xmlns:atom="http://www.w3.org/2005/Atom"

Part IVSpecified Risk Material

Rendering plants

Rendered material

67.—(1) After any specified risk material has been rendered at a licensed rendering plant the operator of the plant shall ensure that the rendered material is placed in a container labelled “specified risk material” and disposed of–

(a)by burial at a landfill site for which there exists a current waste management licence granted under section 35 of the Environmental Protection Act 1990, or permit granted under the Pollution Prevention and Control (Scotland) Regulations 2000(1) or the Pollution Prevention and Control (England and Wales) Regulations 2000(2);

(b)as specified in the licence; or

(c)by sending to a licensed incinerator.

(2) An operator of a licensed rendering plant shall ensure that rendered material produced from any specified risk material–

(a)is consigned from the plant for disposal by burial; or

(b)is disposed of by burial,

unless the specified risk material has been processed at the plant in accordance with method 4 prescribed in Part II of Schedule 6 to these Regulations.

(3) Material rendered from animal material, other than specified risk material from scheme animals, shall be disposed of by burning in a manner which has been authorised under the Environmental Protection Act 1990, the Pollution Prevention and Control (Scotland) Regulations 2000 or the Pollution Prevention and Control (England and Wales) Regulations 2000.