- Latest available (Revised)
- Original (As enacted)
- Point in Time (09/05/1991)
Point in time view as at 09/05/1991. This version of this provision has been superseded.![]()
You are viewing this legislation item as it stood at a particular point in time. A later version of this or provision, including subsequent changes and effects, supersedes this version.
Note the term provision is used to describe a definable element in a piece of legislation that has legislative effect – such as a Part, Chapter or section.
There are outstanding changes not yet made by the legislation.gov.uk editorial team to Mines And Quarries (Tips) Act 1969. Any changes that have already been made by the team appear in the content and are referenced with annotations.![]()
Changes and effects yet to be applied by the editorial team are only applicable when viewing the latest version or prospective version of legislation. They are therefore not accessible when viewing legislation as at a specific point in time. To view the ‘Changes to Legislation’ information for this provision return to the latest version view using the options provided in the ‘What Version’ box above.
(1)Provision may be made by regulations for requiring that, in the case of every active or closed tip of a prescribed class or description, the person having responsibility for the tip shall keep at the office at the mine or quarry with which the tip is associated or at such other place as may be approved by an inspector accurate plans and sections of the tip and of the strata underlying it, being plans or, as the case may be, sections complying with such requirements as are imposed by or by virtue of subsection (2) below; and regulations made by virtue of this subsection may require that plans and sections be so kept as at any time to disclose the extent of the tip delineated thereon both up to a day not earlier than such previous day as may be prescribed and up to a distance from its position at that time not greater than such as may be prescribed.
(2)Plans and sections required to be kept by virtue of subsection (1) above shall be of durable material and be prepared in such form and manner as may be specified by rules made by [F1the Secretary of State] and on a scale not less than such as may be so specified and any such plans and sections shall record such information as may be so specified with respect to situation, contours, boundaries, the nature of the refuse deposited and any such other matters (whether similar to those specially mentioned in this subsection or not) as may be so specified.
(3)If it appears to an inspector that any information which, by virtue of the preceding provisions of this section, is required to be recorded on a plan or section required to be kept by the person having responsibility for an active or closed tip cannot be recorded thereon fully and clearly, he may serve on that person a notice requiring him to keep at the office at the mine or quarry with which the tip is associated or at such other place as may be approved by an inspector such supplementary plan, section or drawing specified in the notice as appears to the inspector by whom the notice is served to be requisite for the purpose of recording that information fully and clearly.
(4)For the purposes of this section the person having responsibility for a tip is—
(a)in the case of a tip which is associated with a quarry, the owner of the quarry; and
(b)in the case of an active tip which is associated with a mine, the manager of the mine; and
(c)in the case of a closed tip which is associated with a mine, the owner of the mine.
Annotations are used to give authority for changes and other effects on the legislation you are viewing and to convey editorial information. They appear at the foot of the relevant provision or under the associated heading. Annotations are categorised by annotation type, such as F-notes for textual amendments and I-notes for commencement information (a full list can be found in the Editorial Practice Guide). Each annotation is identified by a sequential reference number. For F-notes, M-notes and X-notes, the number also appears in bold superscript at the relevant location in the text. All annotations contain links to the affecting legislation.
Amendments (Textual)
F1Words substituted by virtue of S.I. 1969/1498, arts. 2(1), 5(6) and 1970/1537, arts. 2(2), 7(4)
Modifications etc. (not altering text)
C1Ss. 1–10 amended by S.I. 1990/1380, regs. 3, 4
Ss. 1-10 saved by virtue of Health and Safety at Work Act 1974 (c. 37, SIF 43:3), s. 53, Sch. 1 and Tay Road Bridge Order Confirmation Act 1991 (c. iv), Sch. Pt. VII, s. 62
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made):The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: