- Latest available (Revised)
- Original (As enacted)
This is the original version (as it was originally enacted).
(1)Subject to subsection (2) below, it is an offence to shorten to a length less than 24 inches the barrel of any smooth-bore gun to which section 1 of the principal Act applies other than one which has a barrel with a bore exceeding 2 inches in diameter; and that offence shall be punishable—
(a)on summary conviction, with imprisonment for a term not exceeding six months or a fine not exceeding the statutory maximum or both;
(b)on indictment, with imprisonment for a term not exceeding five years or a fine or both.
(2)It is not an offence under this section for a registered firearms dealer to shorten the barrel of a gun for the sole purpose of replacing a defective part of the barrel so as to produce a barrel not less than 24 inches in length.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: