Search Legislation

Commission Implementing Regulation (EU) 2017/78Show full title

Commission Implementing Regulation (EU) 2017/78 of 15 July 2016 establishing administrative provisions for the EC type-approval of motor vehicles with respect to their 112-based eCall in-vehicle systems and uniform conditions for the implementation of Regulation (EU) 2015/758 of the European Parliament and of the Council with regard to the privacy and data protection of users of such systems (Text with EEA relevance)

 Help about what version

What Version

 Help about UK-EU Regulation

Legislation originating from the EU

When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.

Close

This item of legislation originated from the EU

Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).

Status:

This is the original version as it was originally adopted in the EU.
This legislation may since have been updated - see the latest available (revised) version

ANNEX II Administrative documents for EC type-approval of 112-based eCall in-vehicle STU or 112-based eCall in-vehicle system component

PART 1 Information document

MODEL

Information document No … relating to the EC type-approval of a 112-based eCall in-vehicle STU or 112-based eCall in-vehicle system component (3).

The following information shall be supplied in triplicate and include a list of contents. Any drawings shall be supplied in appropriate scale and in sufficient detail on size A4 or on a folder of A4 format. Photographs, if any, shall show sufficient detail.

If the separate technical unit or component referred to in this information document have electronic controls, information concerning their performance shall be supplied.

0.GENERAL

0.1.Make (trade name of manufacturer): …
0.2.Type: …
0.3.Means of identification of type, if marked on the Separate Technical Unit (1): …
0.3.1.Location of that marking: …
0.4.In case of STU, intended for category of vehicle (2): …
0.5.Company name and address of manufacturer: …
0.7.Location and method of affixing of the EC approval mark: …
0.9.Name and address of the manufacturer's representative (if any): …
12.8.eCall system
12.8.2.Technical description and/or schematic drawings: …
12.8.3.1.Photographs and/or drawings in sufficient detail and to an appropriate scale to enable the STU or component to be identified. The drawings must show the intended position of the STU or component on the vehicle and the space intended for the EC type-approval mark of the STU or component: …
12.8.3.1.1.Instructions for installation in the vehicle, including the position and orientation of the 112-based eCall in-vehicle system component: …
12.8.3.1.2.Location and method of mounting the 112-based eCall in-vehicle STU in the vehicle: …
12.8.3.2.List of the main constituent parts of the STU or component: …
12.8.7.Declaration of conformity with the standards referred to in Article 5(8) of Regulation (EU) 2015/758: yes/no (3).

Explanatory notes

(1)If the means of identification of type contains characters not relevant to describe the vehicle, component or separate technical unit types covered by this information document, such characters shall be represented in the documentation by the symbol ‘?’ (e.g. ABC??123??).

(2)As defined in Section A of Annex II to Directive 2007/46/EC.

(3)Delete where not applicable.

PART 2 EC type-approval certificate

MODEL Format A4 (210 × 297 mm)

EC TYPE-APPROVAL CERTIFICATE

Stamp of type-approval authority

Communication concerning:

a

Delete where not applicable.

  • EC type-approvala

  • extension of EC type-approvala

  • refusal of EC type-approvala

  • withdrawal of EC type-approvala

of 112-based eCall in-vehicle STU/ 112-based eCall in-vehicle system componenta

with regard to Regulation (EU) 2015/758.

EC type-approval number: …

Reason for extension: …

SECTION I

0.1.Make (trade name of manufacturer): …
0.2.Type: …
0.3.Means of identification of type if marked on the separate technical unit/component(1): …
0.3.1.Location of that marking: …
0.4.In case of separate technical unit, intended for category of vehicle (3): …
0.5.Name and address of manufacturer: …
0.7.Location and method of affixing of the EC approval mark: …
0.9.Name and address of the manufacturer's representative (if any): …

SECTION II

1.Additional information (where applicable): see Addendum
2.Technical service responsible for carrying out the tests: …
3.Date of test report: …
4.Number of test report: …
5.Remarks (if any): see Addendum.
6.Place: …
7.Date: …
8.Signature: …
Attachments:
1.

Information package.

2.

Test report.

Addendum to EC type-approval certificate No …

1.Additional information

1.1.Brief description of the 112-based eCall in-vehicle STU/112-based eCall in-vehicle system component(2): …
1.1.1.Instructions for installation in the vehicle, including the position and orientation of the 112-based eCall in-vehicle system component: …
1.1.2.Example of the EC type-approval marking on the 112-based eCall in-vehicle STU/112-based eCall in-vehicle system component(2): …
1.2.Location and method of mounting of the eCall separate technical unit in the vehicle: …
1.3.Means of triggering: …
1.4.Power supply: …

2.The 112-based eCall in-vehicle system component complies with the technical requirements set out in Annex I to Commission Delegated Regulation (EU) 2017/79. In addition, it also complies with the technical requirements covered by:

2.1.Annex IV to Delegated Regulation (EU) 2017/79: yes/no(2).
2.2.Annex VI to Delegated Regulation (EU) 2017/79: yes/no(2).
2.3.Annex VII to Delegated Regulation (EU) 2017/79: yes/no(2).

3.Remarks (if any): …

PART 3 EC type-approval mark for STUs and components

1.The EC component and separate technical unit type-approval mark shall consist of:

1.1.A rectangle surrounding the lower-case letter ‘e’ followed by the distinguishing number of the Member State which has granted the EC component or separate technical unit type-approval:

1for Germany12for Austria26for Slovenia
2for France13for Luxembourg27for Slovakia
3for Italy17for Finland29for Estonia
4for the Netherlands18for Denmark32for Latvia
5for Sweden19for Romania34For Bulgaria
6for Belgium20for Poland36For Lithuania
7for Hungary21for Portugal49For Cyprus
8for the Czech Republic23for Greece50For Malta
9for Spain24for Ireland
11for the United Kingdom25for Croatia

1.2.In the vicinity of the rectangle the ‘base approval number’ contained in Section 4 of the type-approval number preceded by the two figures indicating the sequence number assigned to this Regulation. The sequence number is ‘00’ at present.

1.3.In case of a 112-based eCall in-vehicle STU, in the vicinity of the rectangle the sequence number shall be preceded by the symbol ‘ECALL’.

2.The EC type-approval mark is affixed to a main part of the 112-based eCall in-vehicle STU or 112-based eCall in-vehicle system component in such a way as to be indelible as well as clearly and easily legible.

3.Example of EC type-approval marks for 112-based eCall in-vehicle STUs and 112-based eCall in-vehicle system components is shown respectively in Figure 1 and Figure 2.

Figure 1

Example of EC type-approval mark for 112-based eCall in-vehicle STUs

Explanatory note

Legend

The EC separate technical unit type-approval was issued by Bulgaria under number 0046. The first two digits ‘00’ indicate that the separate technical unit was approved according to this Regulation.

Figure 2

Example of EC type-approval mark for 112-based eCall in-vehicle system components

Explanatory note

Legend

The EC component type-approval was issued by Germany under number 00026. The first two digits ‘00’ indicate that the component was approved according to this Regulation.

(1)

If the means of identification of type contains characters not relevant to describe the vehicle, component or separate technical unit types covered by this information document, such characters shall be represented in the documentation by the symbol ‘?’ (e.g. ABC??123??).

(2)

Delete where not applicable.

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the EU Official Journal
  • lists of changes made by and/or affecting this legislation item
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources