Council Regulation (EU) 2018/2070

of 20 December 2018

amending Regulation (EU) No 1388/2013 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,

Having regard to the proposal from the European Commission,

Whereas:

(1) In order to ensure the sufficient and uninterrupted supply of certain goods insufficiently produced in the Union and to avoid disturbances on the market for certain agricultural and industrial products, autonomous tariff quotas were opened by Council Regulation (EU) No 1388/2013(1). Products within those tariff quotas can be imported into the Union at reduced or zero duty rates.

(2) For those reasons, it is necessary to open, with effect from 1 January 2019, six new tariff quotas with order numbers 09.2600, 09.2617, 09.2720, 09.2738, 09.2740 and 09.2742 at zero duty rates for appropriate volumes of those products. For the two new tariff quotas with order numbers 09.2740 and 09.2742, it is in the interest of the Union to open those tariff quotas only for the purposes of using the products concerned for the manufacture of specific goods produced in the Union. The application of those two tariff quotas should therefore be made conditional on the specific use of the products in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council(2).

(3) In the case of four tariff quotas with order numbers 09.2684, 09.2686, 09.2723 and 09.2864, the quota volumes should be increased, as an increase is in the interest of the Union.

(4) For one tariff quota with order number 09.2850, the classification in the Combined Nomenclature (CN) of the products covered by that tariff quota should be amended.

(5) The classification in the CN of the products currently covered by the tariff quota with order number 09.2844 has been clarified. For the sake of clarity and legal certainty, that tariff quota should be replaced by a new tariff quota with order number 09.2820, indicating the applicable CN code.

(6) In the case of five tariff quotas with order numbers 09.2684, 09.2728, 09.2730, 09.2734 and 09.2736, the quota period should be extended with effect from 1 January 2019, as those tariff quotas were opened for a period of six months only and it is still in the interest of the Union to maintain those tariff quotas.

(7) As the scope of the five tariff quotas with order numbers 09.2620, 09.2668, 09.2736, 09.2850 and 09.2908 has become inadequate to fulfil the needs of the economic operators of the Union, the description of the products covered by those tariff quotas should be amended. For the two tariff quotas with order numbers 09.2668 and 09.2850, it is in the interest of the Union to maintain those tariff quotas only for the purposes of the incorporation of the products concerned into specific goods produced in the Union. The application of those two tariff quotas should therefore be made conditional on the specific use of the products in accordance with Article 254 of Regulation (EU) No 952/2013.

(8) As it is no longer in the interest of the Union to maintain the seven tariff quotas with order numbers 09.2695, 09.2726, 09.2732, 09.2818, 09.2836, 09.2838 and 09.2886, they should be closed with effect from 1 January 2019.

(9) In the interest of clarity, and taking into account the number of amendments to be made, the Annex to Regulation (EU) No 1388/2013 should be replaced.

(10) Regulation (EU) No 1388/2013 should therefore be amended accordingly.

(11) In order to avoid any interruption of the application of the tariff quota scheme and to comply with the guidelines set out in the communication from the Commission concerning autonomous tariff suspensions and quotas(3), the changes provided for in this Regulation regarding the tariff quotas for the products concerned have to apply from 1 January 2019. This Regulation should therefore enter into force as a matter of urgency,

HAS ADOPTED THIS REGULATION:

Article 1U.K.

The Annex to Regulation (EU) No 1388/2013 is replaced by the text set out in the Annex to this Regulation.

Article 2U.K.

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.

It shall apply from 1 January 2019.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 20 December 2018.

For the Council

The President

E. Köstinger

ANNEXU.K.

a

However, the suspension of tariff duties does not apply where the processing is carried out by retail or catering undertakings.

b

Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1)

c

Only the ad valorem duty is suspended. The specific duty shall continue to apply.

Order numberCN codeTARICDescriptionQuota periodQuota volumeQuota duty
09.2637ex 0710 40 0020Corn cobs (Zea Mays Saccharata) whether or not cut, with a diameter of 10 mm or more but not more than 20 mm, for use in the manufacture of products of the food industry for treatment other than simple repackinga b1.1.-31.12.550 tonnes0 %c
ex 2005 80 0030
09.2849ex 0710 80 6910Mushrooms of the species Auricularia polytricha (uncooked or cooked by steaming or boiling), frozen, for the manufacture of prepared mealsa b1.1.-31.12.700 tonnes0 %
09.2664ex 2008 60 3930Sweet cherries containing added spirit, with a sugar content of not more than 9 % by weight, of a diameter of not more than 19,9 mm, with stones, for use in chocolate productsb1.1.-31.12.1 000 tonnes10 %
09.2740ex 2309 90 9697

Soya bean protein concentrate containing by weight:

  • 60 % (± 10 %) of crude protein,

  • 5 % (± 3 %) of crude fibre,

  • 5 % (± 3 %) of crude ash, and

  • 3 % or more but not more than 6,9 % of starch,

for use in the manufacture of animal feed productsb

1.1.-31.12.30 000 tonnes0 %
09.2913ex 2401 10 3591Natural unmanufactured tobacco, whether or not cut in regular size, having a custom value of not less than Euro 450 per 100 kg net weight, for use as binder or wrapper for the manufacture of goods falling within subheading 2402 10 00b1.1.-31.12.6 000 tonnes0 %
ex 2401 10 7010
ex 2401 10 9511
ex 2401 10 9521
ex 2401 10 9591
ex 2401 20 3591
ex 2401 20 7010
ex 2401 20 9511
ex 2401 20 9521
ex 2401 20 9591
09.28282712 20 90Paraffin wax containing by weight less than 0,75 % of oil1.1.-31.12.120 000 tonnes0 %
09.2600ex 2712 90 3910Slack wax (CAS RN 64742-61-6)1.1.-31.12.100 000 tonnes0 %
09.2928ex 2811 22 0040Silica filler in the form of granules, with a purity by weight of 97 % or more of silicon dioxide1.1.-31.12.1 700 tonnes0 %
09.2806ex 2825 90 4030Tungsten trioxide, including blue tungsten oxide (CAS RN 1314-35-8 or CAS RN 39318-18-8)1.1.-31.12.12 000 tonnes0 %
09.2872ex 2833 29 8040Cesium sulphate (CAS RN 10294-54-9) in solid form or as aqueous solution containing by weight 48 % or more but not more than 52 % of cesium sulphate1.1.-31.12.160 tonnes0 %
09.29292903 22 00Trichloroethylene (CAS RN 79-01-6)1.1.-31.12.15 000 tonnes0 %
09.2837ex 2903 79 3020Bromochloromethane (CAS RN 74-97-5)1.1.-31.12.600 tonnes0 %
09.2933ex 2903 99 80301,3-Dichlorobenzene (CAS RN 541-73-1)1.1.-31.12.2 600 tonnes0 %
09.2700ex 2905 12 0010Propan-1-ol (propyl alcohol) (CAS RN 71-23-8)1.1.-31.12.15 000 tonnes0 %
09.2830ex 2906 19 0040Cyclopropylmethanol (CAS RN 2516-33-8)1.1.-31.12.20 tonnes0 %
09.2851ex 2907 12 0010O-Cresol (CAS RN 95-48-7) having a purity of not less than 98,5 % by weight1.1.-31.12.20 000 tonnes0 %
09.2704ex 2909 49 80202,2,2′,2′-Tetrakis(hydroxymethyl)-3,3′-oxydipropan-1-ol (CAS RN 126-58-9)1.1.-31.12.500 tonnes0 %
09.26242912 42 00Ethylvanillin (3-ethoxy-4-hydroxybenzaldehyde) (CAS RN 121-32-4)1.1.-31.12.1 950 tonnes0 %
09.2683ex 2914 19 9050Calcium acetylacetonate (CAS RN 19372-44-2) for use in the manufacture of stabilisator systems in tablet formb1.1.-31.12.150 tonnes0 %
09.2852ex 2914 29 0060Cyclopropyl methyl ketone (CAS RN 765-43-5)1.1.-31.12.300 tonnes0 %
09.2638ex 2915 21 0010Acetic acid (CAS RN 64-19-7) of a purity by weight of 99 % or more1.1.-31.12.1 000 000 tonnes0 %
09.29722915 24 00Acetic anhydride (CAS RN 108-24-7)1.1.-31.12.50 000 tonnes0 %
09.26792915 32 00Vinyl acetate (CAS RN 108-05-4)1.1.-31.12.350 000 tonnes0 %
09.2728ex 2915 90 7085Ethyl trifluoroacetate (CAS RN 383-63-1)1.1.-31.12.400 tonnes0 %
09.2665ex 2916 19 9530Potassium (E,E)-hexa-2,4-dienoate (CAS RN 24634-61-5)1.1.-31.12.8 250 tonnes0 %
09.2684ex 2916 39 90282,5-dimethylphenylacetyl chloride (CAS RN 55312-97-5)1.1.-31.12.400 tonnes0 %
09.2769ex 2917 13 9010Dimethyl sebacate (CAS RN 106-79-6)1.1.-31.12.1 000 tonnes0 %
09.2634ex 2917 19 8040Dodecanedioic acid (CAS RN 693-23-2), of a purity by weight of more than 98,5 %1.1.-31.12.4 600 tonnes0 %
09.2808ex 2918 22 0010O-acetylsalicylic acid (CAS RN 50-78-2)1.1.-31.12.120 tonnes0 %
09.2646ex 2918 29 0075

Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate (CAS RN 2082-79-3) with

  • a sieve passing fraction at a mesh width of 500 μm of more than 99 % by weight, and

  • a melting point of 49 °C or more but not more than 54 °C,

for use in the manufacture of PVC processing stabilizer-one packs based on powder mixtures (powders or press granulates)b

1.1.-31.12.380 tonnes0 %
09.2647ex 2918 29 0080

Pentaerythritol tetrakis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate) (CAS RN 6683-19-8)

  • with a sieve passing fraction at a mesh width of 250 μm of more than 75 % by weight and at a mesh width of 500 μm of more than 99 % by weight, and

  • a melting point of 110 °C or more but not more than 125 °C,

for use in the manufacture of PVC processing stabilizer-one packs based on powder mixtures (powders or press granulates)b

1.1.-31.12.140 tonnes0 %
09.2975ex 2918 30 0010Benzophenone-3,3′,4,4′-tetracarboxylic dianhydride (CAS RN 2421-28-5)1.1.-31.12.1 000 tonnes0 %
09.2688ex 2920 29 0070Tris (2,4-di-tert-butylphenyl)phosphite (CAS RN 31570-04-4)1.1.-31.12.6 000 tonnes0 %
09.2648ex 2920 90 1070Dimethyl Sulphate (CAS RN 77-78-1)1.1.-31.12.18 000 tonnes0 %
09.2649ex 2921 29 0060Bis(2-dimethylaminoethyl)(methyl)amine (CAS RN 3030-47-5)1.1.-31.12.1 700 tonnes0 %
09.2682ex 2921 41 0010Aniline (CAS RN 62-53-3) with a purity by weight of 99 % or more1.1.-31.12.150 000 tonnes0 %
09.2617ex 2921 42 00894-Fluoro-N-(1-methylethyl)benzeneamine (CAS RN 70441-63-3)1.1.-31.12.500 tonnes0 %
09.2602ex 2921 51 1910O-phenylenediamine (CAS RN 95-54-5)1.1.-31.12.1 800 tonnes0 %
09.2730ex 2921 59 90804,4′-Methanediyldianiline (CAS RN 101-77-9) in form of granules, for use in the manufacture of prepolymersb1.1.-31.12.200 tonnes0 %
09.2854ex 2924 19 00853-Iodoprop-2-ynyl N-butylcarbamate (CAS RN 55406-53-6)1.1.-31.12.250 tonnes0 %
09.2874ex 2924 29 7087Paracetamol (INN) (CAS RN 103-90-2)1.1.-31.12.20 000 tonnes0 %
09.2742ex 2926 10 0010Acrylonitrile (CAS RN 107-13-1), for use in the manufacture of goods of chapter 55 and heading 6815b1.1.-31.12.50 000 tonnes0 %
09.2856ex 2926 90 70842-Nitro-4(trifluoromethyl)benzonitrile (CAS RN 778-94-9)1.1.-31.12.900 tonnes0 %
09.2708ex 2928 00 9015Monomethylhydrazine (CAS 60-34-4) in the form of an aqueous solution with a content by weight of monomethylhydrazine of 40 (± 5) %1.1.-31.12.900 tonnes0 %
09.2685ex 2929 90 0030Nitroguanidine (CAS RN 556-88-7)1.1.-31.12.6 500 tonnes0 %
09.28422932 12 002-Furaldehyde (furfuraldehyde)1.1.-31.12.10 000 tonnes0 %
09.2955ex 2932 19 0060Flurtamone (ISO) (CAS RN 96525-23-4)1.1.-31.12.300 tonnes0 %
09.2696ex 2932 20 9025Decan-5-olide (CAS RN 705-86-2)1.1.-31.12.6 000 kilograms0 %
09.2697ex 2932 20 9030Dodecan-5-olide (CAS RN 713-95-1)1.1.-31.12.6 000 kilograms0 %
09.2812ex 2932 20 9077Hexan-6-olide (CAS RN 502-44-3)1.1.-31.12.4 000 tonnes0 %
09.28582932 93 00Piperonal (CAS RN 120-57-0)1.1.-31.12.220 tonnes0 %
09.2878ex 2933 29 9085Enzalutamide INN (CAS RN 915087-33-1)1.1.-31.12.1 000 kilograms0 %
09.2673ex 2933 39 99432,2,6,6-Tetramethylpiperidin-4-ol (CAS RN 2403-88-5)1.1.-31.12.1 000 tonnes0 %
09.2674ex 2933 39 9944Chlorpyrifos (ISO) (CAS RN 2921-88-2)1.1.-31.12.9 000 tonnes0 %
09.2880ex 2933 59 9539Ibrutinib (INN) (CAS RN 936563-96-1)1.1.-31.12.5 tonnes0 %
09.2860ex 2933 69 80301,3,5-Tris[3-(dimethylamino)propyl]hexahydro-1,3,5-triazine (CAS RN 15875-13-5)1.1.-31.12.600 tonnes0 %
09.2658ex 2933 99 80735-(Acetoacetylamino)benzimidazolone (CAS RN 26576-46-5)1.1.-31.12.400 tonnes0 %
09.2675ex 2935 90 90794-[[(2-Methoxybenzoyl)amino]sulfonyl]benzoyl chloride (CAS RN 816431-72-8)1.1.-31.12.1 000 tonnes0 %
09.2710ex 2935 90 90912,4,4-Trimethylpentan-2-aminium (3R,5S,E)-7-(4-(4-fluorophenyl)-6-isopropyl-2-(N-methylmethylsulfonamido)pyrimidin-5-yl)-3,5-dihydroxyhept-6-enoate (CAS RN 917805-85-7)1.1.-31.12.5 000 kilograms0 %
09.2945ex 2940 00 0020D-Xylose (CAS RN 58-86-6)1.1.-31.12.400 tonnes0 %
09.2686ex 3204 11 0075Colourant C.I. Disperse Yellow 54 (CAS RN 7576-65-0) and preparations based thereon with a colourant C.I. Disperse Yellow 54 content of 99 % or more by weight1.1.-31.12.250 tonnes0 %
09.2676ex 3204 17 0014Preparations based on Colourant C.I. Pigment Red 48:2 (CAS RN 7023-61-2) with a content thereof of 60 % or more but less than 85 % by weight1.1.-31.12.50 tonnes0 %
09.2698ex 3204 17 0030Colourant C.I. Pigment Red 4 (CAS RN 2814-77-9) and preparations based thereon with a colourant C.I. Pigment Red 4 content of 60 % or more by weight1.1.-31.12.150 tonnes0 %
09.2659ex 3802 90 0019Soda flux calcinated diatomaceous earth1.1.-31.12.35 000 tonnes0 %
09.2908ex 3804 00 0010Sodium lignosulphonate (CAS RN 8061-51-6)1.1.-31.12.40 000 tonnes0 %
09.28893805 10 90Sulphate turpentine1.1.-31.12.25 000 tonnes0 %
09.2935ex 3806 10 0010Rosin and resin acids obtained from fresh oleoresins1.1.-31.12.280 000 tonnes0 %
09.2832ex 3808 92 9040Preparation containing 38 % or more but not more than 50 % by weight of pyrithione zinc (INN) (CAS RN 13463-41-7) in an aqueous dispersion1.1.-31.12.500 tonnes0 %
09.2876ex 3811 29 0055

Additives consisting of reaction products of diphenylamine and branched nonenes containing by weight:

  • 28 % or more but not more than 55 % of 4-monononyldiphenylamine,

  • 45 % or more but not more than 65 % of 4,4′-dinonyldiphenylamine, and

  • not more than 5 % of 2,4-dinonyldiphenylamine and 2,4′-dinonyldiphenylamine,

for use in the manufacture of lubricating oilsb

1.1.-31.12.900 tonnes0 %
09.2814ex 3815 90 9076Catalyst consisting of titanium dioxide and tungsten trioxide1.1.-31.12.3 000 tonnes0 %
09.2820ex 3824 79 0010

Mixtures containing by weight:

  • 60 % or more but not more than 90 % of 2-chloropropene (CAS RN 557-98-2),

  • 8 % or more but not more than 14 % of (Z)-1-chloropropene (CAS RN 16136-84-8),

  • 5 % or more but not more than 23 % of 2-chloropropane (CAS RN 75-29-6),

  • not more than 6 % of 3-chloropropene (CAS RN 107-05-1), and

  • not more than 1 % of ethyl chloride (CAS RN 75-00-3)

1.1.-31.12.6 000 tonnes0 %
09.2644ex 3824 99 9277

Preparation containing by weight:

  • 55 % or more but not more than 78 % of dimethyl glutarate,

  • 10 % or more but not more than 30 % of dimethyl adipate, and

  • not more than 35 % of dimethyl succinate

1.1.-31.12.10 000 tonnes0 %
09.2681ex 3824 99 9285Mixture of bis [3-(triethoxysilyl)propyl]sulphides (CAS RN 211519-85-6)1.1.-31.12.9 000 tonnes0 %
09.2650ex 3824 99 9287Acetophenone (CAS RN 98-86-2), with a purity by weight of 60 % or more but not more than 90 %1.1.-31.12.2 000 tonnes0 %
09.2888ex 3824 99 9289

Mixture of tertiary alkyldimethyl amines containing by weight:

  • 60 % or more but not more than 80 % of dodecyldimethylamine (CAS RN 112-18-5), and

  • 20 % or more but not more than 30 % of dimethyl(tetradecyl)amine (CAS RN 112-75-4)

1.1.-31.12.16 000 tonnes0 %
09.2829ex 3824 99 9343

Solid extract of the residual, insoluble in aliphatic solvents, obtained during the extraction of rosin from wood, having the following characteristics:

  • a resin acid content not exceeding 30 % by weight,

  • an acid number not exceeding 110, and

  • a melting point of 100 °C or more

1.1.-31.12.1 600 tonnes0 %
09.2907ex 3824 99 9367

Mixture of phytosterols, in the form of powder, containing by weight:

  • 75 % or more of sterols, and

  • not more than 25 % of stanols,

for use in the manufacture of stanols/sterols or stanol/sterol estersb

1.1.-31.12.2 500 tonnes0 %
09.26393905 30 00Poly(vinyl alcohol), whether or not containing unhydrolysed acetate groups1.1.-31.12.15 000 tonnes0 %
09.2671ex 3905 99 9081

Poly(vinyl butyral)(CAS RN 63148-65-2):

  • containing by weight 17,5 % or more but not more than 20 % of hydroxyl groups, and

  • with a median particle size (D50) of more than 0,6 mm

1.1.-31.12.12 500 tonnes0 %
09.2846ex 3907 40 0025Polymer blend of polycarbonate and poly(methyl methacrylate) with a polycarbonate content of not less than 98,5 % by weight, in the form of pellets or granules, with a luminous transmittance of not less than 88,5 %, measured using a test sample with a thickness of 4 mm at a wavelength of λ = 400 nm (according to ISO 13468-2)1.1.-31.12.2 000 tonnes0 %
09.2723ex 3911 90 1910Poly(oxy-1,4-phenylenesulphonyl-1,4-phenyleneoxy-4,4′-biphenylene)1.1.-31.12.5 000 tonnes0 %
09.2816ex 3912 11 0020Cellulose acetate flakes1.1.-31.12.75 000 tonnes0 %
09.2864ex 3913 10 0010Sodium alginate, extracted from brown seaweed (CAS RN 9005-38-3)1.1.-31.12.10 000 tonnes0 %
09.2641ex 3913 90 0087

Sodium hyaluronate, non sterile, with:

  • a weight average molecular weight (Mw) of not more than 900 000,

  • an endotoxin level of not more than 0,008 Endotoxin units (EU)/mg,

  • an ethanol content of not more than 1 % by weight, and

  • an isopropanol content of not more than 0,5 % by weight

1.1.-31.12.200 kilograms0 %
09.2661ex 3920 51 0050

Sheets of polymethylmethacrylate conforming to standards:

  • EN 4364 (MIL-P-5425E) and DTD5592A, or

  • EN 4365 (MIL-P-8184) and DTD5592A

1.1.-31.12.100 tonnes0 %
09.2645ex 3921 14 0020Cellular block of regenerated cellulose, impregnated with water containing magnesium chloride and quaternary ammonium compounds, measuring 100 cm (± 10 cm) × 100 cm (± 10 cm) × 40 cm (± 5 cm)1.1.-31.12.1 700 tonnes0 %
09.2848ex 5505 10 1010Waste of synthetic fibres (including noils, yarn waste, and garnetted stock) of nylon or other polyamides (PA6 and PA66)1.1.-31.12.10 000 tonnes0 %
09.2721ex 5906 99 9020

Woven and laminated rubberised textile fabric with the following characteristics:

  • with three layers,

  • one outer layer consists of acrylic fabric,

  • the other outer layer consists of polyester fabric,

  • the middle layer consists of chlorobutyl rubber,

  • the middle layer has a weight of 452 g/m2 or more but not more than 569 g/m2,

  • the textile fabric has a total weight of 952 g/m2 or more but not more than 1 159 g/m2, and

  • the textile fabric has a total thickness of 0,8 mm or more but not more than 4 mm,

for use in the manufacture of retractable roofs of motor vehiclesb

1.1.-31.12.375 000 square meters0 %
09.2866ex 7019 12 0006

S glass stratifils (rovings):

  • composed of continuous glass filaments of 9 μm (± 0,5 μm),

  • measuring 200 tex or more but not more than 680 tex,

  • not containing any calcium oxide, and

  • with a breaking strength of more than 3 550 MPa determined by ASTM D2343-09,

for use in the manufacture of aeronauticsb

1.1.-31.12.1 000 tonnes0 %
ex 7019 12 0026
09.2870ex 7019 40 0070

E-fibre glass fabrics:

  • having a weight of 20 g/m2 or more but not more than 214 g/m2,

  • impregnated with silane,

  • in rolls,

  • having a humidity content by weight of 0,13 % or less, and

  • having not more than 3 hollow fibres out of 100 000 fibres,

for the exclusive use in the manufacture of prepregs and copper clad laminatesb

1.1.-30.6.3 000 000 meters0 %
ex 7019 52 0030
09.2628ex 7019 52 0010Glass web woven from glass fibre coated in plastic, of a weight of 120 g/m2 (± 10 g/m2), of a type for use in the manufacture of rolling insect screens with fixed frames1.1.-31.12.3 000 000 square meters0 %
09.2799ex 7202 49 9010Ferro-chromium containing 1,5 % or more but not more than 4 % by weight of carbon and not more than 70 % of chromium1.1.-31.12.50 000 tonnes0 %
09.2652ex 7409 11 0020Refined copper foil and strips, electrolytically coated1.1.-31.12.1 020 tonnes0 %
ex 7410 11 0030
09.2734ex 7409 19 0020

Plates or sheets consisting of:

  • a layer of a silicon nitride ceramic with a thickness of 0,32 mm (± 0,1 mm) or more but not more than 1,0 mm (± 0,1 mm),

  • covered on both sides with a foil of refined copper with a thickness of 0,8 mm (± 0,1 mm), and

  • on one side partially covered with a coating of silver

1.1.-31.12.7 000 000 pieces0 %
09.2662ex 7410 21 0055

Plates:

  • consisting of at least one layer of fibreglass fabric impregnated with epoxide resin,

  • covered on one or both sides with copper foil with a thickness of not more than 0,15 mm,

  • with a dielectric constant (DK) of less than 5,4 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2,

  • with a loss tangent of less than 0,035 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2, and

  • with a comparative tracking index (CTI) of 600 or more

1.1.-31.12.80 000 square meters0 %
09.2834ex 7604 29 1020Aluminium alloy rods with a diameter of 200 mm or more but not exceeding 300 mm1.1.-31.12.2 000 tonnes0 %
09.2835ex 7604 29 1030Aluminium alloy rods with a diameter of 300,1 mm or more but not more than 533,4 mm1.1.-31.12.1 000 tonnes0 %
09.2736ex 7607 11 9083

Aluminium and magnesium alloy strip or foil:

  • of an alloy conforming to standards 5182-H19 or 5052-H19,

  • in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,

  • of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,

  • of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm,

  • having a camber tolerance of not more than 0,4 mm/750 mm,

  • of a flatness measurement: I-unit ± 4,

  • having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa, and

  • of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %,

for use in the manufacture of slats for blindsb

1.1.-31.12.600 tonnes0 %
09.2906ex 7609 00 0020Aluminium tube or pipe fittings for affixing to radiators of motor bikesb1.1.-31.12.3 000 000 pieces0 %
09.27228104 11 00Unwrought magnesium, containing at least 99,8 % by weight of magnesium1.1.-31.12.80 000 tonnes0 %
09.2840ex 8104 30 0020

Magnesium powder:

  • of purity by weight of 98 % or more but not more than 99,5 %, and

  • with a particle size of 0,2 mm or more but not more than 0,8 mm

1.1.-31.12.2 000 tonnes0 %
09.2629ex 8302 49 0091Aluminium telescopic handle for use in the manufacture of luggageb1.1.-31.12.1 500 000 pieces0 %
09.2720ex 8413 91 0050

Pump head for two cylinder high pressure pump made of forged steel, with:

  • milled threaded fittings with a diameter of 10 mm or more but not more than 36,8 mm, and

  • drilled fuel channels with a diameter of 3,5 mm or more but not more than 10 mm,

of a kind for use in the manufacture of diesel injection systems

1.1.-31.12.65 000 pieces0 %
09.2850ex 8414 90 0070

Aluminium alloy compressor wheel with:

  • a diameter of 20 mm or more but not more than 130 mm, and

  • a weight of 5 g or more but not more than 800 g,

for use in the assembly of turbochargers without further machiningb

1.1.-31.12.5 900 000 pieces0 %
09.2909ex 8481 80 8540Exhaust valve for use in the manufacture of motorcycle exhaust gas systemsb1.1.-31.12.1 000 000 pieces0 %
09.2738ex 8482 99 0020

Brass cages:

  • continuously or centrifugally cast,

  • turned,

  • containing by weight 35 % or more but not more than 38 % of tin,

  • containing by weight 0,75 % or more but not more than 1,25 % of lead,

  • containing by weight 1,0 % or more but not more than 1,4 % of aluminium, and

  • with a tensile strength of 415 Pa or more,

of a kind for use in the manufacture of ball bearings

35 000 pieces0 %
09.2690ex 8483 30 8020Wave slide bearing for axial applications, of FeP01 steel (according to EN 10130-1991) with a sliding layer of porous sinter bronze and poly(tetrafluoroethylene), suitable for installation into motor bike suspension units1.1.-31.12.1 500 000 pieces0 %
09.2763ex 8501 40 2040Electric AC commutator motor, single-phase, with an output of 250 W or more, an input power of 700 W or more but not more than 2 700 W, an external diameter of more than 120 mm (± 0,2 mm) but not more than 135 mm (± 0,2 mm), a rated speed of more than 30 000 rpm but not more than 50 000 rpm, equipped with air-inducting ventilator, for use in the manufacture of vacuum cleanersb1.1.-31.12.2 000 000 pieces0 %
ex 8501 40 8030
09.2633ex 8504 40 8220Electric rectifier, with a capacity of not more than 1 kVA, for use in the manufacture of appliances falling within subheading 8509 80 and heading 8510b1.1.-31.12.4 500 000 pieces0 %
09.2643ex 8504 40 8230Power supply boards for use in the manufacture of goods falling under heading 8521 and 8528b1.1.-31.12.15 000 000 pieces0 %
09.2620ex 8526 91 2020Assembly for GPS system having a position determination function, without display, and a weight of not more than 2 500 g, whether or not incorporated in a housing1.1.-30.6. 20191 500 000 pieces0 %
09.2672ex 8529 90 9275

Printed circuit board with LED diodes:

  • whether or not equipped with prisms/lens, and

  • whether or not fitted with connector(s),

for use in the manufacture of backlight units for goods of heading 8528b

1.1.-31.12.115 000 000 pieces0 %
ex 9405 40 3970
09.2003ex 8543 70 9063Voltage controlled frequency generator, consisting of active and passive elements mounted on a printed circuit, contained in a housing with dimensions of not more than 30 mm × 30 mm1.1.-31.12.1 400 000 pieces0 %
09.2910ex 8708 99 9775Aluminium alloy support bracket, with mounting holes, whether or not with fixation nuts, for indirect connection of the gearbox to the car body for use in the manufacture of goods of Chapter 87b1.1.-31.12.200 000 pieces0 %
09.2694ex 8714 10 9030Axle clamps, housings, fork bridges and clamping pieces, of aluminium alloy of a kind for use in the manufacture of motor bikes1.1.-31.12.1 000 000 pieces0 %
09.2868ex 8714 10 9060Pistons for suspension systems, having a diameter of not more than 55 mm, of sintered steel1.1.-31.12.2 000 000 pieces0 %
09.2668ex 8714 91 1021Bicycle frame, constructed from carbon fibres and artificial resin, for use in the manufacture of bicycles (including e-bikes)b1.1.-31.12.350 000 pieces0 %
ex 8714 91 1031
ex 8714 91 1075
09.2631ex 9001 90 0080Unmounted glass lenses, prisms and cemented elements for use in the manufacture or repair of goods of CN codes 9002, 9005, 9013 10 and 9015b1.1.-31.12.5 000 000 pieces0 %
09.2932ex 9027 10 9020Lambda sensors for permanent incorporation into motor cycle exhaust systemsb1.1.-31.12.1 000 000 pieces0 %
(2)

Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).