Search Legislation

Weights and Measures Act 1985

 Help about what version

What Version

 Help about advanced features

Advanced Features

Changes over time for: Section 11

 Help about opening options

Changes to legislation:

There are currently no known outstanding effects for the Weights and Measures Act 1985, Section 11. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.

11 Certain equipment to be passed and stamped by inspector.E+W+S

(1)The provisions of this section shall apply to the use for trade of weighing or measuring equipment of such classes or descriptions as may be prescribed.

(2)No person shall use any article for trade as equipment to which this section applies, or have any article in his possession for such use, unless that article, or equipment to which this section applies in which that article is incorporated or to the operation of which the use of that article is incidental,—

(a)has been passed by an inspector [F1or approved verifier] as fit for such use, and

(b)except as otherwise expressly provided by or under this Act, bears a stamp indicating that it has been so passed which remains undefaced otherwise than by reason of fair wear and tear.

(3)If any person contravenes subsection (2) above, he shall be guilty of an offence and any article in respect of which the offence was committed shall be liable to be forfeited.

(4)Any person requiring any equipment to which this section applies to be passed [F1by an inspector]as fit for use for trade shall submit the equipment, in such manner as the local weights and measures authority may direct, to [F2the inspector] who (subject to the provisions of this Act and of any regulations under section 15 below) shall—

(a)test the equipment by means of such local or working standards and testing equipment as he considers appropriate or, subject to any conditions which may be prescribed, by means of other equipment which has already been tested and which the inspector considers suitable for the purpose,

(b)if the equipment submitted falls within the prescribed limits of error and by virtue of subsection (10) below is not required to be stamped as mentioned in paragraph (c) of this subsection, give to the person submitting it a statement in writing to the effect that it is passed as fit for use for trade, and

(c)except as otherwise expressly provided by or under this Act, cause it to be stamped with the prescribed stamp.

[F3(4A)An approved verifier may (subject to the provisions of this Act, to any regulations under section 15 below and to any conditions included in his approval)–

(a)test any equipment to which this section applies by means of other equipment which has already been tested and which the verifier considers suitable for the purpose,

(b)if the equipment being tested falls within the prescribed limits of error and by virtue of subsection (10) below is not required to be stamped as mentioned in paragraph (c) below, make a statement in writing to the effect that it is passed fit for use for trade, and

(c)except as otherwise expressly provided for by or under this Act, stamp it with the prescribed stamp.]

(5)There shall be charged in respect of any test carried out under subsection (4) above such reasonable fees as the local weights and measures authority may determine.

(6)An inspector shall keep a record of every test carried out by him under subsection (4) above.

[F4(6A)In this Act approved verifier, in relation to weighing or measuring equipment of any class or description, means a person who is for the time being approved under section 11A below in relation to the testing, passing and stamping of weighing or measuring equipment of that class or description.]

(7)Except as otherwise expressly provided by or under this Act, no weight or measure shall be stamped as mentioned in subsection (4)(c) [F5or (4A)(c)]above unless it has been marked in the prescribed manner with its purported value.

(8)Subject to subsection (9) below, where any equipment submitted to an inspector under subsection (4) above is of a pattern in respect of which a certificate of approval granted under section 12 below is for the time being in force, the inspector shall not refuse to pass or stamp the equipment on the ground that it is not suitable for use for trade.

(9)If the inspector is of opinion that the equipment is intended for use for trade for a particular purpose for which it is not suitable, he may refuse to pass or stamp it until the matter has been referred to the Secretary of State, whose decision shall be final.

(10)The requirements of subsections (2), [F6(4), (4A) and (7)] above with respect to stamping and marking shall not apply to any weight or measure which is too small to be stamped or marked in accordance with those requirements.

(11)Where a person submits equipment to an inspector under this section, the inspector may require the person to provide the inspector with such assistance in connection with the testing of the equipment as the inspector reasonably considers it necessary for the person to provide and shall not be obliged to proceed with the test until the person provides it; but a failure to provide the assistance shall not constitute an offence under section 81 below.

(12)If an inspector refuses to pass as fit for use for trade any equipment submitted to him under this section and is requested by the person by whom the equipment was submitted to give reasons for the refusal, the inspector shall give to that person a statement of those reasons in writing.

(13)In the case of any equipment which is required by regulations made under section 15 below to be passed and stamped under this section only after it has been installed at the place where it is to be used for trade, if after the equipment has been so passed and stamped it is dismantled and reinstalled, whether in the same or some other place, it shall not be used for trade after being so reinstalled until it has again been passed under this section.

(14)If any person—

(a)knowingly uses any equipment in contravention of sub-section (13) above, or

(b)knowingly causes or permits any other person so to use it, or

(c)knowingly that the equipment is required by virtue of subsection (13) above to be again passed under this section, disposes of it to some other person without informing him of that requirement,

he shall be guilty of an offence and the equipment shall be liable to be forfeited.

(15)Subject to subsection (13) above, a stamp applied to any equipment under this section shall have the like validity throughout Great Britain as it has in the place in which it was originally applied, and accordingly that equipment shall not be required to be re-stamped because it is used in any other place.

(16)If at any time the Secretary of State is satisfied that, having regard to the law for the time being in force in Northern Ireland, any of the Channel Islands or the Isle of Man, it is proper so to do, he may by order provide for any equipment to which this section applies duly stamped in accordance with that law, or treated for the purposes of that law as if duly stamped in accordance with it, to be treated for the purposes of this Act as if it had been duly stamped in Great Britain under this section.

Textual Amendments

F1Words in s. 11(2)(a)(4) inserted (29.3.1999) by S.I. 1999/503, art. 2(1)(2)

F2Words in s. 11(4) substituted (29.3.1999) by S.I. 1999/503, art. 2(2)

F3S. 11(4A) inserted (29.3.1999) by S.I. 1999/503, art. 2(3)

F4S. 11(6A) inserted (29.3.1999) by S.I. 1999/503, art. 2(4)

F5Words in s. 11(7) inserted (29.3.1999) by S.I. 1999/503, art. 2(5)

F6Words in s. 11(10) substituted (29.3.1999) by S.I. 1999/503, art. 2(6)

Modifications etc. (not altering text)

C1S. 11 modified (1.1.1993) by S.I. 1992/1591, art. 2.

S. 11 modified (1.1.1993) by S.I. 1992/1592, art. 2.

S. 11 modified (1.1.1993) by S.I. 1992/1593, art. 2.

Back to top

Options/Help

Print Options

You have chosen to open The Whole Act

The Whole Act you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

You have chosen to open The Whole Act as a PDF

The Whole Act you have selected contains over 200 provisions and might take some time to download.

Would you like to continue?

You have chosen to open the Whole Act

The Whole Act you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Close

See additional information alongside the content

Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources