Commission Directive 2008/74/EC of 18 July 2008 amending, as regards the type approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and access to vehicle repair and maintenance information, Directive 2005/55/EC of the European Parliament and of the Council and Directive 2005/78/EC (Text with EEA relevance) (c. 74)

ANNEX I U.K. Amendments to Directive 2005/55/EC

2. Annex II is amended as follows: U.K.

(a)

In Appendix 1, the following points 8.4, 8.4.1, 8.4.1.1 and 8.4.1.2 are added:

‘8.4. Engine performances (for measurement of smoke opacity)

8.4.1. Power at the six points of measurement referred to in paragraph 2 of Annex 4 of UN/ECE Regulation 24.

8.4.1.1. Power of the engine measured on the test bench: …

8.4.1.2 Power measured on the wheels of the vehicle: …

Engine speed (min–1)	Measured power (kW)
1. …	…
2. …	…
3. …	…
4. …	…
5. …	…
6. …	…’

(b)

The following Appendix 6 is added:

‘Appendix 6 Information required for roadworthiness testing

A. Measurement of carbon monoxide emissions(1) U.K.

3.2.1.6. Normal engine idling speed (including tolerance) … min^-1 U.K.

3.2.1.6.1. High engine idling speed (including tolerance) … min^-1 U.K.

3.2.1.7. Carbon monoxide content by volume in the exhaust gas with the engine idling(2) … % as stated by the manufacturer (positive ignition engines only) U.K.

B. Measurement of smoke opacity U.K.

3.2.13. Location of the absorption coefficient symbol (compression ignition engines only): … U.K.

4. TRANSMISSION (v) U.K.

4.3. Moment of inertia of engine flywheel: … U.K.

4.3.1. Additional moment of inertia with no gear engaged: …” U.K.

(1)

Numbering of the information document is consistent with the numbering used in the Type Approval Framework Directive (2008/74/EC).

(2)

Specify the tolerance.’