Commission Regulation (EC) No 692/2008 of 18 July 2008 implementing and amending Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information (Text with EEA relevance) (c. 692)

ANNEX IV U.K. EMISSIONS DATA REQUIRED AT TYPE-APPROVAL FOR ROADWORTHINESS PURPOSES

Appendix 2 MEASUREMENT OF SMOKE OPACITY

4. TECHNICAL REQUIREMENTS U.K.

4.1. The technical requirements shall be those set out in Annexes 4, 5, 7, 8, 9 and 10 to UN/ECE Regulation No 24, with the exceptions set out in sections 4.2., 4.3 and 4.4. U.K.

4.2. Test at steady speeds over the full load curve U.K.

4.2.1. The references to Annex 1 in paragraph 3.1. of Annex 4 of UN/ECE Regulation No 24 shall be understood as references to Appendix 3 to Annex I to this Regulation. U.K.

4.2.2. The reference fuel specified in paragraph 3.2 of Annex 4 of UN/ECE Regulation No 24 shall be understood as reference to the reference fuel in Annex IX to this Regulation appropriate to the emission limits against which the vehicle is being type approved. U.K.

4.3. Test under free acceleration U.K.

4.3.1. The references to Table 2, Annex 2 in paragraph 2.2 of Annex 5 to UN/ECE Regulation No 24 shall be understood as references to the table under point 2.4.2.1 of Appendix 4 to Annex I to this Regulation. U.K.

4.3.2. The references to paragraph 7.3 of Annex 1 in paragraph 2.3 of Annex 5 to UN/ECE Regulation No 24 shall be understood as references to Appendix 3 to Annex I to this Regulation. U.K.

4.4. ‘ECE’ method of measuring the net power of C.I. engines U.K.

4.4.1. The references in paragraph 7 of Annex 10 to UN/ECE Regulation No 24 to the ‘Appendix to this Annex’ and in paragraphs 7 and 8 of Annex 10 to UN/ECE Regulation No 24 to ‘Annex 1’ shall be understood as references to Appendix 3 to Annex I to this Regulation. U.K.