Council Regulation (EU) 2020/2231
of 18 December 2020
amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products
THE COUNCIL OF THE EUROPEAN UNION,
Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,
Having regard to the proposal from the European Commission,
Whereas:
In order to ensure a sufficient and uninterrupted supply of certain agricultural and industrial products which are not produced in the Union and thereby avoid any disturbances in the market for those products, Common Customs Tariff duties of the type referred to in Article 56(2)(c) of Regulation (EU) No 952/2013 of the European Parliament and of the Council1 (‘CCT duties’) on those products have been suspended by Council Regulation (EU) No 1387/20132. Those products can be imported into the Union at reduced or zero duty rates.
The Union production of certain products that are not listed in the Annex to Regulation (EU) No 1387/2013 is inadequate or non-existent. It is therefore in the interest of the Union to grant a complete suspension of the CCT duties on those products.
With a view to promoting integrated battery production in the Union in accordance with the communication from the Commission of 17 May 2018 entitled ‘Europe on the Move – Sustainable Mobility for Europe: safe, connected, and clean’, a partial suspension of the CCT duties should be granted in respect of certain products that are not listed in the Annex to Regulation (EU) No 1387/2013. In addition, only a partial suspension of the CCT duties should be granted in respect of certain products that are currently subject to complete suspensions. The date for the mandatory review of those suspensions should be 31 December 2021, in order for that review to take into account the evolution of the battery sector in the Union.
It is necessary to amend the product description, classification and end-use requirement for certain CCT duty suspensions listed in the Annex to Regulation (EU) No 1387/2013 in order to take into account technical product developments and economic trends in the market.
A review has been undertaken of certain CCT duty suspensions listed in the Annex to Regulation (EU) No 1387/2013. New dates should therefore be set for their next mandatory review.
It is no longer in the interest of the Union to maintain the suspension of CCT duties for certain products listed in the Annex to Regulation (EU) No 1387/2013. The suspensions for those products should therefore be deleted. Moreover, according to the communication from the Commission of 13 December 2011 concerning autonomous tariff suspensions and quotas, for practical reasons requests for tariff suspensions or quotas where the amount of uncollected customs duty is estimated to be less than EUR 15 000 per year cannot be taken into consideration. The suspensions for products which do not reach that threshold, as indicated by the mandatory review, should therefore be deleted from the Annex to Regulation (EU) No 1387/2013.
Regulation (EU) No 1387/2013 should therefore be amended accordingly.
In order to avoid any interruption in the application of the autonomous tariff suspension scheme and to comply with the guidelines set out in the communication from the Commission of 13 December 2011 concerning autonomous tariff suspensions and quotas, the changes provided for in this Regulation regarding the tariff suspensions for the products concerned should apply from 1 January 2021. This Regulation should therefore enter into force as a matter of urgency,
HAS ADOPTED THIS REGULATION:
Article 1
The Annex to Regulation (EU) No 1387/2013 is amended in accordance with the Annex to this Regulation.
Article 2
This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.
It shall apply from 1 January 2021.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 18 December 2020.
For the Council
The President
M. Roth
ANNEX
The Annex to Regulation (EU) No 1387/2013 is amended as follows:
- (1)
the entries with the following serial numbers are deleted:
0.3338, 0.3662, 0.4675, 0.4795, 0.4856, 0.4891, 0.4902, 0.4903, 0.4905, 0.4908, 0.4911, 0.4920, 0.4926, 0.4935, 0.4939, 0.4943, 0.4973, 0.4995, 0.5012, 0.5022, 0.5039, 0.5043, 0.5052, 0.5053, 0.5067, 0.5092, 0.5103, 0.5123, 0.5125, 0.5126, 0.5311, 0.5498, 0.5953, 0.6036, 0.6068, 0.6087, 0.6450, 0.6527, 0.6591, 0.6592, 0.6595, 0.6596, 0.6597, 0.6606, 0.6607, 0.6608, 0.6610, 0.6615, 0.6616, 0.6619, 0.6626, 0.6636, 0.6639, 0.6651, 0.6653, 0.6665, 0.6676, 0.6694, 0.6697, 0.6704, 0.6705, 0.6715, 0.6724, 0.6727, 0.6731, 0.6733, 0.6735, 0.6743, 0.6744, 0.6755, 0.6756, 0.6758, 0.6760, 0.6768, 0.6775, 0.6776, 0.6778, 0.6780, 0.6785, 0.6786, 0.6787, 0.6788, 0.6795, 0.6798, 0.6803, 0.6807, 0.6811, 0.6832, 0.6833, 0.6834, 0.6838, 0.6841, 0.6883, 0.6890, 0.6895, 0.6900, 0.6902, 0.6909, 0.6914, 0.6916, 0.6918, 0.6928, 0.6941, 0.6942, 0.6943, 0.6944, 0.6953, 0.6954, 0.7040, 0.7222, 0.7293, 0.7558, 0.7560, 0.7697, 0.7715 and 0.7855;
- (2)
the following entries replace those entries that have the same serial numbers:
Serial Number
CN code
TARIC
Description
Rate of autonomous duty
Supplementary Unit
Date foreseen for mandatory review
‘0.6748
ex 0709 59 10
10
Fresh or chilled chanterelles for treatment other than simple repacking for retail sale34
0 %
-
31.12.2025
0.2864
ex 1511 90 19
ex 1511 90 91
ex 1513 11 10
ex 1513 19 30
ex 1513 21 10
ex 1513 29 30
20
20
20
20
20
20
Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of:
industrial monocarboxylic fatty acids of subheading 3823 19 10,
methyl esters of fatty acids of heading 2915 or 2916,
fatty alcohols of subheadings 2905 17, 2905 19 and 3823 70 used for the manufacture of cosmetics, washing products or pharmaceutical products,
fatty alcohols of subheading 2905 16, pure or mixed, used for the manufacture of cosmetics, washing products or pharmaceutical products,
stearic acid of subheading 3823 11 00,
goods of heading 3401, or
fatty acids with high purity of heading 29154
0 %
-
31.12.2021
0.6789
ex 1512 19 10
10
Refined safflower oil (CAS RN 8001-23-8) for use in the manufacture of
conjugated linoleic acid of heading 3823 or
ethyl- or methyl esters of linoleic acid of heading 29164
0 %
-
31.12.2022
0.5004
ex 2008 99 48
94
Mango puree:
not from concentrate,
of the genus Mangifera,
of a Brix value of 14 or more, but not more than 20,
used in the manufacture of products of drink industry4
6 %
-
31.12.2022
0.4709
ex 2008 99 49
ex 2008 99 99
30
40
Seedless boysenberry puree not containing added spirit, whether or not containing added sugar
0 %
-
31.12.2025
0.6723
ex 2008 99 91
20
Chinese water chestnuts (Eleocharis dulcis or Eleocharis tuberosa) peeled, washed, blanched, chilled and individually quick-frozen for use in the manufacture of products of food industry for treatment other than simple repacking34
0 %5
-
31.12.2025
0.4992
ex 2009 41 92
ex 2009 41 99
20
70
Pineapple juice:
not from concentrate,
of the genus Ananas,
of a Brix value of 11 or more but not more than 16,
used in the manufacture of products of drink industry4
8 %
-
31.12.2025
0.7393
ex 2712 90 99
10
Blend of 1-alkenes containing by weight 90 % or more 1-alkenes of a chain length of 24 carbon atoms or more but not more than 1 % 1-alkenes of a chain length of more than 70 carbon atoms
0 %
-
31.12.2022
0.6658
ex 2805 12 00
10
Calcium with a purity of 98 % or more by weight, in powder or wire form (CAS RN 7440-70-2)
0 %
-
31.12.2025
0.4979
2805 30 20
2805 30 30
2805 30 40
Rare-earth metals, scandium and yttrium, of a purity by weight of 95 % or more
0 %
-
31.12.2025
0.6836
ex 2811 22 00
15
Amorphous silicon dioxide (CAS RN 60676-86-0)
in the form of powder
of a purity by weight of 99,0 % or more
with a median grain size of 0,7 μm or more, but not more than 2,1 μm
where 70 % of the particles have a diameter of not more than 3 μm
0 %
-
31.12.2022
0.5110
ex 2818 10 91
20
Sintered corundum with a micro crystalline structure, consisting of aluminium oxide (CAS RN 1344-28-1), magnesium aluminate (CAS RN 12068-51-8) and the rare earth aluminates of yttrium, lanthanum, and neodymium, with a content by weight (calculated as oxides) of:
94 % or more, but less than 98,5 % of aluminium oxide,
2 % (± 1,5 %) of magnesium oxide,
1 % (± 0,6 %) of yttrium oxide,
and
either 2 % (± 1,2 %) of lanthanum oxide, or
2 % (± 1,2 %) of lanthanum oxide and neodymium oxide,
with less than 50 % of the total weight having a particle size of more than 10 mm
0 %
-
31.12.2025
0.6837
ex 2818 30 00
20
Aluminium hydroxide (CAS RN 21645-51-2)
in the form of powder,
with a purity by weight of 99,5 % or more,
with a decomposition point of 263°C or more,
with a particle size of 4 μm (± 1 μm),
with a Total-Na2O-content by weight of not more than 0,06 %
0 %
-
31.12.2025
0.7897
ex 2825 20 00
10
Lithium hydroxide monohydrate (CAS RN 1310-66-3)
2.6 %
-
31.12.2021
0.6819
ex 2825 50 00
30
Copper (II) oxide (CAS RN 1317-38-0), with a particle size of not more than 100 nm
0 %
-
31.12.2025
0.5055
ex 2826 19 90
10
Tungsten hexafluoride (CAS RN 7783-82-6) with a purity by weight of 99,9 % or more
0 %
-
31.12.2025
0.5090
ex 2833 29 80
30
Zirconium sulphate (CAS RN 14644-61-2)
0 %
-
31.12.2021
0.6632
ex 2840 20 90
10
Zinc borate (CAS RN 12767-90-7)
0 %
-
31.12.2025
0.7288
ex 2841 50 00
11
Potassium dichromate (CAS RN 7778-50-9) with a purity by weight of 99 % or more
2 %
-
31.12.2021
0.4222
ex 2841 90 85
10
Lithium cobalt(III) oxide (CAS RN 12190-79-3) with a cobalt content of at least 59 %
2.7 %
-
31.12.2021
0.3419
ex 2850 00 20
80
Arsine (CAS RN 7784-42-1) with a purity by volume of 99,999 % or more
0 %
-
31.12.2024
0.6633
2903 39 21
Difluoromethane (CAS RN 75-10-5)
0 %
-
31.12.2025
0.2583
ex 2903 89 80
45
1,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo [12.2.1.16,9.02,13.05,10]octadeca-7,15-diene (CAS RN 13560-89-9) with a purity by weight of 99 % or more
2 %
-
31.12.2021
0.6611
ex 2903 99 80
15
4-Bromo-2-chloro-1-fluorobenzene (CAS RN 60811-21-4)
0 %
-
31.12.2025
0.3409
ex 2904 20 00
10
Nitromethane (CAS RN 75-52-5)
0 %
-
31.12.2025
0.3391
ex 2904 20 00
20
Nitroethane (CAS RN 79-24-3)
0 %
-
31.12.2022
0.3408
ex 2904 20 00
30
1-Nitropropane (CAS RN 108-03-2)
0 %
-
31.12.2025
0.6612
ex 2904 99 00
25
Difluoromethanesulphonyl chloride (CAS RN 1512-30-7)
0 %
-
31.12.2025
0.6613
ex 2904 99 00
35
1-Fluoro-4-nitrobenzene (CAS RN 350-46-9)
0 %
-
31.12.2025
0.4934
ex 2905 39 95
10
Propane-1,3-diol (CAS RN 504-63-2)
0 %
-
31.12.2025
0.6757
ex 2906 29 00
40
2-Bromo-5-iodo-benzenemethanol (CAS RN 946525-30-0)
0 %
-
31.12.2022
0.6782
ex 2908 19 00
40
3,4,5-Trifluorophenol (CAS RN 99627-05-1)
0 %
-
31.12.2025
0.6915
ex 2908 19 00
50
4-Fluorophenol (CAS RN 371-41-5)
0 %
-
31.12.2025
0.6649
ex 2909 30 38
30
1,1'-(1-Methylethylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)]-benzene (CAS RN 97416-84-7)
0 %
-
31.12.2025
0.5117
ex 2909 30 90
30
3,4,5-Trimethoxytoluene (CAS RN 6443-69-2)
0 %
-
31.12.2025
0.6614
ex 2909 30 90
40
1-Chloro-2,5-dimethoxybenzene (CAS RN 2100-42-7)
0 %
-
31.12.2025
0.6783
ex 2909 30 90
50
1-Ethoxy-2,3-difluorobenzene (CAS RN 121219-07-6)
0 %
-
31.12.2025
0.6784
ex 2909 30 90
60
1-Butoxy-2,3-difluorobenzene (CAS RN 136239-66-2)
0 %
-
31.12.2025
0.6927
ex 2909 49 80
10
1-Propoxypropan-2-ol (CAS RN 1569-01-3)
0 %
-
31.12.2021
0.6660
ex 2910 90 00
50
2,3-Epoxypropyl phenyl ether (CAS RN 122-60-1)
0 %
-
31.12.2025
0.5135
ex 2912 49 00
30
Salicylaldehyde (CAS RN 90-02-8)
0 %
-
31.12.2025
0.6678
ex 2912 49 00
40
3-Hydroxy-p-anisaldehyde (CAS RN 621-59-0)
0 %
-
31.12.2025
0.4933
ex 2914 29 00
30
(R)-p-Mentha-1(6),8-dien-2-one (CAS RN 6485-40-1)
0 %
-
31.12.2025
0.4932
ex 2914 50 00
20
3'-Hydroxyacetophenone (CAS RN 121-71-1)
0 %
-
31.12.2025
0.6762
ex 2914 50 00
75
7-Hydroxy-3,4-dihydro-1(2H)-naphthalenone (CAS RN 22009-38-7)
0 %
-
31.12.2022
0.4948
ex 2914 79 00
60
4'-tert-Butyl-2',6'-dimethyl-3',5'-dinitroacetophenone (CAS RN 81-14-1)
0 %
-
31.12.2021
0.5119
ex 2915 39 00
60
Dodec-8-enyl acetate (CAS RN 28079-04-1)
0 %
-
31.12.2025
0.5121
ex 2915 39 00
65
Dodeca-7,9-dienyl acetate (CAS RN 54364-62-4)
0 %
-
31.12.2025
0.5120
ex 2915 39 00
70
Dodec-9-enyl acetate (CAS RN 16974-11-1)
0 %
-
31.12.2025
0.7541
ex 2915 90 30
10
Methyl laurate (CAS RN 111-82-0)
0 %
-
31.12.2025
0.4954
ex 2915 90 70
60
Ethyl-6,8-dichlorooctanoate (CAS RN 1070-64-0)
0 %
-
31.12.2025
0.3466
ex 2916 13 00
30
Zinc monomethacrylate powder (CAS RN 63451-47-8) whether or not containing not more than 17 % by weight of manufacturing impurities
0 %
-
31.12.2025
0.4931
ex 2916 20 00
60
3-Cyclohexylpropionic acid (CAS RN 701-97-3)
0 %
-
31.12.2025
0.4930
ex 2916 39 90
30
2,4,6-Trimethylbenzoyl chloride (CAS RN 938-18-1)
0 %
-
31.12.2025
0.6794
ex 2916 39 90
41
4-Bromo-2,6-difluorobenzoyl chloride (CAS RN 497181-19-8)
0 %
-
31.12.2025
0.6661
ex 2916 39 90
53
5-Iodo-2-methylbenzoic acid (CAS RN 54811-38-0)
0 %
-
31.12.2025
0.4918
ex 2917 19 80
50
Tetradecanedioic acid (CAS RN 821-38-5)
0 %
-
31.12.2025
0.4945
ex 2917 39 95
20
Dibutyl-1,4-benzenedicarboxylate (CAS RN 1962-75-0)
0 %
-
31.12.2025
0.6796
ex 2917 39 95
25
Naphthalene-1,8-dicarboxylic anhydride (CAS RN 81-84-5)
0 %
-
31.12.2025
0.3640
ex 2917 39 95
30
Benzene-1,2:4,5-tetracarboxylic dianhydride (CAS RN 89-32-7)
0 %
-
31.12.2025
0.6800
ex 2917 39 95
35
1-Methyl-2-nitroterephthalate (CAS RN 35092-89-8)
0 %
-
31.12.2025
0.6814
ex 2918 99 90
13
3-Methoxy-2-methylbenzoyl chloride (CAS RN 24487-91-0)
0 %
-
31.12.2025
0.6901
ex 2918 99 90
18
Ethyl 2-hydroxy-2-(4-phenoxyphenyl)propanoate (CAS RN 132584-17-9)
0 %
-
31.12.2025
0.6747
ex 2918 99 90
85
Trinexapac-Ethyl (ISO) (CAS RN 95266-40-3) with a purity by weight of 96 % or more
0 %
-
31.12.2025
0.5038
ex 2920 29 00
20
Tris(methylphenyl)phosphite (CAS RN 25586-42-9)
0 %
-
31.12.2025
0.5045
ex 2920 29 00
40
Bis(2,4-dicumylphenyl)pentaerythritol diphosphite (CAS RN 154862-43-8)
0 %
-
31.12.2025
0.7559
ex 2920 90 10
15
Ethyl methyl carbonate (CAS RN 623-53-0)
3.2 %
-
31.12.2021
0.6598
ex 2920 90 70
80
Bis(pinacolato)diboron (CAS RN 73183-34-3)
0 %
-
31.12.2025
0.4917
ex 2921 29 00
40
Decamethylenediamine (CAS RN 646-25-3)
0 %
-
31.12.2025
0.4862
ex 2921 30 99
30
1,3-Cyclohexanedimethanamine (CAS RN 2579-20-6)
0 %
-
31.12.2021
0.5124
ex 2921 43 00
60
3-Aminobenzotrifluoride (CAS RN 98-16-8)
0 %
-
31.12.2025
0.6825
ex 2921 49 00
60
2,6-Diisopropylaniline (CAS RN 24544-04-5)
0 %
-
31.12.2025
0.6947
ex 2922 19 00
35
2-[2-(Dimethylamino)ethoxy] ethanol (CAS RN 1704-62-7)
0 %
-
31.12.2025
0.6624
ex 2922 29 00
30
1,2-Bis(2-aminophenoxy)ethane (CAS RN 52411-34-4)
0 %
-
31.12.2025
0.6634
ex 2922 29 00
63
Aclonifen (ISO) (CAS RN 74070-46-5) with a purity by weight of 97 % or more
0 %
-
31.12.2025
0.4956
ex 2922 29 00
75
4-(2-Aminoethyl)phenol (CAS RN 51-67-2)
0 %
-
31.12.2025
0.4914
ex 2922 39 00
20
2-Amino-5-chlorobenzophenone (CAS RN 719-59-5)
0 %
-
31.12.2025
0.6761
ex 2922 39 00
35
5-Chloro-2-(methylamino)benzophenone (CAS RN 1022-13-5)
0 %
-
31.12.2025
0.7853
ex 2922 49 85
13
Benzyl glycinate—4-methylbenzene-1-sulfonic acid (1/1) (CAS RN 1738-76-7) with a purity by weight of 93 % or more
0 %
-
31.12.2024
0.5037
ex 2922 49 85
17
Glycine (CAS RN 56-40-6) with a purity by weight of 95 % or more, whether or not with not more than 5 % addition of anti-caking agent silicon dioxide (CAS RN 112926-00-8)
0 %
-
31.12.2025
0.6948
ex 2922 49 85
30
Aqueous solution containing 40 % by weight or more of sodium methylaminoacetate (CAS RN 4316-73-8)
0 %
-
31.12.2021
0.6650
ex 2922 49 85
65
Diethyl aminomalonate hydrochloride (CAS RN 13433-00-6)
0 %
-
31.12.2025
0.5063
ex 2923 90 00
75
Tetraethylammonium hydroxide, in the form of an aqueous solution containing:
35 % (± 0,5 %) by weight of tetraethylammonium hydroxide,
not more than 1 000 mg/kg of chloride,
not more than 2 mg/kg of iron, and
not more than 10 mg/kg of potassium
0 %
-
31.12.2025
0.3689
ex 2924 19 00
23
Acrylamide (CAS RN 79-06-1) with a purity by weight of 97 % or more
2 %
-
31.12.2021
0.5066
ex 2924 29 70
40
N,N'-1,4-Phenylenebis[3-oxobutyramide], (CAS RN 24731-73-5)
0 %
-
31.12.2025
0.5127
ex 2924 29 70
45
Propoxur (ISO) (CAS RN 114-26-1)
0 %
-
31.12.2025
0.5069
ex 2924 29 70
55
N,N'-(2,5-Dimethyl-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 24304-50-5)
0 %
-
31.12.2025
0.6767
ex 2924 29 70
62
2-Chlorobenzamide (CAS RN 609-66-5)
0 %
-
31.12.2025
0.6766
ex 2924 29 70
64
N-(3',4'-dichloro-5-fluoro[1,1'-biphenyl]-2-yl)acetamide (CAS RN 877179-03-8)
0 %
-
31.12.2025
0.6934
ex 2926 90 70
17
Cypermethrin (ISO) with its stereoisomers (CAS RN 52315-07-8) with a purity by weight of 90 % or more
0 %
-
31.12.2025
0.6259
ex 2926 90 70
26
Cyfluthrin (ISO) (CAS RN 68359-37-5) with a purity by weight of 95,5 % or more for the use in the manufacture of biocidal products4
0 %
-
31.12.2024
0.6871
ex 2928 00 90
23
Metobromuron (ISO) (CAS RN 3060-89-7) with a purity by weight of 98 % or more
0 %
-
31.12.2025
0.4929
ex 2928 00 90
25
Acetaldehyde oxime (CAS RN 107-29-9) in an aqueous solution
0 %
-
31.12.2025
0.6635
ex 2928 00 90
50
Aqueous solution of 2,2'-(hydroxyimino) bisethanesulphonic acid disodium salt (CAS RN 133986-51-3) with a content by weight of more than 33,5 % but not more than 36,5 %
0 %
-
31.12.2025
0.5035
ex 2930 90 98
10
2,3-Bis((2-mercaptoethyl)thio)-1-propanethiol (CAS RN 131538-00-6)
0 %
-
31.12.2022
0.6769
ex 2930 90 98
22
Tembotrione (ISO) (CAS RN 335104-84-2) with a purity by weight of 94,5 % or more
0 %
-
31.12.2025
0.6873
ex 2930 90 98
26
Folpet (ISO)(CAS RN 133-07-3) with a purity by weight of 97,5 % or more
0 %
-
31.12.2025
0.6617
ex 2930 90 98
53
Bis(4-chlorophenyl) sulphone (CAS RN 80-07-9)
0 %
-
31.12.2025
0.5114
ex 2930 90 98
55
Thiourea (CAS RN 62-56-6)
0 %
-
31.12.2025
0.6917
ex 2931 90 00
63
Chloroethenyldimethylsilane (CAS RN 1719-58-0)
0 %
-
31.12.2021
0.6946
ex 2931 90 00
65
Bis(4-tert-butylphenyl)iodonium hexafluorophosphate (CAS RN 61358-25-6)
0 %
-
31.12.2021
0.6620
ex 2932 20 90
65
Sodium 4-(methoxycarbonyl)-5-oxo-2,5-dihydrofuran-3-olate (CAS RN 1134960-41-0)
0 %
-
31.12.2025
0.7639
ex 2932 99 00
27
(2-Butyl-3-benzofuranyl)(4-hydroxy-3,5-diiodophenyl)methanone (CAS RN 1951-26-4) with a purity by weight of 99 % or more
0 %
-
31.12.2023
0.4907
ex 2932 99 00
50
7-Methyl-3,4-dihydro-2H-1,5-benzodioxepin-3-one (CAS RN 28940-11-6)
0 %
-
31.12.2021
0.6771
ex 2932 99 00
65
4,4-Dimethyl-3,5,8-trioxabicyclo[5,1,0]octane (CAS RN 57280-22-5)
0 %
-
31.12.2025
0.7811
ex 2933 19 90
33
Fipronil (ISO) (CAS RN 120068-37-3) with a purity by weight of 95 % or more for the use in the manufacture of veterinary medicine4
0 %
-
31.12.2024
0.6835
ex 2933 21 00
55
1-Aminohydantoin hydrochloride (CAS RN 2827-56-7)
0 %
-
31.12.2025
0.5115
ex 2933 21 00
80
5,5-Dimethylhydantoin (CAS RN 77-71-4)
0 %
-
31.12.2025
0.6812
ex 2933 39 99
14
N,4-Dimethyl-1-(phenylmethyl)- 3-piperidinamine hydrochloride (1:2) (CAS RN 1228879-37-5)
0 %
-
31.12.2022
0.4842
ex 2933 39 99
20
Copper pyrithione powder (CAS RN 14915-37-8)
0 %
-
31.12.2021
0.6813
ex 2933 39 99
26
2-[4-(Hydrazinylmethyl)phenyl]-pyridine dihydrochloride (CAS RN 1802485-62-6)
0 %
-
31.12.2022
0.5129
ex 2933 39 99
85
2-Chloro-5-chloromethylpyridine (CAS RN 70258-18-3)
0 %
-
31.12.2025
0.6773
ex 2933 49 10
50
1-Cyclopropyl-6,7,8-trifluoro-1,4-dihydro-4-oxo-3-quinolinecarboxylic acid (CAS RN 94695-52-0)
0 %
-
31.12.2025
0.4927
ex 2933 49 90
30
Quinoline (CAS RN 91-22-5)
0 %
-
31.12.2025
0.6763
ex 2933 59 95
21
N-(2-oxo-1,2-dihydropyrimidin-4-yl)benzamide (CAS RN 26661-13-2)
0 %
-
31.12.2025
0.6677
ex 2933 59 95
47
6-Methyl-2-oxoperhydropyrimidin-4-ylurea (CAS RN 1129-42-6) with a purity of 94 % or more
0 %
-
31.12.2025
0.6774
ex 2933 69 80
13
Metribuzin (ISO) (CAS RN 21087-64-9) with a purity by weight of 93 % or more
0 %
-
31.12.2025
0.6621
ex 2933 69 80
15
2-Chloro-4,6-dimethoxy-1,3,5-triazine (CAS RN 3140-73-6)
0 %
-
31.12.2025
0.6951
ex 2933 69 80
17
Benzoguanamine (CAS RN 91-76-9)
0 %
-
31.12.2021
0.5131
ex 2933 69 80
55
Terbutryn (ISO) (CAS RN 886-50-0)
0 %
-
31.12.2025
0.4957
ex 2933 69 80
60
Cyanuric acid (CAS RN 108-80-5)
0 %
-
31.12.2025
0.4985
ex 2933 79 00
70
(S)-N-[(Diethylamino)methyl]-alpha-ethyl-2-oxo-1-pyrrolidineacetamide L-(+)-tartrate, (CAS RN 754186-36-2)
0 %
-
31.12.2025
0.6872
ex 2933 99 80
16
Pyridate (ISO)(CAS RN 55512-33-9) with a purity by weight of 90 % or more
0 %
-
31.12.2025
0.6829
ex 2933 99 80
21
1-(Bis(dimethylamino)methylene)-1H-[1,2,3]triazolo[4,5-b]pyridinium 3-oxide hexafluorophosphate(V) (CAS RN 148893-10-1)
0 %
-
31.12.2025
0.6599
ex 2933 99 80
54
3-(Salicyloylamino)-1,2,4-triazole (CAS RN 36411-52-6)
0 %
-
31.12.2025
0.6933
ex 2933 99 80
87
Carfentrazone-ethyl (ISOM) (CAS RN 128639-02-1) with a purity by weight of 90 % or more
0 %
-
31.12.2025
0.4955
ex 2934 20 80
60
Benzothiazol-2-yl-(Z)-2-trityloxyimino-2-(2-aminothiazole-4-yl)-thioacetate (CAS RN 143183-03-3)
0 %
-
31.12.2022
0.4910
ex 2934 20 80
70
N,N-Bis(1,3-benzothiazol-2-ylsulphanyl)-2-methylpropan-2-amine (CAS RN 3741-80-8)
0 %
-
31.12.2025
0.4942
ex 2934 99 90
25
2,4-Diethyl-9H-thioxanthen-9-one (CAS RN 82799-44-8)
0 %
-
31.12.2025
0.6824
ex 2934 99 90
39
4-(Oxiran-2-ylmethoxy)-9H-carbazole (CAS RN 51997-51-4)
0 %
-
31.12.2025
0.6823
ex 2934 99 90
41
11-[4-(2-Chloro-ethyl)-1-piperazinyl]dibenzo(b,f)(1,4)thiazepine (CAS RN 352232-17-8)
0 %
-
31.12.2025
0.6893
ex 2934 99 90
44
Propiconazole (ISO) (CAS RN 60207-90-1) with a purity by weight of 92 % or more
0 %
-
31.12.2025
0.5133
ex 2934 99 90
86
Dithianon (ISO) (CAS RN 3347-22-6)
0 %
-
31.12.2025
0.5136
ex 2934 99 90
87
2,2'-(1,4-Phenylene)bis(4H-3,1-benzoxazin-4-one) (CAS RN 18600-59-4)
0 %
-
31.12.2025
0.5036
ex 2935 90 90
42
Penoxsulam (ISO) (CAS RN 219714-96-2)
0 %
-
31.12.2025
0.6777
ex 2935 90 90
54
Propoxycarbazone-sodium (ISO) (CAS RN 181274-15-7) with a purity by weight of 95 % or more
0 %
-
31.12.2025
0.6802
ex 2935 90 90
56
N-(p-Toluenesulphonyl)-N'-(3-(p-toluenesulphonyloxy)phenyl)urea (CAS RN 232938-43-1)
0 %
-
31.12.2025
0.6903
ex 2935 90 90
57
N-{2-[(phenylcarbamoyl)amino]phenyl}benzenesulphonamide (CAS RN 215917-77-4)
0 %
-
31.12.2025
0.6664
ex 2935 90 90
59
Flazasulfuron (ISO) (CAS RN 104040-78-0) with a purity of 94 % by weight or more
0 %
-
31.12.2025
0.4944
ex 2938 90 30
10
Ammonium glycyrrhizate (CAS RN 53956-04-0)
0 %
-
31.12.2025
0.6600
ex 3201 90 90
ex 3202 90 00
40
10
Reaction product of Acacia mearnsii extract, ammonium chloride and formaldehyde (CAS RN 85029-52-3)
0 %
-
31.12.2021
0.5091
ex 3204 11 00
20
Colourant C.I. Disperse Yellow 241 (CAS RN 83249-52-9) and preparations based thereon with a colourant C.I. Disperse Yellow 241 content of 97 % or more by weight
0 %
-
31.12.2021
0.5134
ex 3204 11 00
45
Preparation of dispersion dyes, containing:
C.I. Disperse Orange 61 (CAS RN 12270-45-0) or Disperse Orange 288 (CAS RN 96662-24-7),
C.I. Disperse Blue 291:1 (CAS RN 872142-01-3),
C.I. Disperse Violet 93:1 (CAS RN 122463-28-9),
whether or not containing C.I. Disperse Red 54 (CAS RN 6657-37-0)
0 %
-
31.12.2025
0.6652
ex 3204 12 00
70
Colourant C.I. Acid blue 25 (CAS RN 6408-78-2) and preparations based thereon with a colourant C.I. Acid blue 25 content of 80 % or more by weight
0 %
-
31.12.2025
0.6603
ex 3204 17 00
33
Colourant C.I. Pigment Blue 15:1 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:1 content of 35 % or more by weight
0 %
-
31.12.2025
0.5100
ex 3204 19 00
73
Colourant C.I. Solvent Blue 104 (CAS RN 116-75-6) and preparations based thereon with a colourant C.I. Solvent Blue 104 content of 97 % or more by weight
0 %
-
31.12.2021
0.6726
ex 3208 90 19
55
Preparation of 5 % or more but not more than 20 % by weight of a copolymer of propylene and maleic anhydride, or a blend of polypropylene and a copolymer of propylene and maleic anhydride, or a blend of polypropylene and a copolymer of propylene, isobutene and maleic anhydride in an organic solvent
0 %
-
31.12.2021
0.5031
ex 3215 90 70
40
Dry ink powder with a base of hybrid resin (made from polystyrene acrylic resin and polyester resin) mixed with:
wax
a vinyl-based polymer and
a colouring agent
for use in the manufacture of toner bottles for photocopiers, fax machines, printers and multifunction devices4
0 %
-
31.12.2025
0.4863
ex 3402 11 90
10
Sodium lauroyl methyl isethionate
0 %
-
31.12.2021
0.6725
ex 3506 91 90
50
Preparation containing by weight:
15 % or more but not more than 60 % of styrene butadiene copolymers or styrene isoprene copolymers, and
10 % or more but not more than 30 % of pinene polymers or pentadiene copolymers,
dissolved in:
Methyl ethyl ketone (CAS RN 78-93-3),
Heptane (CAS RN 142-82-5), and
Toluene (CAS RN 108-88-3) or light aliphatic solvent naphtha (CAS RN 64742-89-8)
0 %
-
31.12.2021
0.6759
ex 3802 10 00
10
Mixture of activated carbon and polyethylene, in form of powder
0 %
-
31.12.2025
0.6874
ex 3808 92 30
10
Mancozeb (ISO) (CAS RN 8018-01-7) imported in immediate packings of a content of 500 kg or more3
0 %
-
31.12.2025
0.5048
ex 3808 93 90
20
Preparation consisting of benzyl(purin-6-yl)amine in a glycol solution, containing by weight:
1,88 % or more but not more than 2,00 % of benzyl(purin-6-yl)amine
of a kind used in plant growth regulators
0 %
-
31.12.2025
0.5030
ex 3808 93 90
30
Aqueous solution containing by weight:
1,8 % of sodium para-nitrophenolate,
1,2 % of sodium ortho-nitrophenolate,
0,6 % of sodium 5-nitroguaiacolate,
for use in the manufacture of a plant growth regulator4
0 %
-
31.12.2022
0.5088
ex 3808 93 90
50
Preparation in the form of powder, containing by weight:
55 % or more of Gibberellin A4,
1 % or more but not more than 35 % of Gibberellin A7,
90 % or more of Gibberellin A4 and Gibberellin A7 combined,
not more than 10 % of a combination of water and other naturally occurring Gibberellins,
of a kind used in plant growth regulators
0 %
-
31.12.2021
0.6532
ex 3808 94 20
30
Bromochloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 32718-18-6) containing:
1,3-Dichloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 118-52-5),
1,3-Dibromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 77-48-5),
1-Bromo,3-chloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 16079-88-2), and/or
1-Chloro,3-bromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 126-06-7)
0 %
-
31.12.2024
0.6904
ex 3811 21 00
12
Dispersing agent containing :
esters of polyisobutenyl succinic acid and pentaerythritol (CAS RN 103650-95-9),
35 % or more but not more than 55 % by weight of mineral oils, and
with a chlorine content of not more than 0,05 % by weight,
used in the manufacture of blends of additives for lubricating oils4
0 %
-
31.12.2025
0.6906
ex 3811 21 00
14
Dispersing agent :
containing polyisobutene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 147880-09-9),
containing 35 % or more but not more than 55 % by weight of mineral oils,
with a chlorine content by weight of not more than 0,05 %,
having a total base number of less than 15,
used in the manufacture of blends of additives for lubricating oils4
0 %
-
31.12.2025
0.6907
ex 3811 21 00
16
Detergent containing :
Calcium salt of beta-aminocarbonyl alkylphenol (reaction product Mannich base of alkylphenol)
40 % or more but not more than 60 % by weight of mineral oils and
having a total base number more than 120
used in the manufacture of blends of additives for lubricating oils4
0 %
-
31.12.2025
0.6905
ex 3811 21 00
18
Detergent containing :
long chain alkyltoluene calcium sulphonates,
more than 30 % but not more than 50 % by weight of mineral oils, and
having a total base number of more than 310 but not more than 340,
used in the manufacture of blends of additives for lubricating oils4
0 %
-
31.12.2025
0.6671
ex 3811 21 00
75
Additives containing:
Calcium (C10-C14) dialkylbenzenesulfonates,
more than 40 %, but not more than 60 % by weight of mineral oils,
with a total base number of not more than 10, for use in the manufacture of blends of additives for lubricating oils4
0 %
-
31.12.2022
0.6669
ex 3811 21 00
77
Antifoam additives consisting of:
a copolymer of 2-ethylhexyl acrylate and ethyl acrylate, and
more than 50 % but not more than 80 % by weight of mineral oils,
for use in the manufacture of additive blends for lubricating oils4
0 %
-
31.12.2022
0.6666
ex 3811 21 00
80
Additives containing :
polyisobutylene aromatic polyamine succinimide,
more than 40 % but not more than 60 % by weight of mineral oils,
with a nitrogen content of more than 0,6 % but not more than 0,9 % by weight, for use in the manufacture of additive blends for lubricating oils4
0 %
-
31.12.2022
0.6668
ex 3811 29 00
65
Additives consisting of a sulphurised mixture of vegetable oil, long chain α-olefins and tall oil fatty acids, with a sulphur content of 8 % or more but not more than 12 % by weight, for use in the manufacture of blends of additives for lubricating oils4
0 %
-
31.12.2022
0.5062
ex 3815 90 90
30
Catalyst, consisting of a suspension in mineral oil of:
tetrahydrofuran complexes of magnesium chloride and titanium(III) chloride, and
silicon dioxide,
containing 6,6 % (± 0,6 %) by weight of magnesium, and
containing 2,3 % (± 0,2 %) by weight of titanium
0 %
-
31.12.2025
0.2783
ex 3815 90 90
80
Catalyst consisting predominantly of dinonylnaphthalenedisulphonic acid in the form of a solution in isobutanol
0 %
-
31.12.2025
0.6810
ex 3824 99 92
23
Butylphosphato complexes of titanium(IV) (CAS RN 109037-78-7), dissolved in ethanol and propan-2-ol
0 %
-
31.12.2025
0.4909
ex 3824 99 92
29
Preparation containing by weight:
85 % or more but not more than 99 % of polyethylene glycol ether of butyl 2-cyano 3-(4-hydroxy-3-methoxyphenyl) acrylate, and
1 % or more but not more than 15 % of polyoxyethylene (20) sorbitan trioleate
0 %
-
31.12.2025
0.6779
ex 3824 99 92
40
Solution of 2-chloro-5-(chloromethyl)-pyridine (CAS RN 70258-18-3) in organic diluent
0 %
-
31.12.2025
0.7742
ex 3824 99 92
52
Electrolyte containing:
5 % or more but not more than 20 % lithium hexafluorophosphate (CAS RN 21324-40-3) or lithium tetrafluoroborate (CAS RN 14283-07-9),
60 % or more but not more than 90 % of a mixture of ethylene carbonate (CAS RN 96-49-1), dimethyl carbonate (CAS RN 616-38-6) and/or ethyl methyl carbonate (CAS RN 623-53-0),
0,5 % or more but not more than 20 % 1,3,2-dioxathiolane 2,2-dioxide (CAS RN 1072-53-3),
for use in the manufacture of motor vehicle batteries4
3.2 %
-
31.12.2021
0.5050
ex 3824 99 92
61
3',4',5'-Trifluorobiphenyl-2-amine, in the form of a solution in toluene containing by weight 80 % or more but not more than 90 % of 3',4',5'-trifluorobiphenyl-2-amine
0 %
-
31.12.2025
0.6720
ex 3824 99 92
68
Preparation containing by weight:
20 % (±1 %) ((3-(sec-butyl)-4-(decyloxy)phenyl)methanetriyl) Tribenzene (CAS RN 1404190-37-9)
Dissolved in:
10 % (± 5 %) 2-sec-Butylphenol (CAS RN 89-72-5)
64 %( ±7 %) Solvent naphtha (petroleum), heavy aromatic (CAS RN 64742-94-5) and
6 % (± 1,0 %) Naphthalene (CAS RN 91-20-3)
0 %
-
31.12.2025
0.6719
ex 3824 99 92
69
Preparation containing by weight:
80 % or more but not more than 92 % of Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5)
7 % or more but not more than 20 % oligomers of Bisphenol-A bis(diphenyl phosphate) and
not more than 1 % triphenyl phosphate (CAS RN 115-86-6)
0 %
-
31.12.2021
0.3069
ex 3824 99 92
88
2,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated (CAS RN 9014-85-1)
0 %
-
31.12.2025
0.4719
ex 3824 99 93
35
Paraffin with a level of chlorination of 70 % or more (CAS RN 63449-39-8)
0 %
-
31.12.2024
0.7313
ex 3824 99 96
45
Lithium nickel cobalt aluminium oxide powder (CAS RN 177997-13-6) with:
a particle size of less than 10 μm,
a purity by weight of more than 98 %
3.2 %
-
31.12.2021
0.6628
ex 3824 99 96
46
Manganese zinc ferrite granulate, containing by weight:
52 % or more but not more than 76 % of iron(III)oxide,
13 % or more but not more than 42 % of manganese oxide, and
2 % or more but not more than 22 % of zinc oxide
0 %
-
31.12.2025
0.6749
ex 3824 99 96
48
Zirconium oxide (ZrO2), calcium oxide stabilised (CAS RN 68937-53-1) with a zirconium oxide content by weight of 92 % or more but not more than 97 %
0 %
-
31.12.2025
0.6897
ex 3901 40 00
30
Octene linear low-density polyethylene (LLDPE) produced by a Ziegler-Natta catalyst method in the form of pellets with:
more than 10 % but not more than 20 % by weight of copolymer,
a melt flow rate (MFR 190 °C/2,16 kg) of 0,7 g/10 min or more but not more than 0,9 g/10 min, and
a density (ASTM D4703) of 0,911 g/cm3 or more, but not more than 0,913 g/cm3,
for use in the co-extrusion processing of films for flexible food packaging4
0 %
m3
31.12.2025
0.6920
ex 3901 90 80
53
Copolymer of ethylene and acrylic acid (CAS RN 9010-77-9) with:
an acrylic acid content of 18,5 % or more, but not more than 49,5 % by weight (ASTM D4094), and
a melt flow rate of 10g/10 min or more (125 °C/2,16 kg, ASTM D1238)
0 %
m3
31.12.2025
0.6734
ex 3901 90 80
55
Zinc or sodium salt of an ethylene and acrylic acid copolymer, with:
an acrylic acid content of 6 % or more but not more than 50 % by weight, and
a melt flow rate of 1g/10 min or more at 190 °C/2,16 kg (measured using ASTM D1238)
0 %
-
31.12.2025
0.5049
ex 3901 90 80
67
Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11 % by weight or more
0 %
-
31.12.2025
0.6736
ex 3903 90 90
65
Copolymer of styrene with 2, 5-furandione and (1-methylethyl)benzene in the form of flakes or powder (CAS RN 26762-29-8)
0 %
-
31.12.2025
0.6804
ex 3903 90 90
70
Copolymer in the form of granules containing by weight:
75 % (± 7 %) styrene and
25 % (± 7 %) methylmethacrylate
0 %
m3
31.12.2025
0.4981
ex 3904 69 80
81
Poly(vinylidene fluoride) (CAS RN 24937-79-9)
0 %
-
31.12.2025
0.6672
ex 3906 90 90
33
Core shell copolymer of butyl acrylate and alkyl methacrylate, with a particle size of 5 μm or more but not more than 10 μm
0 %
-
31.12.2025
0.6663
ex 3906 90 90
37
Copolymer of trimethylolpropane trimethacrylate and methyl methacrylate (CAS RN 28931-67-1), in microsphere form with an average diameter of 3 μm
0 %
-
31.12.2025
0.6891
ex 3907 10 00
20
Polyoxymethylene with acetyl endcaps, containing polydimethylsiloxane and fibers of a copolymer of terephthalic acid and 1,4-phenyldiamine
0 %
-
31.12.2022
0.6839
ex 3907 30 00
15
Epoxide resin, halogen-free,
containing by weight more than 2 % phosphorous calculated on the solid content, chemically bound in the epoxide resin,
not containing any hydrolysable chloride or containing less than 300 ppm hydrolysable chloride, and
containing solvents,
for use in the manufacture of prepreg sheets or rolls of a kind used for the production of printed circuits4
0 %
-
31.12.2025
0.6840
ex 3907 30 00
25
Epoxide resin
containing by weight 21 % or more of brome,
not containing any hydrolysable chloride or containing less than 500 ppm hydrolysable chloride, and
containing solvents
0 %
-
31.12.2025
0.4940
ex 3907 99 80
ex 3913 90 00
30
20
Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate)
0 %
-
31.12.2025
0.5057
ex 3907 99 80
80
Copolymer, consisting of 72 % by weight or more of terephthalic acid and/ or derivatives thereof and cyclohexanedimethanol, completed with linear and/ or cyclic dioles
0 %
-
31.12.2025
0.5032
ex 3909 40 00
20
Powder of thermosetting resin in which magnetic particles have been evenly distributed, for use in the manufacture of ink for photocopiers, fax machines, printers and multifunction devices4
0 %
-
31.12.2025
0.6921
ex 3910 00 00
15
Dimethyl, methyl(propyl(polypropylene oxide)) siloxane (CAS RN 68957-00-6), trimethylsiloxy-terminated
0 %
-
31.12.2021
0.7217
ex 3910 00 00
45
Dimethyl siloxane, hydroxy-terminated polymer with a viscosity of 38-100 mPa·s (CAS RN 70131-67-8)
0 %
-
31.12.2021
0.5109
ex 3911 90 99
35
Alternated copolymer of ethylene and maleic anhydride (EMA)
0 %
-
31.12.2025
0.4953
ex 3912 11 00
40
Cellulose diacetate powder
0 %
-
31.12.2025
0.6718
ex 3912 39 85
50
Polyquaternium 10 (CAS RN 68610-92-4)
0 %
-
31.12.2025
0.4757
ex 3919 10 80
37
Polytetrafluoroethylene film:
with a thickness of 100 μm or more,
an elongation at break of not more than 100 %,
coated on one side with a pressure sensitive silicon adhesive
0 %
-
31.12.2025
0.4761
ex 3919 10 80
ex 3919 90 80
43
26
Ethylene vinyl acetate film:
of a thickness of 100 μm or more,
coated on one side with an acrylic pressure sensitive or UV-sensitive adhesive and a polyester or polypropylene liner
0 %
-
31.12.2022
0.6886
ex 3919 10 80
63
Reflecting film consisting of
a layer of an acrylic resin with imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use,
a layer of an acrylic resin having embedded glass beads,
a layer of an acrylic resin hardened by a melamine cross-linking agent,
a metal layer,
an acrylic adhesive, and
a release film
0 %
-
31.12.2025
0.4947
ex 3919 90 80
65
Self-adhesive film with a thickness of 40 μm or more, but not more than 475 μm, consisting of one or more layers of transparent, metallised or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner
0 %
-
31.12.2025
0.4925
ex 3919 90 80
70
Self-adhesive polishing discs of microporous polyurethane, whether or not coated with a pad
0 %
-
31.12.2025
0.4964
ex 3919 90 80
82
Reflecting film consisting of:
a polyurethane layer,
a glass microspheres layer,
a metallised aluminium layer, and
an adhesive, covered on one or both sides with a release liner,
whether or not a poly(vinyl chloride) layer,
a layer whether or not incorporating security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use
0 %
-
31.12.2025
0.6640
ex 3920 10 40
40
Tubular layered film predominately of polyethylene:
consisting of a tri-layer barrier with a core layer of ethylene vinyl alcohol covered on either side with a layer of polyamide, covered on either side with at least one layer of polyethylene,
having a total thickness of 55 μm or more,
having a diameter of 500 mm or more but not more than 600 mm
0 %
-
31.12.2025
0.3357
ex 3920 62 19
48
Sheets or rolls of poly(ethylene terephthalate):
coated on both sides with a layer of epoxy acrylic resin,
of a total thickness of 37 μm (± 3 μm)
0 %
-
31.12.2025
0.2589
ex 3920 62 19
52
Film of polyethylene terephthalate, polyethylene naphthalate or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 μm and having a surface resistivity of not more than 10 000 ohms (per square) (as determined by the ASTM D257 method)
0 %
-
31.12.2023
0.6911
ex 3921 19 00
40
Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, with:
a width of 98 mm or more but not more than170 mm,
a thickness of 15 μm or more but not more than 36 μm,
of a kind used for the manufacture of alkaline battery separators
3.2 %
-
31.12.2021
0.7263
ex 3921 19 00
45
Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with:
zero transversal production direction (TD) shrinkage,
a total thickness of 8 μm or more, but not more than 50 μm,
a width of 15 mm or more, but not more than 900 mm,
a length of more than 200 m, but not more than 8 000 m,
an average pore size between 0,02 μm and 0,1 μm,
laminated or not with a Polypropylene non-woven mat of 50 to 200 μm thickness,
coated or not with surfactant,
coated or not on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm,
coated or not on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μm
3.2 %
-
31.12.2021
0.6742
ex 3921 90 55
40
Three layered fabric sheet, in rolls,
comprising a core layer of 100 % Nylon Taffeta or Nylon/Polyester blended Taffeta,
coated on both sides with polyamide,
of a total thickness not more than 135 μm,
of a total weight not more than 80 g/m2
0 %
m2
31.12.2025
0.7335
ex 3926 30 00
ex 3926 90 97
50
48
Coated interior or exterior decorative parts consisting of:
a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate, and
a PVC foil,
not containing layers of copper, nickel or chromium,
for use in the manufacturing of parts for motor vehicles of heading 8701 to 87054
0 %
p/st
31.12.2022
0.6717
ex 3926 90 97
23
Plastic cover with clips for the exterior rear-view mirror of motor vehicles
0 %
p/st
31.12.2025
0.3850
ex 3926 90 97
43
Mixture of water and by weight 19 % or more but not more than 35 % of expanded hollow microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate or other methacrylate, of a diameter of 3 μm or more but not more than 4,95 μm
0 %
-
31.12.2023
0.6708
ex 4009 42 00
20
Rubber brake hose with:
textile strings,
a wall thickness of 3,2 mm,
a metal hollow terminal pressed on both ends, and
one or more mounting brackets,
for use in the manufacture of goods of Chapter 874
0 %
-
31.12.2025
0.6844
ex 4016 93 00
30
Rectangular ethylene-propylene-diene rubber gasket, with:
a length of 72 mm or more but not more than 825 mm,
a width of 18 mm or more but not more than 155 mm,
a peak temperature of 150°C or more but not more than 240 °C,
a permissible material outflow at the place of the mold split of not more than 0,3 mm
0 %
-
31.12.2025
0.6884
ex 5403 39 00
10
Biodegradable (norm EN 14995) monofilament of not more than 33 dtex, containing at least 98 % by weight polylactide (PLA), for use in the manufacture of filtration fabrics for the food industry4
0 %
-
31.12.2022
0.5059
ex 5603 13 10
20
Non-woven of spunbonded polyethylene, with a coating,
of a weight of more than 80 g/m2 but not more than 105 g/m2 and
an air resistance (Gurley) of 8 seconds or more but not more than 75 seconds (as determined by the ISO 5636/5 method)
0 %
m2
31.12.2025
0.5987
ex 5603 14 90
60
Non-wovens, consisting of poly(ethylene terephthalate) spun bonded media:
of weight of 160 g/m2 or more but not more than 300 g/m2,
not laminated,
with filtration efficiency according to DIN 60335-2-69:2008 minimum Filter class M,
pleatable
0 %
m2
31.12.2023
0.4978
ex 6909 19 00
20
Silicon nitride (Si3N4) rollers or balls
0 %
-
31.12.2025
0.7619
ex 7006 00 90
40
Plates of sodalime or borosilicate glass of STN (Super Twisted Nematic) or TN (Twisted Nematic) quality having:
a length of 300 mm or more but not more than 1 500 mm,
a width of 300 mm or more but not more than 1 500 mm,
a thickness of 0,5 mm or more but not more than 1,1 mm,
an indium-tin-oxide coating with a resistance of 80 Ω or more, but not more than 160 Ω on one side,
with or without a passivation layer of silicon dioxide (SiO2) between indium-tin-oxide layer and glass surface,
with or without a multi layer anti-reflection-coating on the other side, and
machined (chamfered) edges
0 %
-
31.12.2023
0.6870
ex 7009 10 00
40
Electrochromic self-dimming inside rear-view mirror, consisting of:
a mirror support
a plastic casing and
an integrated circuit
for use in the manufacture of motor vehicles of Chapter 874
0 %
-
31.12.2025
0.5021
ex 7019 19 10
20
Yarn of 10,3 tex or more but not more than 11,9 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate
0 %
-
31.12.2025
0.5020
ex 7019 19 10
25
Yarn of 5,1 tex or more but not more than 6,0 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate
0 %
-
31.12.2025
0.4853
ex 7202 99 80
10
Ferro-dysprosium, containing by weight:
78 % or more of dysprosium, and
18 % or more but not more than 22 % of iron
0 %
-
31.12.2025
0.7502
ex 7318 24 00
40
Tube or pipe restraint joint elements:
of stainless steel according to specification 17-4PH or of steel according to specification tool steel S7,
produced by metal injection moulding,
with a rockwell hardness of 38 HRC (± 1) or 53 HRC (+ 2/ – 1),
measuring 7 mm x 4 mm x 5 mm or more, but not more than 40 mm x 20 mm x 10 mm
0 %
-
31.12.2023
0.6680
ex 7326 90 98
40
Iron and steel weights
whether or not with parts of other material
whether or not with parts of other metals
whether or not surface treated
whether or not printed
of a kind used for the production of remote controls
0 %
-
31.12.2025
0.5029
ex 7604 29 10
ex 7606 12 99
ex 7606 12 99
10
21
25
Sheets and bars of aluminium-lithium alloys
0 %
-
31.12.2022
0.5487
ex 7607 11 90
ex 7607 11 90
ex 7607 11 90
ex 7607 11 90
ex 7607 11 90
ex 7607 11 90
48
49
51
52
53
56
Aluminium foil in rolls:
having a purity of 99,99 % by weight,
of a thickness of 0,021 mm or more but not more than 0,2 mm,
with a width of 500 mm,
with a surface oxide layer by 3 to 4 nm thick,
and with a cubic texture of more than 95 %
0 %
-
31.12.2021
0.4050
ex 7607 11 90
60
Plain aluminium foil with the following parameters:
an aluminium content of 99,98 % or more,
a thickness of 0,070 mm or more but not more than 0,125 mm,
with a cubic texture,
of a kind used for high voltage etching
3.7 %
-
31.12.2021
0.7698
ex 7607 20 90
10
Aluminium foil, in rolls:
coated on one side with polypropylene or polypropylene and acid-modified polypropylene and on the other with polyamide and polyethylene terephthalate, with adhesive layers between them,
with a width of 200 mm or more, but not more than 400 mm,
with a thickness of 0,138 mm or more, but not more than 0,168 mm,
for use in the manufacture of lithium-ion battery cell covers4
3.7 %
-
31.12.2021
0.6730
ex 8101 96 00
10
Tungsten wire containing by weight 99 % or more of tungsten with:
a maximum cross-sectional dimension of not more than 50 μm
a resistance of 40 Ω or more but not more than 300 Ω at length of 1 metre
0 %
-
31.12.2025
0.5097
ex 8104 30 00
35
Magnesium powder
of purity by weight of more than 99,5 %
with a particle size of 0,2 mm or more but not more than 0,8 mm
0 %
-
31.12.2025
0.4904
ex 8108 90 30
45
Titanium-aluminium-vanadium alloy (TiAl6V4) wire, of a diameter less than 20 mm and complying with AMS standards 4928, 4965 or 4967
0 %
-
31.12.2025
0.6805
ex 8113 00 90
20
Cuboid spacer made of aluminium silicon carbide (AlSiC) composite used for packaging in IGBT-modules
0 %
-
31.12.2025
0.5024
ex 8301 60 00
ex 8419 90 85
ex 8479 90 70
ex 8481 90 00
ex 8503 00 99
ex 8515 90 80
ex 8537 10 98
ex 8538 90 99
ex 8708 99 10
ex 8708 99 97
30
40
30
50
43
40
55
70
55
22
Silicone or plastic keyboards, comprising:
parts of common metal, and
whether or not comprising parts of plastic,
epoxy resin reinforced with fiberglass or wood,
whether or not printed or surface-treated,
with or without electrical conductors,
with or without a membrane bonded to the keyboard,
with or without mono or multilayer protective film
0 %
p/st
31.12.2025
0.4996
ex 8407 90 90
20
Compact Liquid Petroleum Gas (LPG) Engine System, with:
6 cylinders,
an output of 75 kW or more, but not more than 80 kW,
inlet and exhaust valves modified to operate continuously in heavy duty applications,
for use in the manufacture of vehicles of heading 84274
0 %
-
31.12.2025
0.6160
ex 8414 30 81
ex 8414 80 73
60
30
Hermetic rotary compressors for either hydrofluorocarbon (HFC) or hydrocarbon refrigerants:
driven by “on-off” single phase alternate current (AC) or “brushless direct current” (BLDC) variable speed motors,
with a nominal power rating of not more than 1,5 kW,
a rated voltage of 100 V or more but not more than 240 V,
with a height of not more than 300 mm,
an external diameter of not more than 150 mm,
with a unit weight of not more than 15 kg,
for use in the manufacture of heat pumps for household appliances, including clothes dryers4
0 %
-
31.12.2023
0.7317
ex 8414 80 22
20
Air membrane compressor with:
a flow of 4,5 l/min or more, but not more than 7 l/min,
power input of not more than 8,1 W, and
a gauge pressure capacity not exceeding 400 hPa (0,4 bar),
of a kind used in the production of motor vehicle seats
0 %
-
31.12.2022
0.6842
ex 8415 90 00
60
Flame-soldered aluminium block, for connecting tube with condenser in car air-conditioning systems, with:
extruded, bent connector lines of aluminium with an external diameter of 5 mm or more, but not more than 25 mm,
a weight of 0,02 kg or more but not more than 0,25 kg
0 %
p/st
31.12.2025
0.6860
ex 8415 90 00
65
Aluminium arc-welded removable receiver dryer, with polyamide and ceramic elements with:
a length of 143 mm or more but not more than 292 mm,
a diameter of 31 mm or more but not more than 99 mm,
with a weight of not less than 0,12 kg and not more than 0,9 kg,
a spangle length of not more than 0,2 mm and a thickness of not more than 0,06 mm, and
a solid particle diameter of not more than 0,06 mm,
for use in the manufacture of car air-conditioning systems4
0 %
p/st
31.12.2022
0.6821
ex 8436 99 00
10
Part containing:
a single-phase AC motor,
an epicyclic gearing,
a cutter blade,
and whether or not containing:
a capacitor,
a part fitted with a threaded bolt,
for use in the manufacture of garden shredders4
0 %
p/st
31.12.2025
0.7380
ex 8481 80 59
30
Two-way flow control valve with housing, with:
at least 5, but not more than 16 outlet holes with at least 0,05 mm, but not more than 0,5 mm diameter,
at least 330 cm3/minute, but not more than 5 000 cm3/minute flow rate,
at least 19, but not more than 300 MPa operating pressure
0 %
-
31.12.2022
0.7518
ex 8481 90 00
40
Valve armature:
for the opening and closing of the flow of fuel,
consisting of a shaft and a blade,
with at least 3 but not more than 8 holes on the blade,
made of metal and/or metal alloy(s)
0 %
-
31.12.2023
0.4997
ex 8483 40 90
80
Transmission gearbox, with:
not more than 3 gears,
an automatic deceleration system, and
a power reversal system,
for use in the manufacture of goods of heading 84274
0 %
p/st
31.12.2025
0.6854
ex 8501 10 10
20
Synchronous motor for a dishwasher with a water flow control mechanism with
a length without axle of 24 mm (± 0,3),
a diameter of 49,3 mm (± 0,3),
a rated voltage of 220 V AC or more but not more than 240 V AC,
a rated frequency of 50 Hz or more but not more than 60 Hz,
an input power of not more than 4 W,
a rotation speed of 4rpm or more but not more than 4,8rpm,
an output torque of not less than 10kgf/cm
0 %
-
31.12.2022
0.6858
ex 8501 10 99
64
DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve:
with Ingress Protection (IP) standard of IP69,
with a rotor speed of not more than 6 500 rpm when not loaded,
with a rated voltage of 12,0 V (± 0,1),
of a specified temperature range of – 40 °C or more, but not more than + 165 °C,
with or without a connecting pinion,
with or without an engine connector,
with or without a flange,
with a diameter of not more than 40 mm (not including the flange),
with an overall height of not more than 90 mm (from the base to the pinion)
0 %
-
30.06.2021
0.6880
ex 8501 10 99
65
Electric turbocharger actuator, with:
a DC motor,
an integrated gear mechanism,
a (pulling)force of 200 N or more at a minimum of 140 °C elevated ambient temperature,
a (pulling) force of 250 N or more in each position of its stroke,
an effective stroke of 15 mm or more but not more than 25 mm,
with or without an on-board diagnostics interface
0 %
-
31.12.2025
0.6627
ex 8501 10 99
75
Permanently excited DC motor with
a multiple-phase winding,
an external diameter of 28 mm or more but not more than 35 mm,
a rated speed of not more than 12 000 rpm,
a power supply voltage of 8 V or more but not more than 27 V
0 %
-
31.12.2025
0.4731
ex 8501 31 00
37
Permanently excited DC motor with
a multiple-phase winding,
an external diameter of 30 mm or more but not more than 90 mm, including mounting flange,
a rated speed of not more than 15 000 rpm,
an output of 45 W or more but not more than 400 W, and
a supply voltage of 9 V or more but not more than 50 V,
whether or not with a drive disc,
whether or not with a crankcase,
whether or not with a fan,
whether or not with a cap assembly,
whether or not with a sun gear,
whether or not with a speed and rotational direction encoder,
whether or not with or without a speed or rotational direction sensor of resolver type or Hall effect type,
whether or not with a mounting flange
0 %
-
31.12.2024
0.5577
ex 8501 31 00
50
DC motors, brushless, with:
an external diameter of 80 mm or more, but not more than 200 mm,
a supply voltage of 9 V or more, but not more than 16 V,
an output at 20 °C of 300 W or more, but not more than 750 W,
a torque at 20 °C of 2,00 Nm or more, but not more than 7,00 Nm,
a rated speed at 20 °C of 600 rpm or more, but not more than 3 100 rpm,
with or without a pulley,
with or without an electronic power steering sensor/controller
0 %
-
31.12.2022
0.6809
ex 8501 31 00
ex 8501 32 00
53
45
Automotive-ready, brushless and permanently excited direct current motor with:
a specified speed of not more than 4 100 rpm,
a minimum output of 400 W, but not more than 1,3 kW (at 12 V),
a flange diameter of 85 mm or more, but not more than 200 mm,
a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending,
a housing length of not more than 265 mm, measured from the flange to the outer ending,
0 %
-
31.12.2025
a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease),
a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and
surface magnets,
whether or not with electronic power steering controller
0.6161
ex 8503 00 99
55
Stator for brushless motor, with:
an internal diameter of 206,6 mm (± 0,5),
an external diameter of 265,0 mm (± 0,2), and
a width of 37,2 mm or more but not more than 47,8 mm,
of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums
0 %
p/st
31.12.2025
0.7764
ex 8504 31 80
55
Electrical transformer with:
a capacity of 0,22 kVA or more, but not more than 0,24 kVA,
an operating temperature range of + 10°C or more, but not more than + 125°C,
four or five inductively coupled copper wire windings,
11 or 12 connection pins at the bottom, and
dimensions of not more than 32 mm x 37,8 mm x 25,8 mm
0 %
-
31.12.2024
0.7788
ex 8505 11 00
68
Blocks made of neodymium, iron and boron or an alloy of samarium and cobalt, whether or not covered with zinc, intended to become permanent magnets after magnetisation with:
a length of 13,8 mm or more but not more than 45,2 mm,
a width of 7,8 mm or more but not more than 25,2 mm,
a height of 1,3 mm or more but not more than 4,7 mm
0 %
-
31.12.2024
0.6857
ex 8505 11 00
ex 8505 19 90
73
35
Articles in shape of flat bars, arched bars or quarter sleeves, made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy, whether or not overmolded with polymers, intended to become permanent magnets after magnetisation with:
a length of 5 mm or more, but not more than 60 mm,
a width of 5 mm or more, but not more than 40 mm,
a thickness of 3 mm or more, but not more than 15 mm
0 %
p/st
31.12.2022
0.7641
ex 8507 60 00
13
Prismatic lithium-ion electric accumulators with:
a width of 173,0 mm (± 0,3 mm),
a thickness of 45,0 mm (± 0,3 mm),
a height 125,0 mm (± 0,3 mm),
a nominal voltage of 3,67 V (± 0,01 V), and
a nominal capacity of 94 Ah and/or 120 Ah,
for use in the manufacture of rechargeable electric vehicle batteries4
1.3 %
-
31.12.2021
0.6685
ex 8507 60 00
15
Cylindrical lithium-ion-accumulators or modules with:
a nominal capacity of 8,8 Ah or more, but not more than 18 Ah,
a nominal voltage of 36 V or more, but not more than 48 V,
a power of 300 Wh or more, but not more than 648 Wh,
for use in the manufacture of electric bicycles4
1.3 %
-
31.12.2021
0.6625
ex 8507 60 00
17
Lithium-ion starter accumulator, consisting of four rechargeable lithium-ion secondary cells, with:
a rated voltage of 12 V,
a length of 350 mm or more but not more than 355 mm,
a width of 170 mm or more but not more than 180 mm,
a height of 180 mm or more but not more than 195 mm,
weighing 10 kg or more but not more than 15 kg,
a nominal charge of 60 Ah or more, but not more than 80 Ah
1.3 %
-
31.12.2021
0.7663
ex 8507 60 00
18
Lithium-ion polymer accumulator equipped with a battery management system and can-bus interface with:
a length of not more than 1 600 mm,
a width of not more than 448 mm,
a height of not more than 395 mm,
a nominal voltage of 280 V or more but not more than 400 V,
a nominal capacity of 9,7 Ah or more but not more than 10,35 Ah,
a charging voltage of 110 V or more but not more than 230 V, and
containing 6 modules with 90 cells or more but not more than 96 cells enclosed in a steel casing,
for use in the manufacture of vehicle capable of being charged by plugging to external source of electric power of heading 87034
1.3 %
-
31.12.2021
0.7717
ex 8507 60 00
22
Integrated battery system in a metal case with holders, consisting of:
a lithium-ion battery with voltage of 48 V (± 5 V) and capacity of 0,44 kWh (± 0,05 kWh),
Battery Management System,
a relay,
a low voltage converter (DC/DC),
at least one connector,
for use in the manufacture of hybrid motor vehicles4
1.3 %
-
31.12.2021
0.2907
ex 8507 60 00
30
Cylindrical lithium-ion accumulator or module, with a length of 63 mm or more and a diameter of 17,2 mm or more, having a nominal capacity of 1 200 mAh or more, for use in the manufacture of rechargeable batteries4
1.3 %
-
31.12.2021
0.6703
ex 8507 60 00
33
Lithium-ion accumulator, with:
a length of 150 mm or more, but not more than 1 000 mm,
a width of 100 mm or more, but not more than 1 000 mm,
a height of 200 mm or more, but not more than 1 500 mm,
a weight of 75 kg or more, but not more than 200 kg,
a nominal capacity not less than 150Ah and not more than 500 Ah,
a nominal output voltage of 230V AC (Line to neutral) or a nominal voltage of 64V (±10 %)
1.3 %
-
31.12.2021
0.6702
ex 8507 60 00
37
Lithium-ion accumulator, with:
a length of 1 200 mm or more, but not more than 2 000 mm,
a width of 800 mm or more, but not more than 1 300 mm,
a height of 2 000 mm or more, but not more than 2 800 mm,
a weight of 1 800 kg or more, but not more than 3 000 kg,
a nominal capacity of 2 800 Ah or more but not more than 7 200 Ah
1.3 %
-
31.12.2021
0.5548
ex 8507 60 00
50
Modules for the assembly of batteries of ion lithium electric accumulators with:
a length of 298 mm or more, but not more than 500 mm,
a width of 33,5 mm or more, but not more than 209 mm,
a height of 75 mm or more, but not more than 228 mm,
a weight of 3,6 kg or more, but not more than 17 kg, and
a nominal energy of 458 Wh or more, but not more than 2 158 Wh
1.3 %
-
31.12.2021
0.5342
ex 8507 60 00
65
Cylindrical lithium ion cell with
3,5 VDC to 3,8 VDC,
300 mAh to 900 mAh, and
a diameter of 10,0 mm to 14,5 mm
1.3 %
-
31.12.2021
0.7888
ex 8507 60 00
68
Lithium-ion accumulator in a metal housing, with
a length of 65 mm or more, but not more than 225 mm,
a width of 10 mm or more, but not more than 75 mm,
a height of 60 mm or more, but not more than 285 mm,
a nominal voltage of 2,1 V or more, but not more than 3,8 V, and
a nominal capacity of 2,5 Ah or more, but not more than 325 Ah
1.3 %
-
31.12.2021
0.5356
ex 8507 60 00
75
Rectangular lithium-ion-accumulator, with
a metal casing,
a length of 173 mm (± 0,15 mm),
a width of 21 mm (± 0,1 mm),
a height of 91 mm (± 0,15 mm),
a nominal voltage of 3,3 V, and
a nominal capacity of 21 Ah or more
1.3 %
-
31.12.2021
0.6753
ex 8507 60 00
77
Lithium-ion rechargeable batteries, with:
a length of 700 mm or more, but not more than 2 820 mm,
a width of 935 mm or more, but not more than 1 660 mm,
a height of 85 mm or more, but not more than 700 mm,
a weight of 250 kg or more, but not more than 700 kg,
a power of not more than 175 kWh,
a nominal voltage of 400 V
1.3 %
-
31.12.2021
0.5014
ex 8508 70 00
ex 8537 10 98
20
98
Electronic circuit cards that:
are connected by wire or radio frequency to each other and the motor controller card, and
regulate the functioning (switching on or off and suction capacity) of vacuum cleaners according to a stored program,
whether or not fitted with indicators that display the functioning of the vacuum cleaner (suction capacity and/or dust bag full and/or filter full)
0 %
p/st
31.12.2025
0.6856
ex 8512 20 00
30
Lighting module, containing at least:
two LEDs,
glass or plastic lenses, focusing/scattering the light emitted by the LEDs,
reflectors redirecting the light emitted by the LEDs,
in an aluminium housing with a radiator, mounted at a bracket with an actuator
0 %
p/st
31.12.2025
0.6863
ex 8512 30 90
20
Warning buzzer for parking sensor system in a plastic casing operating on the piezo-mechanic principle, containing:
a printed circuit board,
a connector,
whether or not a metal holder,
for use in the manufacture of goods of Chapter 874
0 %
p/st
31.12.2022
0.6689
ex 8529 90 65
28
Electronic assembly comprising at least:
a printed circuit board with,
one or more FPGAs (Field Programmable Gate Array) and/or processors for multi-media applications and video signal processing,
flash memory,
operating memory,
with or without one or more USB, HDMI, VGA-, RJ-45 and/or other multimedia interfaces,
sockets and plugs for connecting a LCD-display, a LED lighting and a control panel
0 %
p/st
31.12.2025
0.4893
ex 8529 90 65
ex 8529 90 92
65
53
Printed circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT glass panel of a LCD module
0 %
p/st
31.12.2025
0.4890
ex 8529 90 92
25
LCD modules, not combined with touch screen facilities, solely consisting of:
one or more TFT glass or plastic cells,
a die cast heat sink,
a backlight unit,
one printed circuit board with micro controller, and
LVDS (Low Voltage Differential Signalling) interface,
for use in the manufacture of radios for motor vehicles4
0 %
p/st
31.12.2025
0.6654
ex 8529 90 92
37
Fastening and covering ledges of aluminium alloy containing:
silicon and magnesium,
with a length of 300 mm or more but not more than 2 200 mm,
specifically shaped for use in the manufacture of TV sets4
0 %
-
31.12.2025
0.6629
ex 8529 90 92
63
LCD module
with a diagonal measurement of the screen of 14,5 cm or more but not more than 38,5 cm,
with or without a touch screen,
with an LED backlight,
with a printed circuit board with EEPROM, microcontroller, LVDS receiver and other active and passive components,
with a plug for power supply and CAN and LVDS interfaces,
with or without electronic components for dynamic adjustments of colour,
in a housing, with or without mechanical, touch-sensitive or contactless control functions and with or without active cooling system,
suitable for installation in motor vehicles of Chapter 874
0 %
p/st
31.12.2025
0.5018
ex 8529 90 92
67
Colour LCD display panel for LCD monitors of heading 8528:
with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm,
with or without a touch screen,
with backlight, micro-controller,
with a CAN (Controller area network)-controller with one or more LVDS (Low-voltage differential signalling) interfaces and one or more CAN/power supply sockets or with an APIX (Automotive Pixel Link) controller with APIX interface,
in a housing with or without a heat sink at the back of the housing,
without a signal-processing module,
whether or not with haptic and acoustical feedback,
for use in the manufacture of vehicles of Chapter 874
0 %
p/st
31.12.2025
0.6781
ex 8529 90 92
85
Colour LCD module in a housing:
with a diagonal screen measurement of 14,48 cm or more but not more than 26 cm,
without touch screen,
with a backlight and micro-controller,
with a CAN (Controller Area Network) controller, an LVDS (Low-Voltage Differential Signalling) interface and a CAN/power connector,
without a signal processing module,
with control electronics for pixel addressing only,
with a motorised mechanism for moving the display screen,
for permanent installation in vehicles of Chapter 874
0 %
p/st
31.12.2025
0.6849
ex 8536 69 90
60
Electrical sockets and plugs with a length of not more than 12,7 mm or a diameter of not more than 10,8 mm, for use in the production of hearing aids and speech processors4
0 %
p/st
31.12.2022
0.5028
ex 8536 69 90
84
Universal serial bus (USB) socket or plug in a single or multiple form for connecting with other USB devices, for use in the manufacture of goods falling within headings 8521 or 85284
0 %
p/st
31.12.2025
0.6864
ex 8537 10 91
50
Fuse control module in a plastic housing with mounting brackets comprising:
sockets with or without fuses,
connecting ports,
a printed circuit board with embedded microprocessor, micro switch and relay,
of a kind used in the manufacture of goods of Chapter 87
0 %
p/st
31.12.2025
0.6889
ex 8537 10 98
35
Electronic control unit without memory, for a voltage of 12 V, for information exchange systems in vehicles (for connection of audio, telephony, navigation, camera and wireless car service) containing:
2 rotary knobs
27 or more pushbuttons
LED lights
2 integrated circuits for receiving and sending of control signals via the LIN-bus
0 %
p/st
31.12.2025
0.6866
ex 8538 90 91
ex 8538 90 99
20
50
Interior antenna for a car door locking system, comprising:
an antenna module in a plastic housing,
a connection cable with a plug,
at least two mounting brackets,
whether or not PCB including integrated circuits, diodes and transistors,
for use in the manufacture of goods of Chapter 874
0 %
p/st
31.12.2025
0.6710
ex 8544 30 00
ex 8544 42 90
60
50
Four-core connecting cable containing two female connectors for the transmission of digital signals from navigation and audio systems to a USB connector, for use in the manufacture of goods of Chapter 874
0 %
-
31.12.2025
0.6867
ex 8544 30 00
85
Extension two-core cable with two connectors, containing at least:
a rubber grommet,
a metal attachment bracket,
of a kind used to connect vehicle speed sensors in the manufacture of vehicles of Chapter 87
0 %
p/st
31.12.2025
0.6853
ex 8544 42 90
70
Electric conductors:
of a voltage of not more than 80 V,
with a length of not more than 120 cm,
fitted with connectors,
for use in the manufacture of hearing aids, accessory kits and speech processors4
0 %
p/st
31.12.2025
0.6861
ex 8544 49 93
30
Electric conductors:
of a voltage of not more than 80 V,
of a platinum-iridium-alloy,
coated with poly(tetrafluoroethylene),
without connectors,
for use in the manufacture of hearing aids, implants and speech processors4
0 %
m
31.12.2025
0.5002
ex 8545 90 90
40
Corrosion resistant, layered technical fibre substrate of a gas diffuser layer with:
controlled fibre length, flex strength, porosity, thermal conductance, electrical resistance,
a thickness of less than 600 μm,
a weight of less than 500 g/m2
0 %
m2
31.12.2021
0.6707
ex 8708 30 10
ex 8708 30 91
70
40
Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of Chapter 87
0 %
p/st
31.12.2025
0.6869
ex 8708 40 20
ex 8708 40 50
20
10
Automatic hydrodynamic gearbox
with a hydraulic torque converter,
without transfer box and cardan shaft,
whether or not with front differential,
for use in the manufacture of motor vehicles of Chapter 874
0 %
p/st
31.12.2025
0.6648
ex 8708 50 20
ex 8708 50 99
20
10
Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle
of a length of 1 m or more but not more than 2 m,
of a weight of 6 kg or more but not more than 9 kg
0 %
p/st
31.12.2025
0.6711
ex 8708 80 20
ex 8708 80 35
10
10
Upper strut insulator containing:
a metal holder with three mounting screws, and
a rubber bump,
for use in the manufacture of goods of Chapter 874
0 %
p/st
31.12.2025
0.6859
ex 8708 91 20
ex 8708 91 99
30
30
Aluminium alloy inlet or outlet air tank manufactured to standard EN AC 42100 with:
an insulating area flatness of not more than 0,1 mm,
a permissible particle quantity of 0,3 mg per tank,
a distance between pores of 2 mm or more,
pore sizes of not more than 0,4 mm, and
not more than 3 pores larger than 0,2 mm,
of a kind used in heat exchangers for car cooling systems
0 %
p/st
31.12.2025
0.7716
ex 8708 91 35
20
Turbocharger cooling duct containing:
an aluminium alloy duct with at least one metal holder and at least two mounting holes,
a rubber pipe with clips,
a stainless steel flange highly resistant to corrosion [SUS430JIL],
for use in the manufacture of compression ignition engines of motor vehicles4
0 %
-
31.12.2024
0.6687
ex 8708 95 10
ex 8708 95 99
10
20
Inflatable safety cushion of high strength polyamide fibre:
sewn,
folded into three-dimensional packing form, fixed by thermal forming, or flat (unfolded) safety cushion with or without thermal forming
0 %
p/st
31.12.2025
0.6688
ex 8708 95 10
ex 8708 95 99
20
30
Inflatable safety cushion of high strength polyamide fibre:
sewn,
folded,
with three-dimensionally applied silicone bonding for air bag cavity forming and load-regulated air bag sealing,
suitable for cool inflator technology
0 %
p/st
31.12.2025
0.7581
ex 8708 50 20
ex 8708 50 99
60
15
Car transfer case with single input, dual output, to distribute torque between front and rear axles in an aluminium housing, with dimension of not more than 565 × 570 × 510 mm, comprising:
at least an actuator,
whether or not an interior distribution by chain
0 %
-
31.12.2024
0.6686
ex 8714 10 90
10
Motorcycle fork rod inner tubes:
of SAE1541 carbon steel,
with a hard chromium layer of 20 μm (+ 15 μm/ – 5 μm),
having a wall thickness of 1,3 mm or more, but not more than 1,6 mm,
having an elongation at break of 15 %,
perforated
0 %
p/st
31.12.2025
0.6848
ex 8714 10 90
70
Motor bikes radiators in consignment of 100 pieces or more
0 %
p/st
31.12.2022
0.6879
ex 8714 96 10
10
Pedals, for use in the manufacture of bicycles (including electric bicycles)4
0 %
-
31.12.2025
0.6878
ex 8714 99 90
30
Seat posts, for use in the manufacture of bicycles (including electric bicycles)4
0 %
p/st
31.12.2025
0.4883
ex 9001 90 00
85
Light guide panel made of poly(methyl methacrylate):
whether or not cut,
whether or not printed,
for use in the manufacture of backlight units for flat screen TVs4
0 %
-
31.12.2025
0.7590
ex 9002 11 00
18
Lens assembly consisting of a cylinder-shaped cover made of metal or plastic and optical elements with:
a horizontal field of view range to a maximum of 120 deg,
a diagonal field of view range to a maximum of 92 deg,
a focal length to a maximum of 7,50 mm,
a relative aperture of a maximum of F/2,90,
a maximum diameter of 22 mm
0 %
-
31.12.2023
0.5692
ex 9002 11 00
20
Lenses:
measuring not more than 95 mm × 55 mm × 50 mm,
with a resolution of 160 lines/mm or better, and
with a zoom ratio of 3 or more times
0 %
-
31.12.2022
0.5025
ex 9401 90 80
10
Ratchet disk for use in the manufacture of reclining car seats4
0 %
p/st
31.12.2025
0.4846
ex 9503 00 75
ex 9503 00 95
10
10
Plastic cable car scale models, whether or not with a motor, for printing4
0 %
p/st
31.12.2025
0.6950
ex 9607 20 10
10
Sliders, narrow tape with mounted zipper teeth, pin/boxes and other parts of slide fasteners, of base metal for use in the manufacture of zippers4
0 %
-
31.12.2022
0.6949
ex 9607 20 90
10
Narrow strips mounted with plastic chain scoops for use in the manufacture of zippers4
0 %
-
31.12.2025
However, the suspension of tariff duties does not apply where the processing is carried out by retail or catering undertakings.
Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).
Only the ad valorem duty is suspended. The specific duty shall continue to apply.’;
- (3)
the following entries are added or inserted according to the numerical order of the CN and TARIC codes in the second and third columns:
Serial Number
CN code
TARIC
Description
Rate of autonomous duty
Supplementary Unit
Date foreseen for mandatory review
‘0.8021
2804 70 10
Red phosphorus
0 %
-
31.12.2022
0.8022
2804 70 90
Phosphorus, other than red phosphorus
0 %
-
31.12.2023
0.7974
ex 2903 39 19
40
3-(Bromomethyl)pentane (CAS RN 3814-34-4) with a purity by weight of 99 % or more
0 %
-
31.12.2025
0.8017
ex 2903 99 80
25
2,2'-Dibromobiphenyl (CAS RN 13029-09-9) with a purity by weight of 95 % or more
0 %
-
31.12.2025
0.8018
ex 2903 99 80
35
2-Bromo-9,9'-spirobi[9H-fluoren] (CAS RN 171408-76-7) with a purity by weight of 95 % or more
0 %
-
31.12.2025
0.7957
ex 2904 99 00
55
2,4-dichloro-1,3-dinitro-5-(trifluoromethyl)benzene (CAS RN 29091-09-6) with a purity by weight of 96 % or more
0 %
-
31.12.2025
0.7963
ex 2906 29 00
70
1,2,3,4-Tetrahydro-1-naphthol (CAS RN 529-33-9) with a purity by weight of 95 % or more
0 %
-
31.12.2025
0.8015
ex 2914 29 00
35
4-(trans-4-Propylcyclohexyl)cyclohexanone (CAS RN 82832-73-3) with a purity by weight of 95 % or more
0 %
-
31.12.2025
0.7955
ex 2915 24 00
10
Acetic anhydride (CAS RN 108-24-7) with a purity by weight of 97 % or more
0 %
-
31.12.2025
0.7980
ex 2916 19 95
60
Methyl 2-fluoroprop-2-enoate (CAS RN 2343-89-7) with a purity by weight of 93 % or more, whether or not with not more than 7 % of the stabiliser 2,6-di-tert-butyl-p-cresol (CAS RN 128-37-0) and Tetrabutylammonium nitrite (CAS RN 26501-54-2)
0 %
-
31.12.2025
0.7940
ex 2916 19 95
70
Methyl 3-methyl-2-butenoate (CAS RN 924-50-5) with a purity by weight of 99,0 % or more
0 %
-
31.12.2025
0.7931
ex 2916 20 00
25
Cyclohexanecarbonyl chloride (CAS RN 2719-27-9) with a purity by weight of 99 % or more
0 %
-
31.12.2025
0.7933
ex 2916 20 00
35
2-Cyclopropylacetic acid (CAS RN 5239-82-7) with a purity by weight of 95 % or more
0 %
-
31.12.2025
0.7929
ex 2916 39 90
16
3-Fluoro-5-iodo-4-methylbenzoic acid (CAS RN 861905-94-4) with a purity by weight of 97 % or more
0 %
-
31.12.2025
0.8008
ex 2918 29 00
40
3-Hydroxy-4-nitrobenzoic acid (CAS RN 619-14-7) with a purity by weight of more than 96,5 %
0 %
-
31.12.2025
0.7934
ex 2918 99 90
43
Vanillic acid (CAS RN 121-34-6) with a purity by weight of 98,5 % or more
0 %
-
31.12.2025
0.7947
ex 2921 29 00
70
N,N,N',N'-tetramethylethylenediamine (CAS RN 110-18-9) with a purity by weight of 99 % or more
0 %
-
31.12.2025
0.8019
ex 2921 49 00
45
2-(4-Biphenylyl)amino-9,9-dimethylfluoren (CAS RN 897671-69-1) with a purity by weight of 95 % or more
0 %
-
31.12.2025
0.8020
ex 2921 49 00
55
2-(2-Biphenylyl)amino-9,9-dimethylfluoren (CAS RN 1198395-24-2) with a purity by weight of 95 % or more
0 %
-
31.12.2025
0.7946
ex 2922 19 00
29
N-Methyl-N-(2-hydroxyethyl)-p-toluidine (CAS RN 2842-44-6) with a purity by weight of 99 % or more
0 %
-
31.12.2025
0.7935
ex 2922 19 00
70
2-Benzylaminoethanol (CAS 104-63-2) with a purity by weight of 98 % or more
0 %
-
31.12.2025
0.8000
ex 2924 19 00
18
2-(((Butylamino)carbonyl)oxy)ethyl acrylate (CAS RN 63225-53-6) with a purity by weight of 97 % or more
0 %
-
31.12.2025
0.8013
ex 2925 19 95
40
N-Iodosuccinimide (CAS RN 516-12-1) with a purity by weight of 98,5 % or more
0 %
-
31.12.2025
0.7985
ex 2930 90 98
88
1-{4-[(4-Benzoylphenyl)sulphanyl]phenyl}-2-methyl-2-[(4-methylphenyl)sulphonyl]propan-1-one (CAS RN 272460-97-6) with a purity by weight of 94 % or more
0 %
-
31.12.2025
0.7951
ex 2931 90 00
25
N-(3-(dimethoxymethylsilyl)propyl)ethylenediamine (CAS RN 3069-29-2) with a purity by weight of 98 % or more
0 %
-
31.12.2025
0.7958
ex 2932 20 90
18
4-Hydroxycoumarin (CAS-RN 1076-38-6) with a purity by weight of 98 % or more
0 %
-
31.12.2025
0.7984
ex 2932 20 90
23
1,4-Dioxane-2,5-dione (CAS RN 502-97-6) with a purity by weight of 99,5 % or more
0 %
-
31.12.2025
0.7978
ex 2932 99 00
68
3,9-Diethylidene-2,4,8,10-tetraoxaspiro[5.5]undecane (CAS RN 65967-52-4) with a purity by weight of 98 % or more
0 %
-
31.12.2025
0.7930
ex 2932 99 00
73
5-Fluoro-3-methylbenzofuran-2-carboxylic acid (CAS RN 81718-76-5) with a purity by weight of 97 % or more
0 %
-
31.12.2025
0.7936
ex 2932 99 00
78
Methyl 2,2-difluoro-1,3-benzodioxole-5-carboxylate (CAS RN 773873-95-3) with a purity by weight of 98 % or more
0 %
-
31.12.2025
0.7954
ex 2932 99 00
83
6,11-Dihydrodibenz[b,e]oxepin-11-one (CAS RN 4504-87-4) with a purity by weight of 98 % or more
0 %
-
31.12.2025
0.7938
ex 2933 19 90
43
tert-Butyl 2-(3,5-dimethyl-1H-pyrazol-4-yl)acetate (CAS RN 1082827-81-3) with a purity by weight of 95 % or more
0 %
-
31.12.2025
0.7937
ex 2933 29 90
23
1,1'-Thiocarbonylbis(imidazole) (CAS RN 6160-65-2) with a purity by weight of 95 % or more
0 %
-
31.12.2025
0.7976
ex 2933 39 99
83
2-Hydroxy-4-azoniaspiro[3,5]nonane chloride (CAS RN 15285-58-2) with a purity by weight of 97 % or more
0 %
-
31.12.2025
0.7925
ex 2933 39 99
84
Diethyl(3-pyridyl)borane (CAS RN 89878-14-8) with a purity by weight of 98 % or more
0 %
-
31.12.2025
0.7981
ex 2933 39 99
86
3-(N-hydroxycarbamimidoyl)pyridine 1-oxide (CAS RN 92757-16-9) with a purity by weight of 97 % or more
0 %
-
31.12.2025
0.7939
ex 2933 39 99
87
6-Chloro-N-(2,2-dimethylpropyl)pyridine-3-carboxamide (CAS RN 585544-20-3) with a purity by weight of 97 % or more
0 %
-
31.12.2025
0.7986
ex 2933 39 99
88
Benzyl 4-amino-3-chloro-6-(4-chloro-2-fluoro-3-methoxyphenyl)-5-fluoropyridine-2-carboxylate (CAS RN 1390661-72-9) with a purity by weight of 92 % or more
0 %
-
31.12.2025
0.7952
ex 2933 69 80
33
2,4,6-Trichloro-1,3,5-triazine (CAS RN 108-77-0) with a purity by weight of 99 % or more
0 %
-
31.12.2025
0.7927
ex 2933 99 80
60
2-[(6,11-Dihydro-5H-dibenz[b,e]azepin-6-yl)-methyl]-1H-isoindole-1,3(2H)-dione (CAS RN 143878-20-0) with a purity by weight of 99 % or more
0 %
-
31.12.2025
0.7971
ex 2933 99 80
70
5-(Bis-(2-hydroxyethyl)-amino)-1-methyl-1H-benzimidazole-2-butanoic acid ethyl ester (CAS RN 3543-74-6) with a purity by weight of 98 % or more
0 %
-
31.12.2025
0.8014
ex 2933 99 80
80
Pyrrole-2-carboxaldehyde (CAS RN 1003-29-8) with a purity by weight of 97 % or more
0 %
-
31.12.2025
0.7926
ex 2934 99 90
65
Benzo[b]thiophen-10-methoxycycloheptanone (CAS RN 59743-84-9) with a purity by weight of 98 % or more
0 %
-
31.12.2025
0.7944
ex 2934 99 90
70
1,3,4-thiadiazolidine-2,5-dithione (CAS RN 1072-71-5) with a purity by weight of 95 % or more
0 %
-
31.12.2025
0.7928
ex 2935 90 90
44
4-[2-(7-Methoxy-4,4-dimethyl-1,3-dioxo-3,4-dihydroisoquinolin-2(1H)-yl)ethyl]bezenesulphonamide (CAS RN 33456-68-7) with a purity by weight of 99,5 % or more
0 %
-
31.12.2025
0.7943
ex 3201 90 20
10
Rhus chinensis gall (Galla chinensis) water-based extract, with a tannin content by weight of 85 % or less
0 %
-
31.12.2025
0.7975
ex 3801 10 00
10
Artificial graphite in powder form, (CAS RN 7782-42-5) with:
a secondary particle structure which is aggregated from smaller primary particles,
without coating on the surface,
particle size represented by d50 value of 13,5 μm (± 0,5),
specific surface area (measured by BET) less than 2,0 m2/g,
tap density: 1,10 ~ 1,70 g/cm3,
specific Discharge Capacity of 351,0 mAh/g (± 3,0),
initial efficiency of 94,0 % (± 1,0)
1.8 %
-
31.12.2021
0.7994
ex 3801 10 00
20
Artificial graphite (CAS RN 7782-42-5) powder form, with:
specific surface area (measured by BET) of 0,8 m2/g (± 0,25),
tap density: 0,85 g/cm3 (± 0,10),
particle size represented by d50 value of 21,0 μm (± 2,0),
specific discharge capacity of 351,0 mAh/g (± 3,0),
initial efficiency of 94,0 % (± 2,0)
1.8 %
-
31.12.2021
0.7998
ex 3815 90 90
38
Photoinitiator, containing by weight:
80 % or more of polyethylene glycol di[β-4-[4-(2-dimethylamino-2-benzyl)butanoylphenyl]piperazine]propionate (CAS RN 886463-10-1),
not more than 17 % of polyethylene glycol [β-4-[4-(2-dimethylamino-2-benzyl)butanoylphenyl]piperazine]propionate
0 %
-
31.12.2025
0.7999
ex 3815 90 90
48
Photoinitiator containing by weight:
88 % or more of α-(2-benzoylbenzoyl)-ω-[(2-benzoylbenzoyl)oxy]-poly(oxy-1,2-ethanediyl) (CAS RN 1246194-73-9),
not more than 12 % of α-(2-benzoylbenzoyl)-ω-hydroxy-poly(oxy-1,2-ethanediyl) (CAS RN 1648797-60-7)
0 %
-
31.12.2025
0.7950
ex 3902 90 90
65
Brominated butadiene-styrene copolymer (CAS RN 1195978-93-8) with a bromine content of 60 % by weight or more but not more than 68 %, in forms as defined in Note 6 (b) to Chapter 39
0 %
-
31.12.2025
0.7953
ex 3910 00 00
65
Liquid copolymer based on polydimethylsiloxane with terminal epoxide groups CAS RN 2102536-93-4)
0 %
-
31.12.2025
0.8009
ex 3911 90 99
38
Mixture containing by weight:
90 % (± 1 %) of 1,4:5,8- Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-,polymer with 3a,4,7,7a- tetrahydro- 4,7-methano-1H-indene, hydrogenated (CAS RN 881025-72-5), and
10 % (± 1 %) of a hydrogenated styrene butadiene copolymer (CAS RN 66070-58-4)
0 %
-
31.12.2025
0.8010
ex 3911 90 99
48
Mixture containing by weight:
90 % (± 1 %) of 1,4:5,8-dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-, polymer with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene, hydrogenated (CAS RN 881025-72-5), and
10 % (± 1 %) of an ethylene-propylene copolymer (CAS RN 9010-79-1)
0 %
-
31.12.2025
0.7949
ex 3920 61 00
40
Extruded thermoplastic foils or films of polycarbonate with:
matt surface texture on both sides,
a thickness of more than 50 μm but not more than 200 μm,
a width of 800 mm or more, but not more than 1 500 mm, and
a length of 915 m or more, but not more 2 500 m,
for use in the production of retroreflective products6
0 %
-
31.12.2025
0.8011
ex 3920 62 19
ex 3920 62 90
68
20
Poly(ethylene terephthalate) film in rolls:
with a thickness of 50 μm or more but not more than 350 μm, and
covered with a layer of sputtered precious metal such as gold or palladium with a thickness of 0,02 μm or more but not more than 0,06 μm
0 %
-
31.12.2025
0.8005
ex 3920 99 28
48
Thermoplastic polyurethane foil in rolls, with:
a width of 900 mm or more but not more than 1 016 mm,
a matt finish,
a thickness of 0,4 mm (± 8 %),
an elongation at break of 480 % or more (ASTM D412 (Die C)),
a tensil strength in machine direction of 470 (± 10) kg/cm2 (ASTM D412 (Die C)),
a Shore A hardness of 90 (± 3) (ASTM D2240),
a tear strength of 100 (± 10) kg/cm2 (ASTM D624 (Die C)),
a melting point of 165°C (± 10 °C)
0 %
-
31.12.2025
0.8024
ex 5603 14 10
20
Non-wovens, consisting of poly(ethylene terephthalate) spun bonded media:
of weight of 160 g/m2 or more but not more than 300 g/m2
laminated on one side with a membrane or a membrane and aluminium
with filtration efficiency according to DIN 60335-2-69:2008 minimum Filter class M
pleatable
0 %
m2
31.12.2023
0.8028
ex 6909 19 00
40
Ceramic-carbon absorption cartridges with the following characteristics:
extruded fired ceramic bound multicellular cylindrical structure,
10 % or more by weight but not more than 35 % by weight of activated carbon,
65 % or more by weight but not more than 90 % by weight of ceramic binder,
with a diameter of 29 mm or more but not more than 41 mm,
a length of not more than 150 mm,
fired at temperature of 800 °C or more, and
for vapours adsorption,
of a kind used for assembly in fuel vapours absorbers in fuel systems of motor vehicles
0 %
p/st
31.12.2025
0.7913
ex 7506 20 00
20
Sheets and strips in coils of nickel alloy to standard ASME SB-582/UNS N06030 with:
a thickness of 0,5 mm or more but not more than 3 mm,
a width of 250 mm or more but not more than 1 219 mm
0 %
-
31.12.2025
0.7997
ex 7616 99 90
35
Aluminium plate with:
a length of 36 mm or more but not more than 49 mm,
a width of 29,8 mm or more but not more than 45,2 mm,
a thickness of 0,18 mm or more but not more than 0,66 mm,
equipped with a polypropylene tape with:
a length of 6,5 mm or more but not more than 16,5 mm,
a width of 39 mm or more but not more than 56 mm,
characteristic allowing to create solid joint with Pouch external layer by melting process assuring leak and pressure proof sealing of Cell,
resistance to influence of electrolyte,
for use in the manufacture of lithium-ion battery cells for motor vehicle batteries6
3 %
-
31.12.2021
0.7966
ex 8104 19 00
10
Unwrought magnesium containing 93 % or more but not more than 99,7 % by weight of magnesium
0 %
-
31.12.2025
0.7942
ex 8108 90 30
35
Bars and wires of titanium with a titanium content of 98,8 % or more but not more than 99,9 % of a diameter less than 20 mm
0 %
-
31.12.2025
0.8012
ex 8406 82 00
10
Industrial steam turbine with:
an output of 5 MW or more but not more than 40 MW,
designed for a pressure of not more than 140 bar and a temperature of not more than 540 °C,
equipped with double seat valves on the live steam side which are operated with a hydraulic servo of not more than 12 bar
0 %
-
31.12.2025
0.7961
ex 8409 91 00
ex 8481 90 00
55
60
Nozzle body for the regulation of angle and distribution of fuel injection:
of a cylindrical shape,
made of stainless steel,
with 4 or more, but not more than 16 holes,
with a flow rate of 100 cm3/minute or more, but not more than 500 cm3/minute
0 %
-
31.12.2025
0.7965
ex 8409 91 00
75
Housing of fuel injection valve for generating an electromagnetic field to actuate the injection valve with:
an inlet diameter of 2 mm or more, but not more than 10 mm,
an outlet diameter of 2 mm or more, but not more than 10 mm,
an electric coil with a resistance of 10 Ω or more, but not more than 15 Ω, which ends in an electrical connection,
a plastic covering moulded around a stainless steel tube
0 %
-
31.12.2025
0.7967
ex 8409 91 00
ex 8481 90 00
80
70
Nozzle needle for opening and closing the flow of fuel in the engine, with:
2 holes,
4 grooves,
a diameter of 3 mm or more, but not more than 6 mm,
a length of 25 mm or more, but not more than 35 mm,
made of stainless steel with hard-chrome plating
0 %
-
31.12.2025
0.7969
ex 8413 30 20
40
High-pressure plunger pump for direct diesel injection, with:
an operating pressure of not more than 275 MPa,
a camshaft,
a fluid discharging of 15 cm3 per minute or more, but not more than 1 800 cm3 per minute,
an electric pressure regulating valve
0 %
-
31.12.2025
0.7970
ex 8413 30 20
50
High-pressure plunger pump for direct diesel injection:
with an operating pressure of not more than 275 MPa,
designed to contact the crankshaft,
with an electromagnetic valve
0 %
-
31.12.2025
0.7996
ex 8418 99 90
20
Aluminium connecting block for connecting to a condenser manifold in welding process:
hardened to T6 or T5 temper,
with a weight of not more than 150 g,
with a length of 20 mm or more but not more than 150 mm,
with a fixing rail in one piece
0 %
-
31.12.2025
0.8004
ex 8418 99 90
30
Receiver dryer profile for connecting to a condenser manifold in welding process with:
a braze flatness of not more than 0,2 mm,
a weight of 100 g or more but not more than 600 g,
a fixing rail in one piece
0 %
-
31.12.2025
0.7979
ex 8479 89 97
55
Integrated automated turnkey machinery line for manufacturing jelly rolls of cylindrical lithium ion battery cells by winding, tab assembly and cutting of cathode, separator and anode
0.8 %
-
31.12.2021
0.7982
ex 8479 89 97
65
Integrated automated turnkey machinery line for the assembly of battery cells to cylindrical lithium ion batteries with a speed of 300 parts per minute and production line
0.8 %
-
31.12.2021
0.7964
ex 8479 90 70
40
Housing of the rotor part of the mechanical unit ensuring the adjustment of movement of the camshaft compared to the crankshaft:
of a circular shape,
made of steel alloy with sintering process,
with not more than 8 oil chambers,
with a Rockwell hardness of 55 or more,
with a density of 6,5 g/cm3, or more, but not more than 6,7 g/cm3
0 %
-
31.12.2025
0.7968
ex 8481 30 91
ex 8481 30 99
30
50
Mechanical check (non-return) valve for opening and closing of the flow of fuel:
with an operating pressure of not more than 250 MPa,
with a flow rate of 45 cm3/minute or more, but not more than 55 cm3/minute,
with 4 input holes, each of them with a diameter of 1,2 mm or more, but not more than 1,6 mm,
made of steel
0 %
-
31.12.2025
0.7960
ex 8481 80 59
ex 8481 90 00
70
80
Flow-control valve
made of steel,
with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm,
with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm
0 %
-
31.12.2025
0.7972
ex 8527 29 00
ex 8529 90 65
10
38
Satellite radio receiver module:
with a rectangular shape of dimensions 70,5 x 44,9 x 10,5 mm,
comprising of heat sink and a printed circuit board with resistors, capacitors, transistors, coils, diodes and IC,
being able to process radio frequency signals,
with a medium frequency unit,
for use in the manufacture of products falling under heading 85276
0 %
-
31.12.2025
0.7987
ex 8708 50 20
ex 8708 50 55
15
50
Spherical outboard constant velocity joint ball bearing cage, part of the vehicle’s drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened
0 %
-
31.12.2025
0.7988
ex 8708 50 20
ex 8708 50 99
25
45
Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with:
6 ball tracks or more but not more than 8, with
a thread,
an external involute spline with 21 or more but not more than 38 teeth,
for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %,
forged, turned, milled and hardened
0 %
-
31.12.2025
0.7989
ex 8708 50 20
ex 8708 50 99
35
50
Inboard constant velocity joint tripod housing, with:
an outer diameter of 67,0 mm or more but not more than 99,0 mm,
3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm,
an external spline with 21 teeth or more but not more than 41,
forged, turned, rolled and hardened
0 %
-
31.12.2025
0.7990
ex 8708 50 20
ex 8708 50 99
45
55
Outboard constant velocity joint inner race, part of the vehicle’s drive system, with:
6 or more but not more than 8 ball tracks, suitable for bearing balls with a diameter of 12,0 mm or more but not more than 24,0 mm,
forged, turned, milled, broached and hardened
0 %
-
31.12.2025
0.7991
ex 8708 50 20
ex 8708 50 99
55
60
Inboard constant velocity joint tripod spider, part of the vehicle’s drive system, with:
3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm,
forged, turned, broached and hardened
0 %
-
31.12.2025
0.7973
ex 9002 11 00
23
Lenses with:
motorized focus, zoom, aperture,
electronically switchable infrared cut filter,
an adjustable focal length not less than 2,7 mm and not more than 55 mm,
a weight of not more than 100 g,
a length of less than 70 mm,
a diameter of not more than 60 mm
0 %
-
31.12.2025
Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).’.