- Latest available (Revised)
- Original (As adopted by EU)
Directive 2010/35/EU of the European Parliament and of the Council of 16 June 2010 on transportable pressure equipment and repealing Council Directives 76/767/EEC, 84/525/EEC, 84/526/EEC, 84/527/EEC and 1999/36/EC (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
This is the original version (as it was originally adopted).
1.The Pi marking shall only be affixed by the manufacturer or, in cases of reassessment of conformity, as set out in Annex III. For gas cylinders previously in compliance with Directives 84/525/EEC, 84/526/EEC or 84/527/EEC the Pi mark shall be affixed by or under the surveillance of the notified body.
2.The Pi marking shall be affixed only to transportable pressure equipment which:
(a)meets the conformity assessment requirements in the Annexes to Directive 2008/68/EC and in this Directive; or
(b)meets the reassessment of conformity requirements referred to in Article 13.
It shall not be affixed to any other transportable pressure equipment.
3.By affixing or having affixed the Pi marking, the manufacturer indicates that he takes responsibility for the conformity of the transportable pressure equipment with all applicable requirements set out in the Annexes to Directive 2008/68/EC and in this Directive.
4.For the purposes of this Directive, the Pi marking shall be the only marking which attests conformity of the transportable pressure equipment with the applicable requirements set out in the Annexes to Directive 2008/68/EC and in this Directive.
5.The affixing on transportable pressure equipment of markings, signs and inscriptions which are likely to mislead third parties as to the meaning or form of the Pi marking, shall be prohibited. Any other marking shall be affixed to the transportable pressure equipment in such a way that the visibility, legibility and meaning of the Pi marking are not thereby impaired.
6.Demountable parts of refillable transportable pressure equipment with a direct safety function shall be Pi-marked.
7.Member States shall ensure correct implementation of the rules governing the Pi marking and shall take appropriate action in the event of improper use of the marking. Member States shall also provide for penalties for infringements, which may include criminal sanctions for serious infringements. Those penalties shall be proportionate to the seriousness of the offence and constitute an effective deterrent against improper use.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: