Commission Regulation (EC) No 692/2008 of 18 July 2008 implementing and amending Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information (Text with EEA relevance) (c. 692)

[F1 ANNEX IIIA U.K. VERIFYING REAL DRIVING EMISSIONS

Textual Amendments

F1 Inserted by Commission Regulation (EU) 2016/427 of 10 March 2016 amending Regulation (EC) No 692/2008 as regards emissions from light passenger and commercial vehicles (Euro 6) (Text with EEA relevance).

Appendix 1

Test procedure for vehicle emissions testing with a Portable Emissions Measurement System (PEMS) U.K.

3. GENERAL REQUIREMENTS U.K.

3.1. PEMS U.K.

The test shall be carried out with a PEMS, composed of components specified in points 3.1.1 to 3.1.5. If applicable, a connection with the vehicle ECU may be established to determine relevant engine and vehicle parameters as specified in point 3.2.

3.1.1. Analysers to determine the concentration of pollutants in the exhaust gas. U.K.

3.1.2. One or multiple instruments or sensors to measure or determine the exhaust mass flow. U.K.

3.1.3. A Global Positioning System to determine the position, altitude and, speed of the vehicle. U.K.

3.1.4. If applicable, sensors and other appliances being not part of the vehicle, e.g. to measure ambient temperature, relative humidity, air pressure, and vehicle speed. U.K.

3.1.5. An energy source independent of the vehicle to power the PEMS.] U.K.