Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast) (Text with EEA relevance) (c. 30)

CHAPTER 1 U.K. GENERAL PROVISIONS

Article 3 U.K. Definitions

1. For the purposes of this Directive, the following definitions shall apply:

(1)

‘equipment’ means any apparatus or fixed installation;

(2)

‘apparatus’ means any finished appliance or combination thereof made available on the market as a single functional unit, intended for the end-user and liable to generate electromagnetic disturbance, or the performance of which is liable to be affected by such disturbance;

(3)

‘fixed installation’ means a particular combination of several types of apparatus and, where applicable, other devices, which are assembled, installed and intended to be used permanently at a predefined location;

(4)

‘electromagnetic compatibility’ means the ability of equipment to function satisfactorily in its electromagnetic environment without introducing intolerable electromagnetic disturbances to other equipment in that environment;

(5)

‘electromagnetic disturbance’ means any electromagnetic phenomenon which may degrade the performance of equipment; an electromagnetic disturbance may be electromagnetic noise, an unwanted signal or a change in the propagation medium itself;

(6)

‘immunity’ means the ability of equipment to perform as intended without degradation in the presence of an electromagnetic disturbance;

(7)

‘safety purposes’ means the purposes of safeguarding human life or property;

(8)

‘electromagnetic environment’ means all electromagnetic phenomena observable in a given location;

(9)

‘making available on the market’ means any supply of apparatus for distribution, consumption or use on the Union market in the course of a commercial activity, whether in return for payment or free of charge;

(10)

‘placing on the market’ means the first making available of apparatus on the Union market;

(11)

‘manufacturer’ means any natural or legal person who manufactures apparatus or has apparatus designed or manufactured, and markets that apparatus under his name or trade mark;

(12)

‘authorised representative’ means any natural or legal person established within the Union who has received a written mandate from a manufacturer to act on his behalf in relation to specified tasks;

(13)

‘importer’ means any natural or legal person established within the Union who places apparatus from a third country on the Union market;

(14)

‘distributor’ means any natural or legal person in the supply chain, other than the manufacturer or the importer, who makes apparatus available on the market;

(15)

‘economic operators’ means the manufacturer, the authorised representative, the importer and the distributor;

(16)

‘technical specification’ means a document that prescribes technical requirements to be fulfilled by the equipment;

(17)

‘harmonised standard’ means harmonised standard as defined in point (c) of point 1 of Article 2 of Regulation (EU) No 1025/2012;

(18)

‘accreditation’ means accreditation as defined in point 10 of Article 2 of Regulation (EC) No 765/2008;

(19)

‘national accreditation body’ means national accreditation body as defined in point 11 of Article 2 of Regulation (EC) No 765/2008;

(20)

‘conformity assessment’ means the process demonstrating whether the essential requirements of this Directive relating to an apparatus have been fulfilled;

(21)

‘conformity assessment body’ means a body that performs conformity assessment activities including calibration, testing, certification and inspection;

(22)

‘recall’ means any measure aimed at achieving the return of apparatus that has already been made available to the end-user;

(23)

‘withdrawal’ means any measure aimed at preventing apparatus in the supply chain from being made available on the market;

(24)

‘Union harmonisation legislation’ means any Union legislation harmonising the conditions for the marketing of products;

(25)

‘CE marking’ means a marking by which the manufacturer indicates that the apparatus is in conformity with the applicable requirements set out in Union harmonisation legislation providing for its affixing.

2. For the purposes of this Directive, the following shall be considered as apparatus:

(1)

‘components’ or ‘sub-assemblies’ intended for incorporation into an apparatus by the end-user, which are liable to generate electromagnetic disturbance, or the performance of which is liable to be affected by such disturbance;

(2)

‘mobile installations’ defined as a combination of apparatus and, where applicable, other devices, intended to be moved and operated in a range of locations.