Commission Implementing Directive (EU) 2019/69Show full title

Commission Implementing Directive (EU) 2019/69 of 16 January 2019 laying down technical specifications for alarm and signal weapons under Council Directive 91/477/EEC on control of the acquisition and possession of weapons (Text with EEA relevance)

9.All barriers are permanent and incapable of being knocked out without destroying the chamber or barrel of the device.U.K.

For devices designed to fire only blanks, the barriers are wholly made of a material which is resistant to being cut, drilled, bored or ground (or any similar process) and which has a minimum hardness of 700 HV 30 (according to the Vickers hardness test).

For devices not covered by the second subparagraph of this point, the barriers are made of a material which is resistant to being cut, drilled, bored or ground (or any similar process) and which has a minimum hardness of 610 HV 30. The barrel may have a channel along its axis to enable the irritants or other active substances to be expelled from the device.

In either case, the barriers are such that they prevent occurrence of the following:

(a)

creation or enlargement of a hole in the barrel along its axis;

(b)

removal of the barrel, except where the frame and chamber area of the device is rendered useless as a result of the removal, or where the integrity of the device is so compromised that it cannot be used to form the basis of a firearm without significant repair or addition.