xmlns:atom="http://www.w3.org/2005/Atom"

Regulation 10(3)(d) (Annex IX to the ATEX Directive)

SCHEDULE 11Module: Unit verification

1.  This module describes the procedure whereby the manufacturer ensures and declares that the equipment or protective system which has been issued with the certificate referred to in paragraph 2 conforms to the requirements of the ATEX Directive which are applicable to it. The manufacturer or his authorised representative established in the Community shall affix the CE marking to the equipment or protective system and draw up a declaration of conformity.

2.  The notified body shall examine the individual equipment or protective system and carry out the appropriate tests as set out in the relevant standard(s) referred to in Article 5 of the ATEX Directive, or equivalent tests, to ensure its conformity with the relevant requirements of the ATEX Directive.

The notified body shall affix, or cause to be affixed, its identification number on the approved equipment or protective system and shall draw up a certificate of conformity concerning the tests carried out.

3.  The aim of the technical documentation is to enable conformity with the requirements of the ATEX Directive to be assessed and the design, manufacture and operation of the equipment or protective system to be understood.

The documentation shall contain: