| Column 1 | Column 2 | Column 3 | Column 4 |
|---|---|---|---|
| Item | Parameters | Units of Measurement | Concentration or Value (maximum unless otherwise stated) |
Notes: 1. The concentration (mg/l) of nitrate divided by 50 added to the concentration (mg/l) of nitrite divided by 3 must not exceed 1. 2. Excluding tritium, potassium 40, radon and radon decay products. | |||
| 1. | Colour | mg/1 Pt/Co scale | 20 |
| 2. | Turbidity | NTU | 4 |
| 3. | Odour | Dilution number | 3 at 25°C |
| 4. | Taste | Dilution number | 3 at 25°C |
| 5. | Sulphate | mg SO4/1 | 250 |
| 6. | Sodium | mg Na/l | 200 |
| 7. | Nitrate | mg NO3/l | 50 (note 1) |
| 8. | Nitrite | mg NO2/l | 0.5 (note 1) |
| 9. | Aluminium | μgAl/l | 200 |
| 10. | Copper | mg Cu/l | 2 |
| 11. | Fluoride | mg F/l | 1.5 |
| 12. | Hydrogen ion concentration | pH units | 4.5 (minimum) 9.5 (maximum) |
| 13. | Tritium (for radioactivity) | Bq/l | 100 |
| 14. | Total indicative dose | mSv/year | 0.10 (note 2) |
| 15. | Manganese | μg Mn/l | 50 |
| Column 1 | Column 2 | Column 3 | Column 4 |
|---|---|---|---|
| Item | Parameters | Units of Measurement | Maximum Concentration |
Notes: 1. Pesticides” means:
related products (inter alia, growth regulators) and their relevant metabolites, degradation and reaction products. Only those pesticides which are likely to be present in a given water need to be monitored. 2. The maximum concentration applies to each individual pesticide. In the case of aldrin, dieldrin, heptaclor and heptachlor epoxide the maximum concentration is 0.030 μg/l. 3. The maximum concentration for “total substances” refers to the sum of the concentrations of all individual pesticides detected and quantified in the monitoring procedure. 4. The specified compounds are benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(ghi)perylene, indeno(1.2,3 cd) pyrene. | |||
| 1. | Arsenic | μg As/l | 10 |
| 2. | Cadmium | μg Cd/l | 5 |
| 3. | Cyanide | μg CN/l | 50 |
| 4. | Chromium | μg Cr/l | 50 |
| 5. | Mercury | μg Hg/l | 1 |
| 6. | Nickel | μg Ni/l | 20 |
| 7. | Selenium | μg Se/l | 10 |
| 8. | Antimony | μg Sb/l | 5 |
| 9. | Lead | μg Pb/l | 10 |
| 10. | Pesticides and related products: | ||
| – individual substances | μg/l | 0.10 (notes 1 and 2) | |
| – total substances | μg/l | 0.50 (notes 1 and 3) | |
| 11. | Polycyclic aromatic Hydrocarbons | μg/l | 0.1 sum of concentrations of specified compounds (note 4) |
| 12. | Bromate | μg BrO3/l | 10 |
| Column 1 | Column 2 | Column 3 | Column 4 |
|---|---|---|---|
| Item | Parameters | Units of Measurement | Maximum Concentration |
Notes: 1. The total viable colony count should be measured within 12 hours of bottling, with the sample water being kept at a constant temperature during that 12 hour period. Any increase in the total viable colony count of the water between 12 hours after bottling and the time of sale should not be greater than that normally expected. 2. In 72 hours on agar-agar or an agar-gelatine mixture. 3. In 24 hours on agar-agar. | |||
| 1. | Escherichia coli (E.coli) | number/250 ml | 0/250 ml |
| 2. | Enterococci | number/250 ml | 0/250 ml |
| 3. | Colony count 22°C | number/ml | 100/ml (notes 1 and 2) |
| 4. | Colony count 37°C | number/ml | 20/ml (notes 1 and 3) |
| 5. | Pseudomonas aeruginosa | number/250/ml | 0/250 ml |
| Column 1 | Column 2 | Column 3 | Column 4 |
|---|---|---|---|
| Item | Parameters | Unit of Measurements | Maximum Concentration |
Notes: 1. The maximum concentration specified applies to the sum of the concentrations of the specified parameters. 2. The parametric value refers to the residual monomer concentration in the water as calculated according to specifications of the maximum release from the corresponding polymer in contact with the water. | |||
| 1. | Boron | Mg B/l | 1.0 |
| 2. | Benzo (a) pyrene | μg/l | 0.010 |
| 3. | Tetrachloroethene and Trichloroethene | μg/l | 10 (note 1) |
| 4. | Tetrachloromethane | μg/l | 3 |
| 5. | Benzene | μg/l | 1.0 |
| 6. | 1,2-dichloroethane | μg/l | 3.0 |
| 7. | Trichloromethane, Dichlororbromomethane, Dibromochloromethane and Tribromomethane | μg/l | 100 (note 1) |
| 8. | Epichlorohydrin | μg/l | 0.10 (note 2) |
| 9. | Vinyl chloride | μg/l | 0.50 (note 2) |
| 10. | Acrylamide | μg/l | 0.10 (note 2) |