PART IVRAISING AND LOWERING, ETC

Tests, examinations and marking of lifting appliances34

1

Subject to the provisions of paragraphs (4) and (5) of this Regulation, no lifting appliance shall be taken into use for the first time in the operations or after it has undergone any substantial alteration or repair, unless it has been tested and thoroughly examined by a competent person in the manner described in the Second Schedule to these Regulations. A certificate of such test and examination, in the prescribed form and containing the prescribed particulars, signed by the person making or responsible for the carrying out of the test and examination and specifying the safe working load or loads of the appliance, shall have been obtained and shall be available for inspection.

2

Subject as aforesaid, every lifting appliance shall be thoroughly examined by a competent person at least once in every period of twelve months and a report of the results of every such examination, containing the prescribed particulars and signed by the person making or responsible for the carrying out of the examination, shall be kept in an approved manner and shall be available for inspection. In the case of lifting appliances in a shipyard, the person by whom the report is signed shall within twenty-eight days of the completion of the examination send to the inspector for the district a copy of the report in every case where the examination shows that the lifting appliance cannot continue to be used with safety unless certain repairs are carried out immediately or within a specified time.

3

Subject as aforesaid, every lifting appliance shall have plainly marked upon it the safe working load. Every crane of variable operating radius (including a crane with a derricking jib) shall—

a

have plainly marked upon it the safe working load at various radii of the jib or crab and, in the case of a crane with a derricking jib, the maximum radius at which the jib may be worked; and

b

be fitted with an accurate indicator, clearly visible to the driver, showing the radius of the jib or crab at any time and the safe working load corresponding to that radius.

4

The foregoing provisions of this Regulation shall not apply to sheerlegs temporarily erected for the purpose of the operations.

5

This Regulation shall not apply as respects—

a

any lifting appliance to which the Docks Regulations, 1934, apply and which satisfies the requirements of those Regulations; or

b

any operation carried out on a ship not registered in the United Kingdom by means of any of the ship's engine room cranes where such cranes are used with the express authorisation and under the supervision of a competent person.