Search Legislation

Council Directive of 15 July 1991 concerning the placing of plant protection products on the market (91/414/EEC) (repealed)

 Help about what version

What Version

Close

This is a legislation item that originated from the EU

After exit day there will be three versions of this legislation to consult for different purposes. The legislation.gov.uk version is the version that applies in the UK. The EU Version currently on EUR-lex is the version that currently applies in the EU i.e you may need this if you operate a business in the EU.

The web archive version is the official version of this legislation item as it stood on exit day before being published to legislation.gov.uk and any subsequent UK changes and effects applied. The web archive also captured associated case law and other language formats from EUR-Lex.

Status:

EU Directives are being published on this site to aid cross referencing from UK legislation. After IP completion day (31 December 2020 11pm) no further amendments will be applied to this version.

  1. Introductory Text

  2. Scope

    1. Article 1.. . . . . . . . . ....

  3. Definitions

    1. Article 2.. . . . . . . . . ....

  4. General provisions

    1. Article 3.. . . . . . . . . ....

  5. Granting, review and withdrawal of authorizations of plant protection products

    1. Article 4.. . . . . . . . . ....

  6. Inclusion of active substances in Annex I

    1. Article 5.. . . . . . . . . ....

    2. Article 6.. . . . . . . . . ....

  7. Information on potentially harmful effects

    1. Article 7.. . . . . . . . . ....

  8. Transitional measures and derogations

    1. Article 8.. . . . . . . . . ....

  9. Application for authorization

    1. Article 9.. . . . . . . . . ....

  10. Mutual recognition of authorizations

    1. Article 10.. . . . . . . . . ....

    2. Article 11.. . . . . . . . . ....

  11. Exchange of information

    1. Article 12.. . . . . . . . . ....

  12. Data requirements, data protection and confidentiality

    1. Article 13.. . . . . . . . . ....

    2. Article 14.. . . . . . . . . ....

  13. Packaging and labelling of plant protection products

    1. Article 15.. . . . . . . . . ....

    2. Article 16.. . . . . . . . . ....

  14. Control measures

    1. Article 17.. . . . . . . . . ....

  15. Administrative provisions

    1. Article 18.. . . . . . . . . ....

    2. Article 19.. . . . . . . . . ....

    3. Article 20.. . . . . . . . . ....

    4. Article 21.. . . . . . . . . ....

  16. Research and development

    1. Article 22.. . . . . . . . . ....

  17. Implementation of the Directive

    1. Article 23.. . . . . . . . . ....

    2. Article 24.. . . . . . . . . ....

    1. ANNEX I

      1. . . . . . . . . . ....

    2. ANNEX II

      REQUIREMENTS FOR THE DOSSIER TO BE SUBMITTED FOR THE INCLUSION OF AN ACTIVE SUBSTANCE IN ANNEX I

      1. INTRODUCTION

        1. 1.1. . . . . . . . . . ....

        2. 1.2. . . . . . . . . . ....

        3. 1.3. . . . . . . . . . ....

        4. 1.4. . . . . . . . . . ....

        5. 1.5. . . . . . . . . . ....

        6. 1.6. . . . . . . . . . ....

        7. 2.1. . . . . . . . . . ....

        8. 2.2. . . . . . . . . . ....

        9. 2.3. . . . . . . . . . ....

        10. 2.4. . . . . . . . . . ....

      2. PART A Chemical substances

        1. 1. Identity of the active substance

          1. 1.1. Applicant (name, address, etc.)

          2. 1.2. Manufacturer (name, address, including location of plant)

          3. 1.3. Common name proposed or ISO-accepted, and synonyms

          4. 1.4. Chemical name (IUPAC and CA nomenclature)

          5. 1.5. Manufacturer's development code number(s)

          6. 1.6. CAS, EEC and CIPAC numbers (if available)

          7. 1.7. Molecular and structural formula, molecular mass

          8. 1.8. Method of manufacture (synthesis pathway) of the active substance

          9. 1.9. Specification of purity of the active substance in g/kg

          10. 1.10. Identity of isomers, impurities and additives (e.g. stabilizers), together with...

          11. 1.11. Analytical profile of batches

        2. 2. Physical and chemical properties of the active substance

          1. 2.1. Melting point and boiling point

            1. 2.1.1. . . . . . . . . . ....

            2. 2.1.2. . . . . . . . . . ....

            3. 2.1.3. . . . . . . . . . ....

          2. 2.2. Relative density

          3. 2.3. Vapour pressure (in Pa), volatility (e.g. Henry's law constant)

            1. 2.3.1. . . . . . . . . . ....

            2. 2.3.2. . . . . . . . . . ....

          4. 2.4. Appearance (physical state, colour and odour; if known)

            1. 2.4.1. . . . . . . . . . ....

            2. 2.4.2. . . . . . . . . . ....

          5. 2.5. Spectra (UV/VIS, IR, NMR, MS), molecular extinction at relevant wavelengths...

            1. 2.5.1. . . . . . . . . . ....

            2. 2.5.2. . . . . . . . . . ....

          6. 2.6. Solubility in water including effect of pH (4 to 10)...

          7. 2.7. Solubility in organic solvents

          8. 2.8. Partition coefficient n-octanol/water including effect of pH (4 to 10)...

          9. 2.9. Stability in water, hydrolysis rate, photochemical degradation, quantum yield and...

            1. 2.9.1. . . . . . . . . . ....

            2. 2.9.2. . . . . . . . . . ....

            3. 2.9.3. . . . . . . . . . ....

            4. 2.9.4. . . . . . . . . . ....

          10. 2.10. Stability in air, photochemical degradation, identity of breakdown product(s)

          11. 2.11. Flammability including auto-flammability

            1. 2.11.1. . . . . . . . . . ....

            2. 2.11.2. . . . . . . . . . ....

          12. 2.12. Flash point

          13. 2.13. Explosive properties

          14. 2.14. Surface tension

          15. 2.15 Oxidizing properties

        3. 3. Further information on the active substance

          1. 3.1. Function, e.g. fungicide, herbicide, insecticide, repellant, growth regulator

          2. 3.2. Effects on harmful organisms, e.g. contact poison, inhalation poison, stomach...

            1. 3.2.1. . . . . . . . . . ....

            2. 3.2.2. . . . . . . . . . ....

          3. 3.3. Field of use envisaged, e.g. field, protected crops, storage of...

          4. 3.4. Harmful organisms controlled and crops or products protected or treated...

            1. 3.4.1. . . . . . . . . . ....

            2. 3.4.2. . . . . . . . . . ....

            3. 3.4.3 . . . . . . . . . ....

          5. 3.5. Mode of action

            1. 3.5.1. . . . . . . . . . ....

            2. 3.5.2. . . . . . . . . . ....

            3. 3.5.3. . . . . . . . . . ....

          6. 3.6. Information on the occurrence or possible occurrence of the development...

          7. 3.7. Recommended methods and precautions concerning handling, storage, transport or fire...

          8. 3.8. Procedures for destruction or decontamination

            1. 3.8.1. Controlled incineration

            2. 3.8.2. Others

          9. 3.9. Emergency measures in case of an accident

        4. 4. Analytical methods

          1. Introduction

          2. 4.1. Methods for the analysis of the active substance as manufactured...

            1. 4.1.1. . . . . . . . . . ....

            2. 4.1.2. . . . . . . . . . ....

            3. 4.1.3. . . . . . . . . . ....

              1. 4.1.3.1. . . . . . . . . . ....

              2. 4.1.3.2. . . . . . . . . . ....

              3. 4.1.3.3. . . . . . . . . . ....

              4. 4.1.3.4. . . . . . . . . . ....

          3. 4.2. Methods for the determination of residues

            1. 4.2.1. . . . . . . . . . ....

            2. 4.2.2. . . . . . . . . . ....

            3. 4.2.3. . . . . . . . . . ....

            4. 4.2.4. . . . . . . . . . ....

            5. 4.2.5. . . . . . . . . . ....

        5. 5. Toxicological and metabolism studies

          1. Introduction

          2. 5.1. Studies on absorption, distribution, excretion and metabolism in mammals

            1. Aim of the test:

            2. Circumstances in which required

            3. Test guideline

          3. 5.2. Acute toxicity

            1. 5.2.1. Oral

              1. Circumtances in which required

              2. Test guideline

            2. 5.2.2. Percutaneous

              1. Circumstances in which required

              2. Test guideline

            3. 5.2.3. Inhalation

              1. Circumstances in which required

              2. Test guideline

            4. 5.2.4. Skin irritation

              1. Aim of the test

              2. Circumstances in which required

              3. Test guideline

            5. 5.2.5. Eye irritation

              1. Aim of test

              2. Circumstances in which required

              3. Test guidelines

            6. 5.2.6. Skin sensitization

              1. Aim of test

              2. Circumstances in which required

              3. Test guideline

          4. 5.3. Short-term toxicity

            1. 5.3.1. Oral 28-day study

              1. Circumstances in which required

              2. Test guideline

            2. 5.3.2. Oral 90-day study

              1. Circumstances in which required

              2. Test guidelines

            3. 5.3.3. Other routes

              1. Circumstances in which required

              2. Test guidelines

          5. 5.4. Genotoxicity testing

            1. Aim of the test

            2. 5.4.1. In vitro studies

              1. Circumstances in which required

              2. Test guidelines

            3. 5.4.2. In vivo studies in somatic cells

              1. Circumstances in which required

              2. Test guidelines

            4. 5.4.3. In vivo studies in germ cells

              1. Circumstances in which required

          6. 5.5. Long term toxicity and carcinogenicity

            1. Aim of the test

            2. Circumstances in which required

            3. Test conditions

            4. Test guideline

          7. 5.6. Reproductive toxicity

            1. 5.6.1. Multi-generation studies

              1. Aim of the test

              2. Circumstances in which required

              3. Test guideline

              4. Supplementary studies

            2. 5.6.2. Developmental toxicity studies

              1. Aim of the test

              2. Circumstances in which required

              3. Test conditions

              4. Test guideline

          8. 5.7. Delayed neurotoxicity studies

            1. Aim of the test

            2. Circumstances in which required

            3. Test guidelines

          9. 5.8. Other toxicological studies

            1. 5.8.1. Toxicity studies of metabolites as referred to in the introduction...

            2. 5.8.2. Supplementary studies on the active substance

          10. 5.9. Medical data

            1. 5.9.1. Medicinal surveillance on manufacturing plant personnel

            2. 5.9.2. Direct observation, e.g.: clinical cases and poisoning incidents

            3. 5.9.3. Observations on exposure of the general population and epidemiological studies...

            4. 5.9.4. Diagnosis of poisoning (determination of active substance, metabolites), specific signs...

            5. 5.9.5. Proposed treatment: first aid measures, antidotes, medical treatment

            6. 5.9.6. Expected effects of poisoning

          11. 5.10. Summary of mammalian toxicity and overall evaluation

        6. 6. Residues in or on treated products, food and feed

          1. Introduction

          2. 6.1. Metabolism, distribution and expression of residue in plants

            1. Aim of the tests

            2. Circumstances in which required

            3. Test conditions

          3. 6.2. Metabolism, distribution and expression of residue in livestock

            1. Aim of tests

            2. Circumstances in which required

          4. 6.3. Residue trials

            1. Aim of the tests

            2. Circumstances in which required

            3. Test conditions

          5. 6.4. Livestock feeding studies

            1. Aim of the tests

            2. Circumstances in which required

            3. Test conditions

          6. 6.5. Effects of industrial processing and/or household preparations

            1. Circumstances in which required

            2. 6.5.1. Effects on the nature of the residue

              1. Aim of the tests

              2. Test conditions

            3. 6.5.2. Effects on the residue levels

              1. Aim of the tests

              2. Test conditions

          7. 6.6. Residues in succeeding crops

            1. Aim of the test

            2. Circumstances in which required

            3. Test conditions

          8. 6.7. Proposed maximum residue levels (MRLs) and residue definiton

          9. 6.8. Proposed pre-harvest intervals for envisaged uses, or withholding periods or...

          10. 6.9. Estimation of the potential and actual exposure through diet and...

          11. 6.10. Summary and evaluation of residue behaviour

        7. 7. Fate and behaviour in the environment

          1. Introduction

          2. 7.1. Fate and behaviour in soil

            1. 7.1.1. Route and rate of degradation

              1. 7.1.1.1. . . . . . . . . . ....

                1. 7.1.1.1.1. . . . . . . . . . ....

                2. 7.1.1.1.2. . . . . . . . . . ....

              2. 7.1.1.2. . . . . . . . . . ....

                1. 7.1.1.2.1. . . . . . . . . . ....

                2. 7.1.1.2.2. . . . . . . . . . ....

            2. 7.1.2. Adsorption and desorption

            3. 7.1.3. Mobility in the soil

              1. 7.1.3.1. . . . . . . . . . ....

              2. 7.1.3.2. . . . . . . . . . ....

              3. 7.1.3.3. . . . . . . . . . ....

          3. 7.2. Fate and behaviour in water and air

            1. 7.2.1. Route and rate of degradation in aquatic systemes (as far...

              1. 7.2.1.1. . . . . . . . . . ....

              2. 7.2.1.2. . . . . . . . . . ....

              3. 7.2.1.3. Biological degradation

                1. 7.2.1.3.1. . . . . . . . . . ....

                2. 7.2.1.3.2. . . . . . . . . . ....

              4. 7.2.1.4. . . . . . . . . . ....

            2. 7.2.2. Route and rate of degradation in air (as far as...

          4. 7.3. Definition of the residue

          5. 7.4. Monitoring data

        8. 8. Ecotoxicological studies

          1. Introduction

          2. Test substance

          3. Test organisms

          4. 8.1. Effects on birds

            1. 8.1.1. . . . . . . . . . ....

              1. Aim of the test

              2. Circumstances in which required

              3. Test conditions

              4. Test guideline

            2. 8.1.2. . . . . . . . . . ....

              1. Aim of the test

              2. Circumstances in which required

              3. Test conditions

              4. Test guideline

            3. 8.1.3. . . . . . . . . . ....

              1. Aim of the test

              2. Circumstances in which required

              3. Test guideline

          5. 8.2. Effects on aquatic organisms

            1. 8.2.1. . . . . . . . . . ....

              1. Aim of the test

              2. Circumstances in which required

              3. Test conditions

              4. Test guideline

            2. 8.2.2. . . . . . . . . . ....

              1. Circumstances in which required

              2. 8.2.2.1. . . . . . . . . . ....

                1. Aim of the test

                2. Test conditions

              3. 8.2.2.2. . . . . . . . . . ....

                1. Aim of the test

                2. Test guideline

              4. 8.2.2.3. . . . . . . . . . ....

                1. Aim of the test

                2. Test conditions

            3. 8.2.3. . . . . . . . . . ....

              1. Aim of the test

              2. Circumstances in which required

              3. Test guideline

            4. 8.2.4. . . . . . . . . . ....

              1. Aim of the test

              2. Circumstances in which required

              3. Test guideline

            5. 8.2.5. . . . . . . . . . ....

              1. Aim of the test

              2. Circumstances in which required

              3. Test conditions

              4. Test guideline

            6. 8.2.6. . . . . . . . . . ....

              1. Aim of the test

              2. Circumstances in which required

              3. Test guideline

            7. 8.2.7. . . . . . . . . . ....

              1. Aim of test

              2. Circumstances in which required

              3. Test conditions

            8. 8.2.8. . . . . . . . . . ....

          6. 8.3. Effect on arthropods

            1. 8.3.1. . . . . . . . . . ....

              1. 8.3.1.1. . . . . . . . . . ....

                1. Aim of the test

                2. Circumstances in which required

                3. Test guideline

              2. 8.3.1.2. . . . . . . . . . ....

                1. Aim of the test

                2. Circumstances in which required

                3. Test guideline

            2. 8.3.2. . . . . . . . . . ....

              1. Aim of the test

              2. Circumstances in which required

              3. Test conditions

              4. Test guideline

          7. 8.4. Effects on earthworms

            1. 8.4.1. . . . . . . . . . ....

              1. Aim of the test

              2. Circumstances in which required

              3. Test guideline

            2. 8.4.2. . . . . . . . . . ....

              1. Aim of the test

              2. Circumstances in which required

              3. Test conditions

          8. 8.5. Effects on soil non-target micro-organisms

            1. Aim of the test

            2. Circumstances in which required

            3. Test conditions

            4. Test guideline

          9. 8.6. Effects on other non-target organisms (flora and fauna) believed to...

          10. 8.7. Effects on biological methods for sewage treatment

        9. 9. Summary and evaluation of points 7 and 8

        10. 10. Proposals including justification for the proposals for the classification and...

        11. 11. A dossier as referred to in Annex III, part A,...

      3. PART B

        1. Introduction

        2. 1. Identity of the micro-organism

          1. 1.1. Applicant

          2. 1.2. Producer

          3. 1.3. Name and species description, strain characterisation

          4. 1.4. Specification of the material used for manufacturing of formulated products...

            1. 1.4.1. Content of the micro-organism

            2. 1.4.2. Identity and content of impurities, additives, contaminating micro-organisms

            3. 1.4.3. Analytical profile of batches

        3. 2. Biological properties of the micro-organism

          1. 2.1. History of the micro-organism and its uses. Natural occurrence and...

            1. 2.1.1. Historical background

            2. 2.1.2. Origin and natural occurrence

          2. 2.2. Information on target organism(s)

            1. 2.2.1. Description of the target organism(s)

            2. 2.2.2. Mode of action

          3. 2.3. Host specificity range and effects on species other than the...

          4. 2.4. Development stages/life cycle of the micro-organism

          5. 2.5. Infectiveness, dispersal and colonisation ability

          6. 2.6. Relationships to known plant or animal or human pathogens

          7. 2.7. Genetic stability and factors affecting it

          8. 2.8. Information on the production of metabolites (especially toxins)

          9. 2.9. Antibiotics and other anti-microbial agents

        4. 3. Further information on the micro-organism

          1. Introduction

          2. 3.1. Function

          3. 3.2. Field of use envisaged

          4. 3.3. Crops or products protected or treated

          5. 3.4. Method of production and quality control

          6. 3.5. Information on the occurrence or possible occurrence of the development...

          7. 3.6. Methods to prevent loss of virulence of seed stock of...

          8. 3.7. Recommended methods and precautions concerning handling, storage, transport or fire...

          9. 3.8. Procedures for destruction or decontamination

          10. 3.9. Measures in case of an accident

        5. 4. Analytical methods

          1. Introduction

          2. 4.1. Methods for the analysis of the micro-organism as manufactured

          3. 4.2. Methods to determine and quantify residues (viable or non-viable)

        6. 5. Effects on human health

          1. Introduction

          2. TIER I

            1. 5.1. Basic information

              1. 5.1.1. Medical data

              2. 5.1.2. Medical surveillance on manufacturing plant personnel

              3. 5.1.3. Sensitisation/allergenicity observations, if appropriate

              4. 5.1.4. Direct observation, e.g. clinical cases

            2. 5.2. Basic studies

              1. 5.2.1. Sensitisation

                1. Aim of the test

                2. Circumstances in which required

              2. 5.2.2. Acute toxicity, pathogenicity and infectiveness

                1. 5.2.2.1. Acute oral toxicity, pathogenicity and infectiveness

                  1. Circumstances in which required

                2. 5.2.2.2. Acute inhalation toxicity, pathogenicity and infectiveness

                  1. Circumstances in which required

                3. 5.2.2.3. Intraperitoneal/subcutaneous single dose

                  1. Circumstances in which required

              3. 5.2.3. Genotoxicity testing

                1. Circumstances in which required

                2. Aim of the test

                3. Test conditions

                4. 5.2.3.1. In vitro studies

                  1. Circumstances in which required

              4. 5.2.4. Cell culture study

              5. 5.2.5. Information on short-term toxicity and pathogenicity

                1. Aim of the test

                2. Circumstances in which required

                3. 5.2.5.1. Health effects after repeated inhalatory exposure

                  1. Circumstances in which required

              6. 5.2.6. Proposed treatment: first aid measures, medical treatment

          3. TIER II

            1. 5.3. Specific toxicity, pathogenicity and infectiveness studies

            2. 5.4. In vivo studies in somatic cells

              1. Circumstances in which required

            3. 5.5. Genotoxicity — In vivo studies in germ cells

              1. Aim of the test and test conditions

              2. Circumstances in which required

          4. 5.6. Summary of mammalian toxicity, pathogenicity and infectiveness and overall evaluation...

        7. 6. Residues in or on treated products, food and feed

          1. Introduction

          2. 6.1. Persistance and likelihood of multiplication in or on crops, feedingstuffs...

          3. 6.2. Further information required

            1. 6.2.1. Non-viable residues

            2. 6.2.2. Viable residues

          4. 6.3. Summary and evaluation of residue behaviour resulting from data submitted...

        8. 7. Fate and behaviour in the environment

          1. Introduction

          2. 7.1. Persistence and multiplication

            1. 7.1.1. Soil

            2. 7.1.2. Water

            3. 7.1.3. Air

          3. 7.2. Mobility

        9. 8. Effects on non-target organisms

          1. Introduction

          2. 8.1. Effects on birds

            1. Aim of the test

          3. 8.2. Effects on aquatic organisms

            1. Aim of the test

            2. 8.2.1. Effects on fish

              1. Aim of the test

            3. 8.2.2. Effects on freshwater invertebrates

              1. Aim of the test

            4. 8.2.3. Effects on algae growth

              1. Aim of the test

            5. 8.2.4. Effects on plants other than algae

              1. Aim of the test

          4. 8.3. Effects on bees

            1. Aim of the test

          5. 8.4. Effects on arthropods other than bees

            1. Aim of the test

          6. 8.5. Effects on earthworms

            1. Aim of the test

          7. 8.6. Effects on non-target soil micro-organisms

          8. 8.7. Additional studies

        10. 9. Summary and evaluation of environmental impact

    3. ANNEX III

      REQUIREMENTS FOR THE DOSSIER TO BE SUBMITTED FOR THE AUTHORIZATION OF A PLANT PROTECTION PRODUCT

      1. INTRODUCTION

        1. 1.1. . . . . . . . . . ....

        2. 1.2. . . . . . . . . . ....

        3. 1.3. . . . . . . . . . ....

        4. 1.4. . . . . . . . . . ....

        5. 1.5. . . . . . . . . . ....

        6. 1.6. . . . . . . . . . ....

        7. 2.1. . . . . . . . . . ....

        8. 2.2. . . . . . . . . . ....

        9. 2.3. . . . . . . . . . ....

        10. 2.4. . . . . . . . . . ....

        11. 2.5. . . . . . . . . . ....

        12. 2.6. . . . . . . . . . ....

        13. 3. . . . . . . . . . ....

        14. 4. . . . . . . . . . ....

      2. PART A Chemical preparations

        1. 1. Identity of the plant protection product

          1. 1.1. Applicant (name and address, etc.)

          2. 1.2. Manufacturer of the preparation and the active substance(s) (names and...

          3. 1.3. Trade name or proposed trade name, and manufacturer's development code...

          4. 1.4. Detailed quantitative and qualitative information on the composition of the...

            1. 1.4.1. . . . . . . . . . ....

            2. 1.4.2. . . . . . . . . . ....

            3. 1.4.3. . . . . . . . . . ....

            4. 1.4.4. . . . . . . . . . ....

          5. 1.5. Physical state and nature of the preparation (emulsifiable concentrate, wettable...

            1. 1.5.1. . . . . . . . . . ....

          6. 1.6. Function (herbicide, insecticide, etc.)

        2. 2. Physical, chemical and technical properties of the plant protection product...

          1. 2.1. Appearance (colour and odour)

          2. 2.2. Explosivity and oxidizing properties

            1. 2.2.1. . . . . . . . . . ....

            2. 2.2.2. . . . . . . . . . ....

          3. 2.3. Flash point and other indications of flammability or spontaneous ignition...

          4. 2.4. Acidity/alkalinity and if necessary pH value

            1. 2.4.1. . . . . . . . . . ....

            2. 2.4.2. . . . . . . . . . ....

          5. 2.5. Viscosity and surface tension

            1. 2.5.1. . . . . . . . . . ....

            2. 2.5.2. . . . . . . . . . ....

            3. 2.5.3. . . . . . . . . . ....

          6. 2.6. Relative density and bulk density

            1. 2.6.1. . . . . . . . . . ....

            2. 2.6.2. . . . . . . . . . ....

          7. 2.7. Storage — stability and shelf-life: Effects of light, temperature and...

            1. 2.7.1. . . . . . . . . . ....

            2. 2.7.2. . . . . . . . . . ....

            3. 2.7.3. . . . . . . . . . ....

          8. 2.8. Technical characteristics of the plant protection product

            1. 2.8.1. Wettability

            2. 2.8.2. Persistent foaming

            3. 2.8.3. Suspensibility and suspension stability

            4. 2.8.4. Dilution stability

            5. 2.8.5. Dry sieve test and wet sieve test

            6. 2.8.6. Particle size distribution (dustable and wettable powders, granules), content of...

              1. 2.8.6.1. . . . . . . . . . ....

              2. 2.8.6.2. . . . . . . . . . ....

              3. 2.8.6.3. . . . . . . . . . ....

            7. 2.8.7. Emulsifiability, Re-emulsifiability, emulsion stability

              1. 2.8.7.1. . . . . . . . . . ....

              2. 2.8.7.2. . . . . . . . . . ....

            8. 2.8.8. Flowability, pourability (rinsability) and dustability

              1. 2.8.8.1. . . . . . . . . . ....

              2. 2.8.8.2. . . . . . . . . . ....

              3. 2.8.8.3. . . . . . . . . . ....

          9. 2.9. Physical and chemical compatibility with other products including plant protection...

            1. 2.9.1. . . . . . . . . . ....

            2. 2.9.2. . . . . . . . . . ....

          10. 2.10. Adherence and distribution to seeds

          11. 2.11. Summary and evaluation of data presented under points 2.1. to...

        3. 3. Data on application

          1. 3.1. Field of use envisaged, e.g. field, protected crops, storage of...

          2. 3.2. Effects on harmful organisms, e.g. contact, inhalation or stomach poison,...

          3. 3.3. Details of intended use e.g. types of harmful organisms controlled...

          4. 3.4. Application rate

          5. 3.5. Concentration of active substance in material used (e.g. in the...

          6. 3.6. Method of application

          7. 3.7. Number and timing of applications and duration of protection

          8. 3.8. Necessary waiting periods or other precautions to avoid phytotoxic effects...

          9. 3.9. Proposed instructions for use

        4. 4. Further information on the plant protection product

          1. 4.1. Packaging (type, materials, size etc.), compatibility of the preparation with...

            1. 4.1.1. . . . . . . . . . ....

            2. 4.1.2. . . . . . . . . . ....

            3. 4.1.3. . . . . . . . . . ....

          2. 4.2. Procedures for cleaning application equipment

          3. 4.3. Re-entry periods, necessary waiting periods or other precautions to protect...

            1. 4.3.1. . . . . . . . . . ....

            2. 4.3.2. . . . . . . . . . ....

          4. 4.4. Recommended methods and precautions concerning: handling, storage, transport or fire...

          5. 4.5. Emergency measures in the case of an accident

          6. 4.6. Procedures for destruction or decontamination of the plant protection product...

            1. 4.6.1. Possibility of neutralization

            2. 4.6.2. Controlled incineration

            3. 4.6.3. Others

        5. 5. Analytical methods

          1. Introduction

          2. 5.1. Methods for the analysis of the preparation

            1. 5.1.1. . . . . . . . . . ....

            2. 5.1.2. . . . . . . . . . ....

            3. 5.1.3. . . . . . . . . . ....

              1. 5.1.3.1. . . . . . . . . . ....

              2. 5.1.3.2. . . . . . . . . . ....

              3. 5.1.3.3. . . . . . . . . . ....

              4. 5.1.3.4. . . . . . . . . . ....

          3. 5.2. Analytical methods for the determination of residues

        6. 6. Efficacy data

          1. General

          2. 6.1. Preliminary tests

          3. 6.2. Testing effectiveness

            1. Aim of the tests

            2. Test conditions

            3. Test guideline

          4. 6.3. Information on the occurrence or possible occurrence of the development...

          5. 6.4. Effects on the yield of treated plants or plant products...

            1. 6.4.1. Effects on the quality of plants or plant product

              1. Aim of the tests

              2. Circumstances in which required

            2. 6.4.2. Effects on transformation processes

              1. Aim of the tests

              2. Circumstances in which required

            3. 6.4.3. Effects on the yield of treated plants or plant products...

              1. Aim of the tests

              2. Circumstances in which required

          6. 6.5. Phytotoxicity to target plants (including different cultivars), or to target...

            1. Aim of the tests

            2. Circumstances in which required

            3. Test guideline

          7. 6.6. Observations on undesirable or unintended side-effects, e. g. on beneficial...

            1. 6.6.1. Impact on succeeding crops

              1. Aim of the information required

              2. Circumstances in which required

            2. 6.6.2. Impact on other plants, including adjacent crops

              1. Aim of the information required

              2. Circumstances in which required

            3. 6.6.3. Impact on treated plants or plant products to be used...

              1. Aim of the information required

              2. Circumstances in which required

              3. Test guideline

            4. 6.6.4. Effects on beneficial and other non-target organisms

          8. 6.7. Summary and evaluation of data presented under 6.1 to 6.6...

        7. 7. Toxicological studies

          1. 7.1. Acute toxicity

            1. 7.1.1. Oral

              1. Circumstances in which required

              2. Test guidelines

            2. 7.1.2. Percutaneous

              1. Circumstances in which required

              2. Test guideline

            3. 7.1.3. Inhalation

              1. Aim of the test

              2. Circumstances in which required

              3. Test guideline

            4. 7.1.4. Skin irritation

              1. Aim of the test

              2. Circumstances in which required

              3. Test guideline

            5. 7.1.5. Eye irritation

              1. Aim of the test

              2. Circumstances in which required

              3. Test guideline

            6. 7.1.6. Skin sensitization

              1. Aim of the test

              2. Circumstances in which required

              3. Test guideline

            7. 7.1.7. Supplementary studies for combinations of plant protection products

              1. Aim of the test

          2. 7.2. Data on exposure

            1. 7.2.1. Operator exposure

              1. 7.2.1.1. Estimation of operator exposure

                1. Aim of the estimation

                2. Circumstances in which required

                3. Estimation conditions

              2. 7.2.1.2. Measurement of operator exposure

                1. Aim of the test

                2. Circumstances in which required

                3. Test conditions

            2. 7.2.2. Bystander exposure

              1. Aim of the estimation

              2. Circumstances in which required

              3. Estimation conditions

            3. 7.2.3. Worker exposure

              1. 7.2.3.1. Estimation of worker exposure

                1. Aim of the estimation

                2. Circumstances in which required

                3. Estimation conditions

              2. 7.2.3.2. Measurement of worker exposure

                1. Aim of the test

                2. Circumstances in which required

                3. Test conditions

          3. 7.3. Dermal absorption

            1. Aim of the test

            2. Circumstances in which required

            3. Test conditions

            4. Test guideline

          4. 7.4. Available toxicological data relating to non-active substances

        8. 8. Residues in or on treated products, food and feed

          1. Introduction

          2. 8.1. Metabolism, distribution and expression of residue in plants or livestock...

            1. Aim of the tests

            2. Circumstances in which required

            3. Test conditions

          3. 8.2. Residue trials

            1. Aim of the tests

            2. Circumstances in which required

            3. Test conditions

          4. 8.3. Livestock feeding studies

            1. Aim of the tests

            2. Circumstances in which required

            3. Test conditions

          5. 8.4. Effects of industrial processing and/or household preparations

            1. Aim of the tests

            2. Circumstances in which required

            3. Test conditions

          6. 8.5. Residues in succeeding crops

            1. Aim of the test

            2. Circumstances in which required

            3. Test conditions

          7. 8.6. Proposed maximum residue levels (MRLs) and residue definition

          8. 8.7. Proposed pre-harvest intervals for envisaged uses, or withholding periods or...

          9. 8.8. Estimation of the potential and actual exposure through diet and...

          10. 8.9. Summary and evaluation of residue behaviour

        9. 9. Fate and behaviour in the environment

          1. Introduction

          2. 9.1 Fate and behaviour in soil

            1. 9.1.1. Rate of degradation in soil

              1. 9.1.1.1. . . . . . . . . . ....

              2. 9.1.1.2. . . . . . . . . . ....

            2. 9.1.2. Mobility in the soil

              1. 9.1.2.1. . . . . . . . . . ....

              2. 9.1.2.2. . . . . . . . . . ....

            3. 9.1.3. Estimation of expected concentrations in soil

          3. 9.2. Fate and behaviour in water

            1. 9.2.1. Estimation of concentrations in groundwater

            2. 9.2.2. Impact on water treatment procedures

            3. 9.2.3. Estimation of concentrations in surface water

          4. 9.3. Fate and behaviour in air

        10. 10. Ecotoxicological studies

          1. Introduction

          2. 10.1. Effects on birds

            1. 10.1.1. . . . . . . . . . ....

              1. Aim of the test

              2. Circumstances in which required

              3. Test conditions

            2. 10.1.2. . . . . . . . . . ....

              1. Aim of the test

              2. Circumstances in which required

              3. Test conditions

            3. 10.1.3. . . . . . . . . . ....

              1. Aim of the test

              2. Circumstances in which required

            4. 10.1.4. . . . . . . . . . ....

          3. 10.2. Effects on aquatic organisms

            1. 10.2.1. . . . . . . . . . ....

              1. Circumstances in which required

              2. Test conditions and test guidelines

            2. 10.2.2. . . . . . . . . . ....

              1. Aim of the test

              2. Circumstances in which required

              3. Test conditions

              4. Test guideline

            3. 10.2.3. . . . . . . . . . ....

              1. Aim of the test

              2. Circumstances in which required

              3. Test guideline

            4. 10.2.4. . . . . . . . . . ....

          4. 10.3. Effects on terrestrial vertebrates other than birds

            1. Aim of the test

            2. Circumstances in which required

            3. Test conditions

          5. 10.4. Effects on bees

            1. 10.4.1. . . . . . . . . . ....

              1. Aim of the test

              2. Circumstances in which required

              3. Test guideline

            2. 10.4.2. . . . . . . . . . ....

              1. Aim of the test

              2. Circumstances in which required

              3. Test conditions

            3. 10.4.3. . . . . . . . . . ....

              1. Aim of the test

              2. Circumstances in which required

              3. Test conditions

              4. Test guideline

            4. 10.4.4. . . . . . . . . . ....

              1. Aim of the test

              2. Circumstances in which required

              3. Test conditions

              4. Test guideline

            5. 10.4.5. . . . . . . . . . ....

              1. Aim of the test

              2. Circumstances in which required

              3. Test conditions

              4. Test guideline

          6. 10.5. Effects on arthropods other than bees

            1. 10.5.1. . . . . . . . . . ....

              1. Aim of the test

              2. Circumstances in which required

              3. Test conditions

              4. Test guideline

            2. 10.5.2. . . . . . . . . . ....

              1. Aim of the test

              2. Circumstances in which required

              3. Test conditions

              4. Test guideline

          7. 10.6. Effects on earthworms and other soil non-target macro-organisms, believed to...

            1. 10.6.1. . . . . . . . . . ....

              1. 10.6.1.1. . . . . . . . . . ....

                1. Aim of the test

                2. Circumstances in which required

                3. Test guideline

              2. 10.6.1.2. . . . . . . . . . ....

                1. Aim of the test

                2. Circumstances in which required

                3. Test conditions

              3. 10.6.1.3. . . . . . . . . . ....

                1. Aim of the test

                2. Circumstances in which required

                3. Test conditions

            2. 10.6.2. . . . . . . . . . ....

              1. Aim of the test

              2. Circumstances in which required

          8. 10.7. Effects on soil non-target micro-organisms

            1. 10.7.1. . . . . . . . . . ....

              1. Aim of the test

              2. Circumstances in which required

              3. Test guideline

            2. 10.7.2. . . . . . . . . . ....

              1. Aim of the test

              2. Circumstances in which required

          9. 10.8. Available data from biological primary screening in summary form

        11. 11. Summary and evaluation of points 9 and 10

        12. 12. Further information

          1. 12.1. . . . . . . . . . ....

          2. 12.2. . . . . . . . . . ....

          3. 12.3. . . . . . . . . . ....

          4. 12.4. . . . . . . . . . ....

          5. 12.5. . . . . . . . . . ....

      3. PART B

        1. Introduction

        2. 1. IDENTITY OF THE PLANT PROTECTION PRODUCT

          1. 1.1. Applicant

          2. 1.2. Manufacturer of the preparation and the micro-organism(s)

          3. 1.3. Trade name or proposed trade name, and manufacturer's development code...

          4. 1.4. Detailed quantitative and qualitative information on the composition of the...

          5. 1.5. Physical state and nature of the preparation

          6. 1.6. Function

        3. 2. PHYSICAL, CHEMICAL AND TECHNICAL PROPERTIES OF THE PLANT PROTECTION PRODUCT...

          1. 2.1. Appearance (colour and odour)

          2. 2.2. Storage stability and shelf-life

            1. 2.2.1. Effects of light, temperature and humidity on technical characteristics of...

            2. 2.2.2. Other factors affecting stability

          3. 2.3. Explosivity and oxidising properties

          4. 2.4. Flash point and other indications of flammability or spontaneous ignition...

          5. 2.5. Acidity, alkalinity and if necessary pH value

          6. 2.6. Viscosity and surface tension

          7. 2.7. Technical characteristics of the plant protection product

            1. 2.7.1. Wettability

            2. 2.7.2. Persistent foaming

            3. 2.7.3. Suspensibility and suspension stability

            4. 2.7.4. Dry sieve test and wet sieve test

            5. 2.7.5. Particle size distribution (dustable and wettable powders, granules), content of...

            6. 2.7.6. Emulsifiability, re-emulsifiability, emulsion stability

            7. 2.7.7. Flowability, pourability (rinsability) and dustability

          8. 2.8. Physical, chemical and biological compatibility with other products including plant...

            1. 2.8.1. Physical compatibility

            2. 2.8.2. Chemical compatibility

            3. 2.8.3. Biological compatibility

          9. 2.9. Adherence and distribution to seeds

          10. 2.10. Summary and evaluation of data presented under points 2.1 to...

        4. 3. DATA ON APPLICATION

          1. 3.1. Field of use envisaged

          2. 3.2. Mode of action

          3. 3.3. Details of intended use

          4. 3.4. Application rate

          5. 3.5. Content of micro-organism in material used (e.g. in the diluted...

          6. 3.6. Method of application

          7. 3.7. Number and timing of applications and duration of protection

          8. 3.8. Necessary waiting periods or other precautions to avoid phytopathogenic effects...

          9. 3.9. Proposed instructions for use

        5. 4. FURTHER INFORMATION ON THE PLANT PROTECTION PRODUCT

          1. 4.1. Packaging and compatibility of the preparation with proposed packaging materials...

          2. 4.2. Procedures for cleaning application equipment

          3. 4.3. Re-entry periods, necessary waiting periods or other precautions to protect...

          4. 4.4. Recommended methods and precautions concerning: handling, storage, transport or fire...

          5. 4.5. Measures in the case of an accident

          6. 4.6. Procedures for destruction or decontamination of the plant protection product...

            1. 4.6.1. Controlled incineration

            2. 4.6.2. Others

        6. 5. ANALYTICAL METHODS

          1. Introduction

          2. 5.1. Methods for the analysis of the preparation

          3. 5.2. Methods to determine and quantify residues

        7. 6. EFFICACY DATA

        8. 7. EFFECTS ON HUMAN HEALTH

          1. 7.1. Basic acute toxicity studies

            1. 7.1.1. Acute oral toxicity

              1. Circumstances in which required

              2. Test guideline

            2. 7.1.2. Acute inhalation toxicity

              1. Aim of the test

              2. Circumstances in which required

              3. Test guideline

            3. 7.1.3. Acute percutaneous toxicity

              1. Circumstances in which required

              2. Test guideline

          2. 7.2. Additional acute toxicity studies

            1. 7.2.1. Skin irritation

              1. Aim of the test

              2. Circumstances in which required

              3. Test guideline

            2. 7.2.2. Eye irritation

              1. Aim of the test

              2. Circumstances in which required

              3. Test guideline

            3. 7.2.3. Skin sensitisation

              1. Aim of the test

              2. Circumstances in which required

              3. Test guideline

          3. 7.3. Data on exposure

          4. 7.4. Available toxicological data relating to non-active substances

          5. 7.5. Supplementary studies for combinations of plant protection products

            1. Aim of the test

          6. 7.6. Summary and evaluation of health effects

        9. 8. RESIDUES IN OR ON TREATED PRODUCTS, FOOD AND FEED

        10. 9. FATE AND BEHAVIOUR IN THE ENVIRONMENT

        11. 10. EFFECTS ON NON-TARGET ORGANISMS

          1. Introduction

          2. 10.1. Effects on birds

          3. 10.2. Effects on aquatic organisms

          4. 10.3. Effects on bees

          5. 10.4. Effects on arthropods other than bees

          6. 10.5. Effects on earthworms

          7. 10.6. Effects on soil micro-organisms

          8. 10.7. Additional studies

        12. 11. SUMMARY AND EVALUATION OF ENVIRONMENTAL IMPACT

    4. ANNEX IV

      STANDARD PHRASES FOR SPECIAL RISKS FOR HUMANS OR THE ENVIRONMENT AS REFERRED TO IN ARTICLE 16

      1. INTRODUCTION

      2. 1. Standard phrases for special risks

        1. 1.1. Special risks related to humans (RSh)

          1. RSh 1

          2. RSh 2

          3. RSh 3

        2. 1.2. Special risks related to the environment (RSe)

      3. 2. Attribution criteria for standard phrases for special risks

        1. 2.1. Attribution criteria for standard phrases related to humans

          1. RSh 1 Toxic by eye contact.

          2. RSh 2 May cause photosensitisation.

          3. RSh 3 Contact with vapour causes burns to skin and eyes and...

        2. 2.2. Attribution criteria for standard phrases related to the environment

    5. ANNEX V

      STANDARD PHRASES FOR SAFETY PRECAUTIONS FOR THE PROTECTION OF HUMANS OR THE ENVIRONMENT AS REFERRED TO IN ARTICLE 16

      1. INTRODUCTION

      2. 1. General provisions

        1. SP 1

      3. 2. Specific safety precautions

        1. 2.1. Safety precautions for operators (SPo)

          1. General provisions

            1. 1. . . . . . . . . . ....

            2. 2. . . . . . . . . . ....

            3. 3. Member States may add specifications of engineering controls, such as:...

          2. Specific provisions

            1. SPo 1

            2. SPo 2

            3. SPo 3

            4. SPo 4

            5. SPo 5

        2. 2.2. Safety precautions related to the environment (SPe)

          1. SPe 1

          2. SPe 2

          3. SPe 3

          4. SPe 4

          5. SPe 5

          6. SPe 6

          7. SPe 7

          8. SPe 8

        3. 2.3. Safety precautions related to good agricultural practice

          1. SPa 1

        4. 2.4. Specific safety precautions for rodenticides (SPr)

          1. SPr 1

          2. SPr 2

          3. SPr 3

      4. 3. Attribution criteria for standard phrases for specific safety precautions

        1. 3.1. INTRODUCTION

        2. 3.2. Attribution criteria for standard phrases for safety precautions for operators...

          1. SPo 1

          2. SPo 2

          3. SPo 3

          4. SPo 4

          5. SPo 5

        3. 3.3. Attribution criteria for standard phrases for safety precautions for the...

          1. SPe 1

          2. SPe 2

          3. SPe 3

          4. SPe 4

          5. SPe 5

          6. SPe 6

          7. SPe 7

          8. SPe 8

        4. 3.4. Attribution criteria for standard phrases for safety precautions for good...

          1. SPa 1

        5. 3.5. Attribution criteria for standard phrases for specific safety precautions for...

          1. SPr 1

          2. SPr 2

          3. SPr 3

    6. ANNEX VI

      1. PART I UNIFORM PRINCIPLES FOR EVALUATION AND AUTHORISATION OF CHEMICAL PLANT PROTECTION PRODUCTS

        1. CONTENTS

          1. A. INTRODUCTION

          2. B. EVALUATION

            1. 1. General principles

            2. 2. Specific principles

              1. 2.1. . . . . . . . . . ....

              2. 2.2. . . . . . . . . . ....

              3. 2.3. . . . . . . . . . ....

              4. 2.4. . . . . . . . . . ....

                1. 2.4.1. . . . . . . . . . ....

                2. 2.4.2. . . . . . . . . . ....

              5. 2.5. . . . . . . . . . ....

                1. 2.5.1. . . . . . . . . . ....

                2. 2.5.2. . . . . . . . . . ....

              6. 2.6. . . . . . . . . . ....

              7. 2.7. . . . . . . . . . ....

          3. C. DECISION-MAKING

            1. 1. General principles

            2. 2. Specific principles

              1. 2.1. . . . . . . . . . ....

              2. 2.2. . . . . . . . . . ....

              3. 2.3. . . . . . . . . . ....

              4. 2.4. . . . . . . . . . ....

                1. 2.4.1. . . . . . . . . . ....

                2. 2.4.2. . . . . . . . . . ....

              5. 2.5. . . . . . . . . . ....

                1. 2.5.1. . . . . . . . . . ....

                2. 2.5.2. . . . . . . . . . ....

              6. 2.6. . . . . . . . . . ....

              7. 2.7. . . . . . . . . . ....

        2. A. INTRODUCTION

          1. 1. . . . . . . . . . ....

          2. 2. . . . . . . . . . ....

          3. 3. . . . . . . . . . ....

          4. 4. . . . . . . . . . ....

          5. 5. . . . . . . . . . ....

          6. 6. . . . . . . . . . ....

        3. B. EVALUATION

          1. 1. General principles

            1. 1. . . . . . . . . . ....

            2. 2. . . . . . . . . . ....

            3. 3. . . . . . . . . . ....

            4. 4. . . . . . . . . . ....

            5. 5. . . . . . . . . . ....

            6. 6. . . . . . . . . . ....

          2. 2. Specific priciples

            1. 2.1. Efficacy

              1. 2.1.1. . . . . . . . . . ....

              2. 2.1.2. . . . . . . . . . ....

              3. 2.1.3. . . . . . . . . . ....

              4. 2.1.4. . . . . . . . . . ....

              5. 2.1.5. . . . . . . . . . ....

            2. 2.2. Absence of unacceptable effects on plants or plant products

              1. 2.2.1. . . . . . . . . . ....

              2. 2.2.2. . . . . . . . . . ....

              3. 2.2.3. . . . . . . . . . ....

            3. 2.3. Impact on vertebrates to be controlled

            4. 2.4. Impact on human or animal health

              1. 2.4.1. arising from the plant protection product

                1. 2.4.1.1. . . . . . . . . . ....

                2. 2.4.1.2. . . . . . . . . . ....

                3. 2.4.1.3. . . . . . . . . . ....

                4. 2.4.1.4. . . . . . . . . . ....

              2. 2.4.2. Arising from residues

                1. 2.4.2.1. . . . . . . . . . ....

                2. 2.4.2.2. . . . . . . . . . ....

                3. 2.4.2.3. . . . . . . . . . ....

                4. 2.4.2.4. . . . . . . . . . ....

                5. 2.4.2.5. . . . . . . . . . ....

                6. 2.4.2.6. . . . . . . . . . ....

            5. 2.5. Influence on the environment

              1. 2.5.1. Fate and distribution in the environment

                1. 2.5.1.1. . . . . . . . . . ....

                2. 2.5.1.2. . . . . . . . . . ....

                3. 2.5.1.3. . . . . . . . . . ....

                4. 2.5.1.4. . . . . . . . . . ....

                5. 2.5.1.5. . . . . . . . . . ....

              2. 2.5.2. Impact on non-target species

                1. 2.5.2.1. . . . . . . . . . ....

                2. 2.5.2.2. . . . . . . . . . ....

                3. 2.5.2.3. . . . . . . . . . ....

                4. 2.5.2.4. . . . . . . . . . ....

                5. 2.5.2.5. . . . . . . . . . ....

                6. 2.5.2.6. . . . . . . . . . ....

            6. 2.6. Analytical methods

              1. 2.6.1. for formulation analysis:

              2. 2.6.2. for residue analysis:

            7. 2.7. Physical and chemical properties

              1. 2.7.1. . . . . . . . . . ....

              2. 2.7.2. . . . . . . . . . ....

              3. 2.7.3. . . . . . . . . . ....

        4. C. DECISION-MAKING

          1. 1. General principles

            1. 1. . . . . . . . . . ....

            2. 2. . . . . . . . . . ....

            3. 3. . . . . . . . . . ....

            4. 4. . . . . . . . . . ....

            5. 5. . . . . . . . . . ....

            6. 6. . . . . . . . . . ....

            7. 7. . . . . . . . . . ....

            8. 8. . . . . . . . . . ....

            9. 9. . . . . . . . . . ....

          2. 2. Specific principles

            1. 2.1. Efficacy

              1. 2.1.1. . . . . . . . . . ....

              2. 2.1.2. . . . . . . . . . ....

              3. 2.1.3. . . . . . . . . . ....

              4. 2.1.4. . . . . . . . . . ....

              5. 2.1.5. . . . . . . . . . ....

            2. 2.2. Absence of unacceptable effects on plants or plant products

              1. 2.2.1. . . . . . . . . . ....

              2. 2.2.2. . . . . . . . . . ....

              3. 2.2.3. . . . . . . . . . ....

              4. 2.2.4. . . . . . . . . . ....

              5. 2.2.5. . . . . . . . . . ....

              6. 2.2.6. . . . . . . . . . ....

              7. 2.2.7. . . . . . . . . . ....

              8. 2.2.8. . . . . . . . . . ....

            3. 2.3. Impact on vertebrates to be controlled

            4. 2.4. Impact on human or animal health

              1. 2.4.1. arising from the plant protection product

                1. 2.4.1.1. . . . . . . . . . ....

                2. 2.4.1.2. . . . . . . . . . ....

                3. 2.4.1.3. . . . . . . . . . ....

                4. 2.4.1.4. . . . . . . . . . ....

                5. 2.4.1.5. . . . . . . . . . ....

                6. 2.4.1.6. . . . . . . . . . ....

              2. 2.4.2. arising from residues

                1. 2.4.2.1. . . . . . . . . . ....

                2. 2.4.2.2. . . . . . . . . . ....

                3. 2.4.2.3. . . . . . . . . . ....

                4. 2.4.2.4. . . . . . . . . . ....

                5. 2.4.2.5. . . . . . . . . . ....

                6. 2.4.2.6. . . . . . . . . . ....

                7. 2.4.2.7. . . . . . . . . . ....

            5. 2.5. Influence on the environment

              1. 2.5.1. Fate and distribution in the environment

                1. 2.5.1.1. . . . . . . . . . ....

                2. 2.5.1.2. . . . . . . . . . ....

                3. 2.5.1.3. . . . . . . . . . ....

                4. 2.5.1.4. . . . . . . . . . ....

              2. 2.5.2. Impact on non-target species

                1. 2.5.2.1. . . . . . . . . . ....

                2. 2.5.2.2. . . . . . . . . . ....

                3. 2.5.2.3. . . . . . . . . . ....

                4. 2.5.2.4. . . . . . . . . . ....

                5. 2.5.2.5. . . . . . . . . . ....

                6. 2.5.2.6. . . . . . . . . . ....

            6. 2.6. Analytical methods

              1. 2.6.1. for formulation analysis:

              2. 2.6.2. for residue analysis:

            7. 2.7. Physical and chemical properties

              1. 2.7.1. . . . . . . . . . ....

              2. 2.7.2. . . . . . . . . . ....

              3. 2.7.3. . . . . . . . . . ....

      2. PART II UNIFORM PRINCIPLES FOR EVALUATION AND AUTHORISATION OF PLANT PROTECTION PRODUCTS CONTAINING MICRO-ORGANISMS

        1. A. INTRODUCTION

          1. 1. . . . . . . . . . ....

          2. 2. In evaluating applications for granting authorisations Member States shall:

          3. 3. . . . . . . . . . ....

          4. 4. Where the data and information provided are sufficient to permit...

          5. 5. During the process of evaluation and decision-making, the Member State...

          6. 6. . . . . . . . . . ....

          7. 7. . . . . . . . . . ....

          8. 8. . . . . . . . . . ....

          9. 9. . . . . . . . . . ....

          10. 10. Definitions and explanations of microbiological terms

        2. B. EVALUATION

          1. 1. General principles

            1. 1.1. Having regard to current scientific and technical knowledge, Member States...

            2. 1.2. The quality/methodology of tests, where there are no standardised test...

            3. 1.3. In interpreting the results of evaluations, Member States shall take...

            4. 1.4. . . . . . . . . . ....

            5. 1.5. . . . . . . . . . ....

            6. 1.6. . . . . . . . . . ....

            7. 1.7. Where specific principles in Section 2 provide for the use of...

            8. 1.8. . . . . . . . . . ....

          2. 2. Specific principles

            1. 2.1. Identity

              1. 2.1.1. Identity of the micro-organism in the plant protection product

              2. 2.1.2. Identity of the plant protection product

            2. 2.2. Biological, physical, chemical, and technical properties

              1. 2.2.1. Biological properties of the micro-organism in the plant protection product...

                1. 2.2.1.1. . . . . . . . . . ....

                2. 2.2.1.2. The ability of micro-organisms to adapt to the environment must...

                3. 2.2.1.3. The mode of action of the micro-organism should be evaluated...

                4. 2.2.1.4. In order to evaluate possible effects on non-target organisms, information...

                5. 2.2.1.5. . . . . . . . . . ....

              2. 2.2.2. Physical, chemical and technical properties of the plant protection product...

                1. 2.2.2.1. . . . . . . . . . ....

                2. 2.2.2.2. . . . . . . . . . ....

                3. 2.2.2.3. Member States shall evaluate the physical and chemical properties of...

                4. 2.2.2.4. . . . . . . . . . ....

            3. 2.3. Further information

              1. 2.3.1. Quality control of the production of the micro-organism in the...

              2. 2.3.2. Quality control of the plant protection product

            4. 2.4. Efficacy

              1. 2.4.1. . . . . . . . . . ....

              2. 2.4.2. . . . . . . . . . ....

              3. 2.4.3. Member States shall evaluate the efficacy data provided for in...

              4. 2.4.4. Member States shall evaluate the performance of the plant protection...

              5. 2.4.5. Member States shall evaluate the degree of adverse effects on...

              6. 2.4.6. Where the plant protection product label includes requirements for use...

              7. 2.4.7. . . . . . . . . . ....

              8. 2.4.8. Where the proposed use of a plant protection product is...

            5. 2.5. Identification/detection and quantification methods

              1. 2.5.1. Analytical methods for the plant protection product

                1. 2.5.1.1. Non-viable components

                2. 2.5.1.2. Viable components

              2. 2.5.2. Analytical methods for the determination of residues

                1. 2.5.2.1. Non-viable residues

                2. 2.5.2.2. Viable residues

            6. 2.6. Impact on human or animal health

              1. 2.6.1. Effects on human or animal health arising from the plant...

                1. 2.6.1.1. Member States shall evaluate operator exposure to the micro-organism, and/or...

                2. 2.6.1.2. Member States shall examine information relating to the nature and...

                3. 2.6.1.3. Member States shall examine the nature and characteristics of the...

                4. 2.6.1.4. Member States shall evaluate the possibility of exposure of other...

              2. 2.6.2. Effects on human or animal health arising from residues

                1. 2.6.2.1. Non-viable residues

                2. 2.6.2.2. Viable residues

            7. 2.7. Fate and behaviour in the environment

              1. 2.7.1. Member States shall evaluate the possibility of contamination of ground...

              2. 2.7.2. Member States shall evaluate the risk for the aquatic compartment...

              3. 2.7.3. . . . . . . . . . ....

              4. 2.7.4. Member States shall evaluate the possibility of exposure of organisms...

            8. 2.8. Effects on and exposure of non-target organisms

              1. 2.8.1. Member States shall evaluate the possibility of exposure of and...

                1. 2.8.1.1. A micro-organism may give rise to risks because of its...

                2. 2.8.1.2. A plant protection product may give rise to toxic effects...

              2. 2.8.2. Member States shall evaluate the possibility of exposure of and...

                1. 2.8.2.1. A micro-organism may give rise to risks because of its...

                2. 2.8.2.2. A plant protection product may give rise to toxic effects...

              3. 2.8.3. Member States shall evaluate the possibility of exposure of and...

                1. 2.8.3.1. A micro-organism may give rise to risks because of its...

                2. 2.8.3.2. A plant protection product may give rise to toxic effects...

              4. 2.8.4. Member States shall evaluate the possibility of exposure of and...

                1. 2.8.4.1. A micro-organism may give rise to risks because of its...

                2. 2.8.4.2. A plant protection product may give rise to toxic effects...

              5. 2.8.5. Member States shall evaluate the possibility of exposure of and...

                1. 2.8.5.1. A micro-organism may give rise to risks because of its...

                2. 2.8.5.2. A plant protection product may give rise to toxic effects...

              6. 2.8.6. Member States shall evaluate the possibility of exposure of and...

                1. 2.8.6.1. A micro-organism may give rise to risks because of its...

                2. 2.8.6.2. . . . . . . . . . ....

                3. 2.8.6.3. A plant protection product may give rise to toxic effects...

            9. 2.9. Conclusions and proposals

        3. C. DECISION-MAKING

          1. 1. General principles

            1. 1.1. . . . . . . . . . ....

            2. 1.2. . . . . . . . . . ....

            3. 1.3. . . . . . . . . . ....

            4. 1.4. . . . . . . . . . ....

            5. 1.5. . . . . . . . . . ....

            6. 1.6. Before issuing an authorisation, Member States shall ensure that the...

            7. 1.7. Before issuing authorisations, Member States shall:

            8. 1.8. No authorisation shall be granted unless all the requirements referred...

            9. 1.9. Where an authorisation has been granted according to the requirements...

            10. 1.10. . . . . . . . . . ....

            11. 1.11. . . . . . . . . . ....

            12. 1.12. . . . . . . . . . ....

            13. 1.13. . . . . . . . . . ....

            14. 1.14. . . . . . . . . . ....

          2. 2. Specific principles

            1. 2.1. Identity

            2. 2.2. Biological and technical properties

              1. 2.2.1. . . . . . . . . . ....

              2. 2.2.2. . . . . . . . . . ....

            3. 2.3. Further information

            4. 2.4. Efficacy

              1. 2.4.1. Performance

                1. 2.4.1.1. . . . . . . . . . ....

                2. 2.4.1.2. . . . . . . . . . ....

                3. 2.4.1.3. . . . . . . . . . ....

                4. 2.4.1.4. . . . . . . . . . ....

                5. 2.4.1.5. Where proposed label claims include requirements for use of the...

                6. 2.4.1.6. . . . . . . . . . ....

                7. 2.4.1.7. . . . . . . . . . ....

              2. 2.4.2. Absence of unacceptable effects on plants and plant products

                1. 2.4.2.1. . . . . . . . . . ....

                2. 2.4.2.2. . . . . . . . . . ....

                3. 2.4.2.3. . . . . . . . . . ....

                4. 2.4.2.4. . . . . . . . . . ....

                5. 2.4.2.5. . . . . . . . . . ....

                6. 2.4.2.6. . . . . . . . . . ....

                7. 2.4.2.7. . . . . . . . . . ....

                8. 2.4.2.8. . . . . . . . . . ....

            5. 2.5. Identification/detection and quantification methods

              1. 2.5.1. . . . . . . . . . ....

              2. 2.5.2. No authorisation shall be granted unless there are adequate methods...

            6. 2.6. Impact on human and animal health

              1. 2.6.1. Effects on human and animal health arising from the plant...

                1. 2.6.1.1. . . . . . . . . . ....

                2. 2.6.1.2. No authorisation shall be granted if the micro-organism and/or the...

                3. 2.6.1.3. All micro-organisms should be regarded as potential sensitisers, unless it...

                4. 2.6.1.4. . . . . . . . . . ....

                5. 2.6.1.5. . . . . . . . . . ....

                6. 2.6.1.6. . . . . . . . . . ....

                7. 2.6.1.7. . . . . . . . . . ....

                8. 2.6.1.8. . . . . . . . . . ....

                9. 2.6.1.9. . . . . . . . . . ....

              2. 2.6.2. Effects on human and animal health arising from residues

                1. 2.6.2.1. . . . . . . . . . ....

                2. 2.6.2.2. . . . . . . . . . ....

            7. 2.7. Fate and behaviour in the environment

              1. 2.7.1. . . . . . . . . . ....

              2. 2.7.2. . . . . . . . . . ....

              3. 2.7.3. No authorisation shall be granted if the contamination of groundwater...

              4. 2.7.4. No authorisation shall be granted if the contamination of surface...

              5. 2.7.5. . . . . . . . . . ....

              6. 2.7.6. . . . . . . . . . ....

              7. 2.7.7. . . . . . . . . . ....

            8. 2.8. Effects on non-target organisms

              1. 2.8.1. Where there is a possibility of birds and other non-target...

              2. 2.8.2. Where there is a possibility of aquatic organisms being exposed,...

              3. 2.8.3. Where there is a possibility of bees being exposed, no...

              4. 2.8.4. Where there is a possibility of arthropods other than bees...

              5. 2.8.5. . . . . . . . . . ....

              6. 2.8.6. . . . . . . . . . ....

Back to top

Options/Help

Print Options

You have chosen to open the Whole Directive

The Whole Directive you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

You have chosen to open Schedules only

The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the EU Official Journal
  • lists of changes made by and/or affecting this legislation item
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.

The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.

For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources