- Latest available (Revised)
- Original (As enacted)
There are outstanding changes not yet made by the legislation.gov.uk editorial team to Weights and Measures Act 1985. Any changes that have already been made by the team appear in the content and are referenced with annotations.
Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the legislation in the affected provisions. Use the ‘more’ link to open the changes and effects relevant to the provision you are viewing.
This section lists the changes and effects yet to be applied to the whole Act, associated Parts and Chapters where applicable. This includes any insertions of whole new Parts, Chapters or provisions yet to be inserted into this Act. These effects are included in this view as they may be (but won’t necessarily be) relevant to the specific provision that you are viewing.
Whole provisions yet to be inserted into this Act (including any effects on those provisions):
This section lists the commencement orders yet to be applied to the whole Act. These effects are included in this view as they may be (but won’t necessarily be) relevant to the specific provision that you are viewing. Where applicable the commencement orders are listed under two headings, firstly those that bring some part of the Act you are viewing into force and secondly, those that bring into force legislation that affects some part of the legislation you are viewing. If you are viewing a prospective version or there is a prospective version available there may be commencement orders listed here that are relevant to the provision you are viewing.
Annotations are used to give authority for changes and other effects on the legislation you are viewing and to convey editorial information. They appear at the foot of the relevant provision or under the associated heading. Annotations are categorised by annotation type, such as F-notes for textual amendments and I-notes for commencement information (a full list can be found in the Editorial Practice Guide). Each annotation is identified by a sequential reference number. For F-notes, M-notes and X-notes, the number also appears in bold superscript at the relevant location in the text. All annotations contain links to the affecting legislation.
(a)any person makes an application for an approval, or
(b)an approval is to be, or has been, granted to any person,
the Secretary of State may require that person to pay, in respect of any work carried out by or on behalf of the Secretary of State in relation to the application or the approval, such reasonable fee as the Secretary of State may determine with the approval of the Treasury.
2(1)An approval shall be in writing and, unless previously withdrawn in accordance with any term in that behalf contained in the approval and subject to the following provisions of this Part of this Schedule, shall continue in force for such period (not exceeding five years) as may be specified in the approval.E+W+S
(a)shall specify the classes or descriptions of weighing or measuring equipment for the testing, passing as fit for use for trade and stamping of which the verifier is approved,
(b)may include such conditions as appear to the Secretary of State to be requisite or expedient having regard to the need to ensure that only such equipment as is fit for use for trade is passed as fit for such use, and
(c)shall contain conditions requiring the verifier to satisfy the requirements set out in Part II of this Schedule.
(3)Without prejudice to the generality of sub-paragraph (2) above, conditions included in an approval by virtue of that sub-paragraph may–
(a)require the verifier to comply with any direction given by the Secretary of State as to such matters as are specified in the approval or are of a description so specified;
(b)require the verifier to ensure that his procedures for the testing of weighing or measuring equipment conform with such quality standards as are specified in the approval or are of a description so specified.
3(1)If it appears to an inspector that, otherwise than in accordance with section 15A of this Act, the prescribed stamp has been, or is being, applied by an approved verifier to equipment which had not, or has not, been duly tested and passed as fit for use for trade, he may give to the verifier a notice (a “suspension notice”) suspending the verifier’s approval (either generally or in relation to particular areas or places) for a period not exceeding 28 days.E+W+S
(2)Where an inspector gives a suspension notice, he shall forthwith send a copy of the notice to the Secretary of State and inform the approved verifier in writing of–
(a)the circumstances which have led to the giving of the notice;
(b)the date on which the notice takes effect; and
(c)the effect of the following provisions of this paragraph.
(3)An approved verifier who has taken steps to prevent a recurrence of the circumstances which led to the giving of a suspension notice may apply to the inspector for the suspension to be withdrawn before the expiry of the specified period; and an application under this sub-paragraph–
(a)shall be made by notice to the inspector given not later than 21 days after the date of the suspension notice, and
(b)shall state the steps taken to prevent such a recurrence.
(4)An inspector shall consider any application made to him under sub-paragraph (3) above and, having done so, shall notify the approved verifier of his decision.
(5)An approved verifier who is aggrieved by a suspension notice may apply to the Secretary of State to review the suspension; and an application under this sub-paragraph–
(a)shall be made by notice to the Secretary of State given not later than 21 days after the date of the suspension notice, and
(b)shall state the grounds on which the application is made.
(6)The Secretary of State shall consider any application under sub-paragraph (5) above and, having done so, shall notify the approved verifier and the inspector of his decision.
(7)Where the Secretary of State decides under sub-paragraph (6) above to uphold the suspension, he shall also notify the approved verifier and the inspector of the grounds for his decision.
(8)Where the Secretary of State decides under sub-paragraph (6) above not to uphold the suspension, he shall instruct the inspector to withdraw the suspension.
4(1)Subject to sub-paragraph (2) below, the Secretary of State may by written notice withdraw an approval if at any time during the continuance of the approval–E+W+S
(a)he is of the opinion that if the approval had expired at that time he would have been minded not to grant a further approval;
(b)it appears to him on reasonable grounds that the verifier is, or has been, in breach of any condition contained in the approval; or
(c)any fee due to the Secretary of State by virtue of a requirement made by him under paragraph 1 above has not been paid.
(2)Except where the Secretary of State considers in the circumstances of any particular case that it is necessary for him to withdraw an approval without delay, he shall not withdraw an approval unless he has given the verifier at least 28 days written notice of his intention to do so and of the grounds for withdrawal.
(3)Where the Secretary of State withdraws an approval without giving the notice required by sub-paragraph (2) above, he shall, at or before the time when the withdrawal takes effect, give the verifier written notice of the grounds for withdrawal and of his reasons for considering it necessary to withdraw the approval without delay.
(4)Where a verifier receives notice under sub-paragraph (2) or (3) above, he may within 21 days of receipt of the notice make representations in writing to the Secretary of State.
(5)The Secretary of State shall consider any representations so made and, having done so, shall notify the verifier of his decision.
5(1)Where the Secretary of State decides, whether in the light of representations or otherwise, that an approval which has been withdrawn should not have been withdrawn, he shall as soon as reasonably practicable grant a new approval to the former verifier.E+W+S
(2)The new approval shall expire on the date on which the withdrawn approval would have expired and (except as may otherwise be agreed with the former verifier) shall be subject to the same terms and conditions as the withdrawn approval.
(3)Where the Secretary of State grants a new approval under sub-paragraph (1) above, the verifier shall be deemed to have remained approved for the period beginning on the date on which the original approval was withdrawn and ending on the date on which the new approval took effect.
6(1)This paragraph applies where, not less than three months before the end of the period specified in an approval as the period for which the approval is to continue in force, the verifier applies to the Secretary of State for the grant of a further approval in the same, or substantially the same, terms as those of the existing approval.E+W+S
(2)The existing approval shall remain in force until the Secretary of State gives the verifier notice of the Secretary of State’s decision with respect to the application.]
The Whole Act you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Whole Act you have selected contains over 200 provisions and might take some time to download.
Would you like to continue?
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made):The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: