I, paragraph 5. Marking requirements in Annex I, paragraph 4.Vehicles with other than compression ignition engines.1.8.1978
ECE Regulation 24 of 23rd August 1971 as corrected on 1st December 1972, amended on 11th September 1973 and corrected on 1st July 1975.Design, construction and equipment requirements in paragraph 5. Marking requirements in paragraph 4.4.2.1.8.1978
5AExhaust emissionsECE Regulation 24 as revised on 11th February 1980.Design, construction and equipment requirements in paragraph 5. Marking requirements in paragraph 4.4.3.Vehicles with other than compression ignition engines.14.12.1981
6Lamps—headlamps and filament lamps1. ECE Regulation 1 as revised on 26th October 1964 and corrected on 8th June 1965 andDesign and construction requirements in paragraphs 5, 6 and 10. Marking requirements in paragraphs 3 and 4b.1.8.1978

NOTE

The references opposite in column (3)(a) to ECE Regulation 2 as corrected and amended, ECE Regulation 8 as corrected, ECE Regulation 20 and Council Directive 76/761/EEC, extend to the provisions in those Regulations, and that Directive, relating to headlamps together with either—

ECE Regulation 2 as revised on 26th October 1964 and corrected on 8th June 1965 orDesign and construction requirements in paragraphs 5, 6, 7, 8, 9, 10 and 11. Marking requirements in paragraph 3.1.8.1978
ECE Regulation 2 as revised on 26th October 1964, corrected on 8th June 1965 and amended on 26th September 1978 orDesign and construction requirements in paragraphs 5, 6, 7, 8, 9, 10 and 11. Marking requirements in paragraph 3.1.10.1979
(a) the provisions in those Regulations, and that Directive relating to filament lamps, or2. ECE Regulation 5 of 22nd May 1967 as corrected on 30th September 1968 orDesign and construction requirements in paragraphs 6, 7, 8, 9 and 10. Marking requirements in paragraphs 4, 5.3.2 and 5.4.1.8.1978
(b) the provisions in ECE Regulation 37 of 1st November 1977 relating to filament lamps.2A. ECE Regulation 5 as revised on 29th August 1982 orDesign and construction requirements in paragraphs 6, 7, 8, 9 and 10. Marking requirements in paragraphs 4, 5.3.2 and 5.4.21.8.1984
3. ECE Regulation 8 as revised on 6th May 1974 and corrected on 2nd May 1977 and 21st June 1978 orDesign and construction requirements in paragraphs 5, 6, 7, 9, 10, 11, 12, 13 and 14. Marking requirements in paragraphs 3, 4.4.2 and 4.5.1.8.1978
4. ECE Regulation 20 of 1st March 1971 orDesign and construction requirements in paragraphs 5, 6, 7, 9, 10, 11, 12, 13 and 14. Marking requirements in paragraphs 3, 4.3.2 and 4.4.1.8.1978
5. ECE Regulation 31 of 2nd June 1975 orDesign and construction requirements in paragraphs 6, 7, 8 and 9. Marking requirements in paragraphs 4, 5.3.2 and 5.4.1.8.1978
6. British Standard Specification No. AU 40, part 4a of 1966 orDesign and construction requirements in clauses 4 to 11 inclusive. Marking requirements in clause 3.1.8.1978
7. Council Directive 76/761/EEC of 27th July 1976.L262, 27.9.76, p. 96.Design and construction requirements in Annex I, paragraphs 1, 5, 6 and 10, Annex III, paragraphs 1, 5, 6, 7, 8, 9, 10 and 11 and Annex V. Marking requirements in Annex VI, paragraphs 2, 4.3 and 4.4.1.8.1978
6ALamps—headlamps and filament lampsECE Regulation 20 as revised on 15th August 1976.Design and construction requirements in paragraphs 5, 6, 7, 9, 10, 11, 12, 13 and 14. Marking requirements in paragraphs 3, 4.3.2 and 4.4.1.8.1978

NOTE

The reference opposite in column (3)(a) to ECE Regulation 20 extends to the provisions in that Regulation relating to headlamps together with either—

(a) the provisions in that Regulation relating to filament lamps, or

(b) the provisions in ECE Regulation 37 of 1st November 1977 relating to filament lamps.

7Lamps—side, rear, stopECE Regulation 7 of 22nd May 1967 as corrected on 9th February 1971 orDesign and construction requirements in paragraphs 5, 6, 7, 8 and 11. Marking requirements in paragraphs 3 and 4.4.2.Vehicles manufactured in Italy with rear lamps bearing the marks “IGM” and “LP”, but this exemption applies only to rear lamps which are not stop lamps.1.8.1978
Council Directive 76/758/EEC of 27th July 1976.L262, 27.9.76, p. 54.Design and construction requirements in Annex 0, paragraphs 1, 5, 6, 7 and 8, Annexes I, IV and V. Marking requirements in Annex III, paragraphs 2 and 4.3.1 to 4.3.5.1.8.1978
8Rear reflectorsECE Regulation 3 of 23rd September 1964 orDesign and construction requirements in paragraphs 6 and 7. Marking requirements in paragraphs 4.1, 4.4 and 5.5.1.3.Vehicles manufactured in Italy with rear reflectors bearing the marks “IGM” and “C.1” or “C.2”.1.8.1978
British Standard Specification No. AU40, Part 2 (reflex reflectors for vehicles including cycles) of 1965 orDesign and construction requirements in clauses 5 and 6. Marking requirements in clause 4.1.8.1978
Council Directive 76/757/EEC of 27th July 1976.L262, 27.9.76, p. 32.Design and construction requirements in Annex 0, paragraphs 2, 6 and 7, Annexes I, V, VI, VII, VIII, IX, X, XI and XII. Marking requirements in Annex III, paragraphs 2 and 4.3.1.8.1978
8ARear reflectorsECE Regulation 3 as revised on 20th March 1982.Design and construction requirements in paragraphs 9 and 10. Marking requirements in paragraphs 4.1, 4.3, 4.4 and 5.5.1.3.11.4.1983
9Direction indicatorsECE Regulation 6 of 22nd May 1967 orDesign and construction requirements in paragraphs 1, 5, 6, 7, 8 and 11. Marking requirements in paragraphs 3.1, 3.2 and 4.3.2.1.8.1978
Council Directive 76/759/EEC of 27th July 1976.L262, 27.9.76, p. 71.Design and construction requirements in Annex 0, paragraphs 1, 5, 6, 7 and 8, Annexes I, IV and V. Marking requirements in Annex III, paragraphs 2 and 5.5.1.3.1.8.1978
10Rear-view mirrorsCouncil Directive 71/127/EEC of 1st March 1971.L68, 22.3.71, p. 1 (SE 1971 (I), p. 136).Design, construction and equipment requirements in Annex I, paragraphs 2.1, 2.2, 2.3, 2.4, 2.5 and 3.1.8.1978
10ARear-view mirrorsCouncil Directive 71/127/EEC of 1st March 1971 as amended by Commission Directive 79/795/EEC of 20th July 1979.L68, 22.3.71, p. 1 (SE 1971 (I), p. 136) and L239, 22.9.79, p. 1.Design, construction and equipment requirements in Annex I, paragraphs 2.1, 2.2, 2.3, 2.4, 2.5 and 3.1.6.1980
11Anti-theft devicesCouncil Directive 74/61/EEC of 17th December 1973 orL38, 11.2.74, p. 22.Design and construction requirements in Annex I, paragraphs 1, 2.3, 5 and 6.Vehicles specially constructed (and not merely adapted) for the use of a person suffering from some physical defect or disability.1.8.1978
ECE Regulation 18 of 14th September 1970.Design and construction requirements in paragraphs 2.3, 2.4, 5 and 6.1.8.1978
11AAnti-theft devicesECE Regulation 18 as revised on 24th November 1980.Design and construction requirements in paragraphs 2.3, 2.4, 5 and 6.Vehicles specially constructed (and not merely adapted) for the use of a person suffering from some physical defect or disability.5.1.1982
12A

(ia) Seat belts designed for use by an adult person—

(a) which are anchored at no less than 3 points and which are for use for the seats specified in Regulation 17(5)(b) of the Construction and Use Regulations, or

Council Directive 77/541/EEC of 28th June 1977 orL220, 29.8.77, p. 95.Design, construction and equipment requirements in Annex I, paragraphs 2.3.2, 2.4, 2.5, 2.6, 2.7.2, 2.7.3, 2.7.4, 2.7.5, 2.7.6, 2.7.7, 2.7.8, 2.7.9 and 2.7.10. Marking requirements in Annex I, paragraph 2.2 and Annex III, paragraphs 1.1.3.1, 1.1.3.2 and 1.2.Vehicles which have been specially designed and constructed, or specially adapted, for the use of a person suffering from some physical defect or disability in a case where a disabled person's seat belt (as defined in Regulation 17(12) of the Construction and Use Regulations) for an adult person is provided for use—1.10.1980
(b) for other seat belts, if fitted, for other forward-facing seats (not being disabled persons' seat belts as defined in Regulation 17(12) of the said Regulations)Council Directive 77/541/EEC of 28th June 1977 as amended by Council Directive 81/576/EEC of 20th July 1981 and Commission Directive 82/319/EEC of 2nd April 1982 orL220, 29.8.77, p. 95, L209, 29.7.81, p. 32 and L139, 19.5.82, p. 17.Design, construction and equipment requirements in Annex I, paragraphs 2.3.2, 2.4, 2.5, 2.6, 2.7.2, 2.7.3, 2.7.4, 2.7.5, 2.7.6, 2.7.7, 2.7.8, 2.7.9 and 2.7.10. Marking requirements in Annex I, paragraph 2.2 and Annex III, paragraphs 1.1.3.1, 1.1.3.2 and 1.2.

(a) in the case of a vehicle which does not have a specified passenger's seat (as defined in Regulation 17(12) of the said Regulations) for the driver's seat, and

(b) in the case of a vehicle which has a specified passenger's seat (as so defined) for—

11.4.1983
ECE Regulation 16 as revised on 9th December 1979 and corrected on 25th June 1981.Design, construction and equipment requirements in paragraphs 6.1.2, 6.2, 6.3, 6.4, 7.2, 7.3, 7.4, 7.5, 7.6, 7.7, 7.8 and 7.9. Marking requirements in paragraphs 4, 5.4.2.1 and 5.4.2.2.

(i) both the driver's seat and the specified passenger's seat, or

(ii) the driver's seat where a seat belt which complies with the requirements specified in column (3) of this Schedule is provided for the specified passenger's seat, or

(iii) the specified passenger's seat where a seat belt which complies with the requirements specified in column (3) of this Schedule is provided for the driver's seat.

1.10.1980
NOTE: this exemption applies only in respect of (ia) seat belts and (iii) installation of seat belts and does not apply in respect of (ii) seat belt anchorages.
(ii) Seat belt anchor-ages for the seats specified in Regulation 17 (4)(a) of the Construction and Use RegulationsCouncil Directive 76/115/EEC of 18th December 1975 orL24, 30.1.76, p. 6.Design, construction and equipment requirements in Annex I, paragraphs 4 and 5 and Annex III.1.10.1979
Council Directive 76/115/EEC of 18th December 1975 as amended by Council Directive 81/575/EEC of 20th July 1981 and Commission Directive 82/318/EEC of 2nd April 1982 orL24, 30.1.76, p. 6, L209, 29.7.81, p. 30 and L139, 19.5.82, p. 9.Design, construction and equipment requirements in Annex I, paragraphs 4 and 5 and Annex III.11.4.1983
ECE Regulation 14 as revised on 28th April 1976 and corrected on 4th August 1977, 19th July 1978 and in September 1979.Design, construction and equipment requirements in paragraphs 5, 6 and 7 and Annex 3.1.10.1979
(iii) Installation of seat belts (not being disabled persons' seat belts as defined in Regulation 17(12) of the Construction and Use Regulations)Council Directive 77/541/EEC of 28th June 1977 orL220, 29.8.77, p. 95.Installation requirements in Annex I, paragraphs 2.9, 3.2.2 and 3.3.1.10.1979
Council Directive 77/541/EEC of 28th June 1977 as amended by Council Directive 81/576/EEC of 20th July 1981 and Commission Directive 82/319/EEC of 2nd April 1982.L220, 29.8.77, p. 95, L209, 29.7.81, p. 32 and L139, 19.5.82, p. 17.Installation requirements in Annex I, paragraphs 2.9, 3.2.2 and 3.3.11.4.1983
13ABrakesCouncil Directive 71/320/EEC of 26th July 1971 as amended by Commission Directive 74/132/EEC of 11th February 1974 and Commission Directive 75/524/EEC of 25th July 1975.L202, 6.9.71, p. 37 (SE 1971 (III), p. 746), L74, 19.3.74, p. 7 and L236, 8.9.75, p. 3.Design, construction and equipment requirements prescribed for category M1 vehicles in Annexes I, II and VII.1.10.197830.9.1984
13BBrakesCouncil Directive 71/320/EEC of 26th July 1971 as amended by Commission Directive 74/132/EEC of 11th February 1974, Commission Directive 75/524/EEC of 25th July 1975 and Commission Directive 79/489/EEC of 18th April 1979 and corrected on 26th July 1979.L202, 6.9.71, p. 37 (SE 1971 (III), p. 746), L74, 19.3.74, p. 7, L236, 8.9.75, p. 3, L128, 26.5.79, p. 12 and L188, 26.7.79, p. 54.,Design, construction and equipment requirements prescribed for category M1 vehicles in Annexes I, II and VII.1.10.1979
13CBrakesECE Regulation 13 as revised on 4th January 1979 orDesign, construction and equipment requirements prescribed for category M1 vehicles in paragraphs 2, 5.1, 5.2.2.1, 5.3.2 and 6 and Annexes 4, 7, 10, 11 and 13.1.10.197930.9.1984
ECE Regulation 13 as revised on 4th January 1979 and amended on 11th August 1981.Design, construction and equipment requirements prescribed for category M1 vehicles in paragraphs 2, 5.1, 5.2.2.1, 5.3.2 and 6 and Annexes 4, 7, 10, 11 and 13.5.1.1982
13DBrakesECE Regulation 13 as revised on 4th January 1979 orDesign, construction and equipment requirements prescribed for category L5 vehicles in paragraphs 2, 5.1, 5.2.1.5, 5.3.1.3, 5.3.1.4, 5.3.1.5 and 6 and Annex 4.1.6.198030.9.1984
ECE Regulation 13 as revised on 4th January 1979 and amended on 11th August 1981.Design, construction and equipment requirements prescribed for category L5 vehicles in paragraphs 2, 5.1, 5.2.1.5, 5.3.1.3, 5.3.1.4, 5.3.1.5 and 6 and Annex 4.5.1.1982
14BNoise and silencersCouncil Directive 70/157/EEC of 6th February 1970 as amended by Commission Directive 73/350/EEC of 7th November 1973 and Council Directive 77/212/EEC of 8th March 1977.L42, 23.2.70, p. 16 (SE 1970 (I), p. 111), L321, 22.11.73, p. 33 and L66, 12.3.77, p. 33.Design, construction and equipment requirements in the Annex, paragraphs I.1.1, I.2, I.3, I.4, II.1, II.4 and II.6. Marking requirements in paragraph II.3.10.1.1979
14CNoise and silencersCouncil Directive 70/157/EEC of 6th February 1970 as amended by Commission Directive 73/350/EEC of 7th November 1973, Council Directive 77/212/EEC of 8th March 1977 and Commission Directive 81/334/EEC of 13th April 1981.L42, 23.2.70, p. 16 (SE 1970 (I), p. III), L321, 22.11.73, p. 33, L66, 12.3.77, p. 33 and L131, 18.5.81, p. 6.Design, construction and equipment requirements in Annex I, paragraph 5 (excluding sub-paragraphs 5.2.2.1.2 to 5.2.2.1.7 and sub-paragraph 5.2.2.4.3.3.1.2). Marking requirements in Annex I, paragraph 3.11.4.1983
15Glass in windscreens and other windows on the outsideBritish Standard Specification No. 857 (safety glass for land transport) of 1967 as amended in 1973 orDesign and construction requirements in clauses 1.3, 2.1, 2.2, 2.4, 2.5, 2.6, 3.1, 3.2, 3.4, 3.5, 3.6, 3.7 and 3.8. Marking requirements in clauses 2.3 and 3.3.1. Vehicles of which the glass in the windscreens and other windows on the outside was manufactured in France and which is marked with the letters “TP GS” or “TP GS E” followed by a number being the number of a type approval certificate issued in accordance with the provisions of the law of the French Republic.1.8.197830.9.1984
British Standard Specification No. 5282 (specification for road vehicle safety glass) of 1975 as amended in 1976 and in 1977.Design and construction requirements in clauses 4 and 5. Marking requirements in clause 8.2. Vehicles constructed to be used for police purposes where the windscreens and all other windows are constructed of safety glazing or safety glass.1.8.197830.9.1984
15AGlass in windscreens and other windows on the outsideBritish Standard Specification No. 857 (safety glass for land transport) of 1967 as amended in 1973, 1980— No. 2 amendment—and 1981.Design and construction requirements in clauses 1.3, 2.1, 2.2, 2.4, 2.5, 2.6, 2.7, 3.1, 3.2, 3.4, 3.5, 3.6, 3.7 and 3.8. Marking requirements in clauses 2.3 and 3.3.

1. Vehicles of which the glass in the windscreens and other windows on the outside was manufactured in France and which is marked with the letters “TP GS” or “TP GS E” followed by a number being the number of a type approval certificate issued in accordance with the provisions of the law of the French Republic.

2. Vehicles constructed to be used for police purposes where the windscreens and all other windows are constructed of safety glazing or safety glass.

3.6.1981
15BGlass in windscreens and other windows on the outsideBritish Standard Specification No. AU 178 (road vehicle safety glass) of 1980 orDesign and construction requirements in clauses 5 and 6. Marking requirements in clause 10.1. Vehicles of which the glass in the windscreens and other windows on the outside was manufactured in France and which is marked with the letters “TP GS” or “TP GS E” followed by a number being the number of a type approval certificate issued in accordance with the provisions of the law of the French Republic.3.6.1981
ECE Regulation 43 of 15th September 1980 as amended on 14th November 1982.

Design and construction requirements in paragraphs 6 and 7. Marking requirements in paragraph 4.

2. Vehicles constructed to be used for police purposes where the windscreens and all other windows are constructed of safety glazing or safety glass.

3.6.1981
16Seats and anchoragesCouncil Directive 74/408/EEC of 22nd July 1974 orL221, 12.8.74, p. 1.Design and construction requirements in Annex I, paragraphs 5, 6 and 7.1.8.1978
Council Directive 74/408/EEC of 22nd July 1974 as amended by Council Directive 81/577/EEC of 20th July 1981 orL221, 12.8.74, p. 1 and L209, 29.7.81, p. 34.Design and construction requirements in Annex I, paragraphs 5, 6 and 7.11.4.1983
ECE Regulation 17 as revised on 11th September 1973 orDesign and construction requirements in paragraphs 5, 6 and 7.1.8.1978
ECE Regulation 17 as revised on 11th September 1973 and amended on 9th March 1981.Design and construction requirements in paragraphs 5, 6 and 7.5.1.1982
17Tyres with a speed rating not exceeding 200 km/h in the case of diagonal (bias-ply) tyres or not exceeding 210 km/h in the case of radial-ply tyresECE Regulation 30 of 1st April 1975.Design and construction requirements in paragraph 6. Marking requirements in paragraph 3 (but excluding the requirement in paragraph 3.4 about the approval mark).

1. Vehicles not fitted with the tyres mentioned in column (2).

2. Vehicles fitted with tyres which bear on their side walls, after the figures denoting the tyre size, the code letter `C'.

1.8.1978
17ATyres with a speed rating not exceeding 200 km/h in the case of diagonal (bias-ply) tyres or not exceeding 210 km/h in the case of radial-ply tyresECE Regulation 30 of 1st April 1975 as amended on 25th September 1977 orDesign and construction requirements in paragraph 6. Marking requirements in paragraph 3 (but excluding the requirement in paragraph 3.4 about the approval mark).

1. Vehicles not fitted with the tyres mentioned in column (2).

2. Vehicles fitted with tyres which bear on their side walls, after the figures denoting the tyre size, the code letter `C'.

10.1.1979
ECE Regulation 30 of 1st April 1975 as amended on 25th September 1977, corrected on 21st June 1978 and amended on 15th March 1981.Design and construction requirements in paragraph 6. Marking requirements in paragraph 3 (but excluding the requirement in paragraph 3.4 about the approval mark).5.1.1982
18Interior fittingsCouncil Directive 74/60/EEC of 17th December 1973 as corrected on 6th August 1974 and 25th February 1977 orL38, 11.2.74, p. 2, L215, 6.8.74, p. 20 and L53, 25.2.77, p. 30.Design, construction and equipment requirements in Annex I, paragraph 5.Vehicles for which, or for a model of which there is in force on 1st October 1978 a type approval certificate or a Minister's approval certificate, if manufactured before 1st October 1985.1.10.1978
ECE Regulation 21 of 2nd June 1971 as corrected in 1972.Design, construction and equipment requirements in paragraph 5.1.10.1978
18AInterior fittingsCouncil Directive 74/60/EEC of 17th December 1973 as corrected on 6th August 1974 and 25th February 1977 and amended by Commission Directive 78/632/EEC of 19th May 1978 orL38, 11.2.74, p. 2, L215, 6.8.74, p. 20, L53, 25.2.77, p. 30 and L206, 29.7.78, p. 26.Design, construction and equipment requirements in Annex I, paragraph 5.Vehicles for which, or for a model of which there is in force on 1st October 1978 a type approval certificate or a Minister's approval certificate, if manufactured before 1st October 1985.1.10.1979
ECE Regulation 21 as revised on 8th October 1980.Design, construction and equipment requirements in paragraph 5.5.1.1982
19External projectionsCouncil Directive 74/483/EEC of 17th September 1974 orL266, 2.10.74, p. 4.Design, construction and equipment requirements in Annex I, paragraphs 1, 5 and 6.Vehicles for which, or for a model of which there is in force on 1st October 1978 a type approval certificate or a Minister's approval certificate, if manufactured before 1st October 1985.1.10.1978
ECE Regulation 26 of 28th April 1972 as amended on 11th September 1973.Design, construction and equipment requirements in paragraphs 5 and 6.1.10.1978
19AExternal projectionsCouncil Directive 74/483/EEC of 17th September 1974 as amended by Commission Directive 79/488/EEC of 18th April 1979.L266, 2.10.74, p. 4 and L128, 26.5.79, p. 1.Design, construction and equipment requirements in Annex I, paragraphs 1, 5 and 6.1 to 6.17.Vehicles for which, or for a model of which there is in force on 1st October 1978 a type approval certificate or a Minister's approval certificate, if manufactured before 1st October 1985.1.10.1979
20SpeedometersCouncil Directive 75/443/EEC of 26th June 1975 orL196, 26.7.75, p. 1.Design, construction and equipment requirements in Annex II, paragraphs 1 and 4.1.10.1978
ECE Regulation 39 of 20th November 1978.Design, construction and equipment requirements in paragraph 5.1.10.1979
21Rear fog lampsCouncil Directive 77/538/EEC of 28th June 1977 as corrected on 10th October 1978 orL220, 29.8.77, p. 60.Design and construction requirements in Annex 0, paragraphs 1, 2, 3, 4, 5 and 6. Marking requirements in Annex II, paragraph 2.1.10.1979
ECE Regulation 38 of 1st August 1978.Design and construction requirements in paragraphs 1, 5, 6, 7, 8 and 9. Marking requirements in paragraph 3.1.10.1979
22Wiper and washer systemsCouncil Directive 78/318/EEC of 21st December 1977.L81, 28.3.78, p. 49.Design and construction requirements in Annex I, paragraph 5 and Annex IV, paragraph 2.Vehicles for which, or for a model of which there is in force on 1st October 1985 a type approval certificate or a Minister's approval certificate.1.10.1985
23Defrosting and demisting systemsCouncil Directive 78/317/EEC of 21st December 1977 as corrected on 9th July 1978.L81, 28.3.78, p. 27 and L194, 19.7.78, p. 29.Design and construction requirements in Annex I, paragraph 5 and Annex IV, paragraph 2.Vehicles for which, or for a model of which there is in force on 1st October 1985 a type approval certificate or a Minister's approval certificate.1.10.1985
24Installation of lighting and signalling equipmentRegulation 16 of the Road Vehicles Lighting Regulations 1984 in sofar as it relates to items 6, 6A, 7, 8, 8A, 9 and 21 above.Design and construction requirements specified in Schedules 2, 4, 7, 10, 11, 12 and 17.1.10.1985
24AInstallation of lighting and signalling equipmentCouncil Directive 76/756/EEC of 27th July 1976 as amended by Commission Directive 80/233/EEC of 21st November 1979 and Commission Directive 82/244/EEC of 17th March 1982.L262, 27.9.76, p. 1, L51, 25.2.80, p. 8 and L109, 22.4.83, p. 31.Design and construction requirements in Annex I, paragraphs 3, 4.1, 4.2 (excepting 4.2.6), 4.5, 4.7, 4.9, 4.10, 4.11, 4.14 and Appendix 4.1.10.1985

SCHEDULE 2

PART I

(Form of information document for a vehicle)

PART II

(Form of information document for a vehicle)

PART III

(Form of information document for a vehicle part)

SCHEDULE 3

PART I

(Form of type approval certificate for a vehicle)

PART II

(Form of type approval certificate for a vehicle part)

SCHEDULE 4

PART I

(Form of Minister's approval certificate for a vehicle)

PART II

(Form of Minister's approval certificate for a vehicle part)

SCHEDULE 5

PART I

(Form of certificate of conformity for a vehicle)

PART II

(Form of certificate of conformity for a vehicle part)

SCHEDULE 6Regulations revoked by Regulation 15

TitleYear and Number
The Motor Vehicles (Type Approval) (Great Britain) Regulations 1979.S.I. 1979/1092
The Motor Vehicles (Type Approval) (Great Britain) (Amendment) Regulations 1980.S.I. 1980/879
The Motor Vehicles (Type Approval) (Great Britain) (Amendment) (No. 2) Regulations 1980.S.I. 1980/1165
The Motor Vehicles (Type Approval) (Great Britain) (Amendment) Regulations 1981.S.I. 1981/696
The Motor Vehicles (Type Approval) (Great Britain) (Amendment) (No. 2) Regulations 1981.S.I. 1981/1619
The Motor Vehicles (Type Approval) (Great Britain) (Amendment) Regulations 1982.S.I. 1982/8
The Motor Vehicles (Type Approval) (Great Britain) (Amendment) Regulations 1983.S.I. 1983/328

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made):The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources