- Latest available (Revised)
- Original (As adopted by EU)
Commission Delegated Regulation (EU) 2019/33 of 17 October 2018 supplementing Regulation (EU) No 1308/2013 of the European Parliament and of the Council as regards applications for protection of designations of origin, geographical indications and traditional terms in the wine sector, the objection procedure, restrictions of use, amendments to product specifications, cancellation of protection, and labelling and presentation
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
This is the original version as it was originally adopted in the EU.
This legislation may since have been updated - see the latest available (revised) version
type: a glass bottle consisting of a straight cylindrical body with a long neck, with the following approximate proportions:
total height/diameter at base = 5:1,
height of the cylindrical body = total height/3;
the wines for which this type of bottle is reserved, in the case of wines produced from grapes harvested on French territory, are wines bearing the following protected designations of origin:
‘Alsace’ or ‘vin d'Alsace’, ‘Alsace Grand Cru’,
‘Crépy’,
‘Château-Grillet’,
‘Côtes de Provence’, red and rosé,
‘Cassis’,
‘Jurançon’, ‘Jurançon sec’,
‘Béarn’, ‘Béarn-Bellocq’, rosé,
‘Tavel’, rosé.
However, the restriction on the use of bottles of this type shall apply only to wines produced from grapes harvested on French territory.
type: short-necked glass bottle, pot-bellied but flattened in shape; the base and the cross-section of the bottle at the point of greatest convexity are ellipsoidal:
the ratio between the long and short axes of the ellipsoidal cross-section = 2:1,
the ratio of the height of the convex body to the cylindrical neck of the bottle = 2,5:1;
wines for which this type of bottle is reserved:
German wines bearing the following protected designations of origin:
Franken,
Baden:
originating in Taubertal and Schüpfergrund,
originating in the following parts of the local administrative area of Baden-Baden: Neuweier, Steinbach, Umweg and Varnhalt;
Italian wines bearing the following protected designations of origin:
Santa Maddalena (St. Magdalener),
Valle Isarco (Eisacktaler), made from the Sylvaner and Müller-Thurgau varieties,
Terlaner, made from the Pinot bianco variety,
Bozner Leiten,
Alto Adige (Südtiroler), made from the Riesling, Müller-Thurgau, Pinot nero, Moscato giallo, Sylvaner, Lagrein, Pinot blanco (Weissburgunder) and Moscato rosa (Rosenmuskateller) varieties,
Greco di Bianco,
Trentino, made from the Moscato variety;
Greek wines:
Agioritiko,
Rombola Kephalonias,
wines from the island of Kefalonia,
wines from the island of Paros,
wines bearing a protected geographical indication from Peloponnese;
Portuguese wines:
rosé wines and other wines bearing protected designations of origin and geographical indications which can be proven to have already been correctly and traditionally presented in ‘cantil’-type bottles before they were classified as wines with protected designations of origin and geographical indications.
type: a short-necked glass bottle containing 0,62 litres, consisting of a cylindrical body with broad shoulders, giving the bottle a squat appearance, with approximately the following proportions:
total height/diameter at base = 2,75,
height of the cylindrical part = total height/2;
wines for which this type of bottle is reserved:
French wines bearing the following protected designations of origin:
Côte du Jura,
Arbois,
L'Etoile,
Château Chalon.
type: a straight, long-necked, colourless glass bottle consisting of a cylindrical body with the following proportions:
height of cylindrical body/total height = 1:2,7,
total height/diameter at base = 1:3,6,
capacity: 500 ml; 375 ml, 250 ml, 100 ml or 187,5 ml (in case of exporting to a third country),
a seal made of the material of the bottle referring to the wine region or the producer may be placed on the bottle;
wines for which this type of bottle is reserved:
Hungarian and Slovak wines bearing the following protected designations of origin:
Tokaj,
Vinohradnícka oblasť Tokaj,
supplemented by one of the following protected traditional terms:
aszú/výber,
aszúeszencia/výberová esencia,
eszencia/esencia,
máslas/mášláš,
fordítás/forditáš,
szamorodni/samorodné.
However, the restriction on the use of bottles of this type shall apply only to wines produced from grapes harvested in Hungarian or Slovakian territory.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: