1

1.1.

switch on, adjust and control the functioning of navigational radar installations;

2

1.1.

switch on, adjust and control the functioning of rate-of-turn indicator;

3

1.1.

interpret the radar display correctly by setting the range, resolution, brightness, gain, contrast, other connected apparatus, centre and tune;

4

1.1.

use the rate-of-turn indicator e.g. by setting the rate-of-turn in accordance with maximum rate-of-turn of the craft;

5

2.1

identify the position of the antenna on the screen and the heading line, the setting of position, course and turning direction of the own craft and the determining distances and reach;

6

2.1

interpret the behaviour of other traffic participants (stationary craft, oncoming craft and craft heading the same direction);

7

2.2

analyse the information supplied by radar such as heading line, electronic bearing line, range rings, and variable range marker, target trails, decentring and parallel lines and to explain the radar picture;

8

3.1

reduce disturbances coming from the own craft by checking antenna, by reducing shadows and multiple reflections e. g. in the area of holds;

9

3.2

take action to reduce disturbances from the environment by reducing influence from rain and waves, by correctly dealing with scattered fields (e.g. from bridges), false/ghost echoes from power transmission lines and cables as well as with shadowing and multipath effects;

10

3.3

remove disturbances coming from other navigational radar installations by using interference rejection;

11

4.1.

correctly attribute tasks to deck crew members;

12

4.1.

ensure cooperation between the person at helm and the person using navigational radar installations according to visibility and the features of the wheelhouse;

13

4.1

use rate-of-turn indicators and inland ECDIS or similar displays in combination with radar;

14

4.1.

act according to police regulations in case of reduced visibility and in case of good visibility;

15

4.1.

use radio, sound signals and to agree on course by using information supplied by radar;

16

4.1.

give commands to the person at helm including checking the person’s required knowledge and skills

17

5.1

take appropriate measures in high traffic density;

18

5.1.

take appropriate measures in the case of failure of devices;

19

5.1.

react appropriately in unclear or dangerous traffic situations.

1

1.1.

demonstrate the use of lifebuoys for passengers;

I

2

1.1.

demonstrate the use of lifejackets for passengers and deck crew members and shipboard personnel including specific individual life-saving equipment for persons not undertaking duties for the safety rota;

I

3

1.1.

demonstrate the use of appropriate equipment for evacuation to shallow water, to the bank or to another craft;

I

4

1.1.

demonstrate the use of ship’s boats including its engine and searchlight or platform according to Article 19.15 ES-TRIN 2017/1 replacing the ship’s boat or collective life-saving appliances according to Article 19.09(5) to (7) ES-TRIN 2017/1;

I

5

1.1.

demonstrate the use of suitable stretcher;

I

6

1.1.

demonstrate the use of first aid kits;

I

7

1.1.

demonstrate the use of self-contained breathing apparatus sets and sets of equipment as well as smoke hoods according to Article 19.12(10) ES-TRIN 2017/1 or a combination thereof;

I

8

2.1.

check and monitor inspection intervals for the equipment mentioned in No 1-7 of this table;

II

9

2.1.

check and monitor the necessary qualification of persons using first aid kits and self-contained breathing apparatus sets and sets of equipment as well as smoke hoods;

II

10

2.1.

stow appropriately and distribute life-saving appliances;

I

11

2.3.

identify areas accessible for passengers with reduced mobility;

II

12

1.1.

demonstrate the use of life-saving equipment for passengers with reduced mobility;

I

13

2.1

explain elements of the safety rota and the safety plan;

II

14

2.1.

attribute tasks to shipboard personnel according to safety rota and safety plan;

II

15

2.3

attribute tasks to shipboard personnel with regard to non-discriminatory access and safety rota planning for passengers with reduced mobility;

II

16

2.3

organise training and instructions for persons with reduced mobility according to Annex IV to Regulation (EU) No 1177/2010;

I

17

2.2

organise the evacuation of a passenger area explaining specific measures to take in case of collision, running aground, smoke and fire;

I

18

2.2.

fight incipient fire and handle waterproof and fire-retardant doors;

I

19

2.2.

provide necessary information to the boatmaster, passengers and external rescue forces in a simulated emergency;

II

20

3.1

use elementary English vocabulary and pronounce wording suited to guide passengers and shipboard personnel in standard situations and to alert and guide them in the event of emergencies;

I

21

4.1

explain which passenger rights are applicable;

I

22

4.1

implement applicable procedures to provide access and professional assistance to passengers according to Regulation (EU) No 1177/2010.

II

1

1.1

instruct and monitor crew member operations in order to ensure compliance with legislation and standards applicable to craft using LNG as a fuel on board the craft and in particular with the bunkering procedure;

II

2

1.2

instruct and monitor crew member operations in order to ensure compliance with other relevant health and safety regulations;

II

3

2.2

conduct risk management, to document on-board safety (including safety plan and safety instructions), to assess and control dangerous areas, fire safety and to use personal protective equipment;

II

4

3.1

present the mode of action of LNG;

II

5

3.1

read pressure and temperature, operate stripping, containment, pipe, gas supply, ventilation, safety systems, valves and to manage boil-off of LNG;

I

6

4.1

perform daily, weekly and regular periodic maintenance,

I

7

4.1

correct malfunctions detected during maintenance;

I

8

4.1

document maintenance work;

II

9

5.1

start and monitor bunkering procedures including measures to guarantee safe mooring, correct position of cables and pipes in order to avoid leakage, and to take measures to safely disconnect LNG and bunkering connection if needed at any time;

I

10

5.1

ensure compliance with relevant safety zone regulations;

II

11

5.1

report start of bunkering procedure;

II

12

5.1

perform safe bunkering according to manual, including ability to monitor pressure, temperature and LNG level in tanks;

I

13

5.1

purge pipe systems, to close valves and disconnect craft from bunkering installation and to report end of procedure after bunkering;

I

14

6.1

perform

• inerting of the LNG system,

• LNG fuel tank drainage procedure,

• first filling of LNG fuel tank (drying and cooldown),

• entry into service following a shipyard stay;

I

15

7.1

react appropriately in case of emergencies such as

1. ☐

   on-deck LNG spills,

2. ☐

   skin contact with LNG,

3. ☐

   LNG spills in closed spaces (e.g. in engine rooms),

4. ☐

   LNG spills or natural gas leaks in inter-barrier spaces (e.g. double- walled fuel tanks, double-walled pipes);

I

16

7.1

react appropriately in case of fire in the vicinity of LNG fuel tanks or in the engine rooms;

I

17

7.1

react appropriately in case of pressure built up in pipe systems after emergency shut down activation in case of imminent release or venting;

I

18

7.1

take emergency measures and remote surveillance emergency measures, e.g. to properly control LNG fire, pool, jet and flash fire.

I

1

0.1.1

use materials available on board such as winches, bollards, ropes and wires considering relevant work safety measures including the use of personal protective and rescue equipment;

I

2

0.1.2

connect and disconnect push/barge combinations using the required equipment and materials;

I

3

0.1.2

use equipment and materials available on board for coupling operations considering relevant work safety measures including the use of personal protective and rescue equipment;

I

4

0.1.3

demonstrate anchor manoeuvres;

I

5

0.1.3

use equipment and materials available on board for anchoring operations considering relevant work safety measures including the use of personal protective and rescue equipment;

I

6

0.1.4

secure the watertightness of the craft;

I

7

0.1.4

work according to the checklist on deck and in the living quarters such as waterproofing and securing of the hatches and holds;

I

8

0.1.5

explain and demonstrate the applicable procedures to deck crew member while passing locks, weirs and bridges;

II

9

0.1.6

handle and maintain the craft’s day and night marking system, signs and sound signals;

I

10

0.3.3

use methods to determine the amount of cargo loaded or discharged;

II

11

0.3.3

calculate the amount of liquid cargo using the soundings or tank tables, or both;

II

12

0.4.1

operate and control the machinery in the engine room following procedures;

I

13

0.4.1

explain safe function, operation and maintenance of the bilge and ballast system including: reporting incidents associated with transfer operations and ability to correctly measure and report tank levels;

II

14

0.4.1

prepare and operate shut-off-operations of the engines after operation;

I

15

0.4.1

operate pumping bilge, ballast and cargo pumping systems;

I

16

0.4.1

use hydraulic and pneumatic systems;

I

17

0.4.2

use switchboard;

I

18

0.4.2

use shore supply;

I

19

0.4.3

apply safe working procedures in maintenance and repair of engines and equipment;

I

20

0.4.5

maintain and to take care of pumps, piping systems, bilge- and ballast systems;

II

21

0.5.1

clean all accommodation spaces, the wheelhouse and keeping the household in a proper way complying with the rules of hygiene including responsibility for their own accommodation space;

II

22

0.5.1

clean the engine rooms and engines using the appropriate cleansing materials;

I

23

0.5.1

clean and to preserve the outer parts, the hull and the decks of the craft in the correct order using the appropriate materials according to environmental rules;

II

24

0.5.1

take care of the craft and household waste disposal according to environmental rules;

II

25

0.5.2

maintain and take care of all technical equipment according to technical instructions and use maintenance programmes (including digital);

I

26

0.5.3

use and store ropes and wires according to safe working practices and rules;

II

27

0.5.4

splice wires and ropes, apply knots according to their use and maintain wires and ropes;

I

28

0.6.1

use required technical and nautical terms as well as terms related to social aspects in standardised communication phrases;

I

29

0.7.1

prevent dangers related to on board hazards;

I

30

0.7.1

prevent activities which might be hazardous to personnel or craft;

I

31

0.7.2

use personal protective equipment;

I

32

0.7.3

use swimming skills for rescue operations;

II

33

0.7.3

use rescue equipment in the case of rescue operations and rescue and transport a casualty;

II

34

0.7.4

keep escape routes free;

II

35

0.7.5

use emergency communication and alarm systems and equipment;

I

36

0.7.6, 0.7.7

apply various methods of firefighting and extinguish equipment and fixed installations;

I

37

0.7.8

perform medical first aid.

I