Please note that the date you requested in the address for this web page is not an actual date upon which a change occurred to this item of legislation. You are being shown the legislation from , which is the first date before then upon which a change was made.
1.Without prejudice to Article 37, where a Member State makes one of the following findings, it shall require the relevant economic operator to put an end to the non-compliance concerned:
(a)the CE marking or the supplementary metrology marking has been affixed in violation of Article 30 of Regulation (EC) No 765/2008 or of Article 17 of this Directive;
(b)the CE marking or the supplementary metrology marking has not been affixed;
(c)the inscriptions provided for in Article 6(5) have not been affixed or have been affixed in violation of Article 6(5);
(d)the identification number of the notified body, where that body is involved in the production control phase, has been affixed in violation of Article 17 or has not been affixed;
(e)the EU declaration of conformity has not been drawn up;
(f)the EU declaration of conformity has not been drawn up correctly;
(g)technical documentation is either not available or not complete;
(h)the information referred to in Article 6(6) or 8(3) is absent, false or incomplete;
(i)any other administrative requirement provided for in Article 6 or 8 is not fulfilled.
2.Where the non-compliance referred to in paragraph 1 persists, the Member State concerned shall take all appropriate measures to restrict or prohibit the instrument being made available on the market or ensure that it is recalled or withdrawn from the market.