Directive 2007/46/EC of the European Parliament and of the Council (repealed)Show full title

B: For category O

0. GENERAL

0.1. Make (trade name of manufacturer):

0.2.

Type:

0.2.1. Commercial name(s) (if available):

0.3.

Means of identification of type, if marked on the vehicle (^b):

0.3.1. Location of that marking:

0.4.

Category of vehicle (^c):

0.4.1. Classification(s) according to the dangerous goods which the vehicle is intended to transport:

0.5. Name and address of manufacturer:

0.8. Address(es) of assembly plant(s):

0.9. Name and address of the manufacturer’s representative (if any): …

1. GENERAL CONSTRUCTION CHARACTERISTICS OF THE VEHICLE

1.1. Photographs and/or drawings of a representative vehicle:

1.3.

Number of axles and wheels:

1.3.2. Number and position of steered axles:

1.4. Chassis (if any) (overall drawing):

2. MASSES AND DIMENSIONS (^e) (in kg and mm)

(Refer to drawing where applicable)

2.1. Wheelbase(s) (fully loaded) (^f):

2.3.1. Track of each steered axle (ⁱ):

2.3.2. Track of all other axles (ⁱ):

2.4.

Range of vehicle dimensions (overall)

2.4.2.

For chassis with bodywork

2.4.2.1.

Length (^j):

2.4.2.1.1. Length of the loading area:

2.4.2.2.

Width (^k):

2.4.2.2.1. Thickness of the walls (in the case of vehicles designed for controlled-temperature transport of goods):

2.4.2.3. Height (in running order) (^l) (for suspension adjustable for height, indicate normal running position):

2.6.

Mass of the vehicle with bodywork and, in the case of a towing vehicle of a category other than M₁, with coupling device, if fitted by the manufacturer, in running order, or mass of the chassis or chassis with cab, without bodywork and/or coupling device if the manufacturer does not fit the bodywork and/or coupling device (including liquids, tools, spare wheel, if fitted, and driver and, for buses and coaches, a crew member if there is a crew seat in the vehicle) (^o) (maximum and minimum for each variant):

2.6.1. Distribution of this mass among the axles and, in the case of a semi-trailer or centre-axle trailer, load on the coupling point (maximum and minimum for each variant):

2.7. Minimum mass of the completed vehicle as stated by the manufacturer, in the case of an incomplete vehicle:

2.8.

Technically permissible maximum laden mass stated by the manufacturer (^y) (*):

2.8.1. Distribution of this mass among the axles, and in the case of a semi-trailer or centre-axle trailer, load on the coupling point (*):

2.9. Technically permissible maximum mass on each axle:

2.10. Technically permissible maximum mass on each axle group:

2.12.

Technically permissible maximum static vertical load/mass on the vehicle’s coupling point

2.12.2. Of the semi-trailer or centre-axle trailer:

2.16.

Intended registration/in service maximum permissible masses (optional: where these values are given, they shall be verified in accordance with the requirements of Annex IV to Directive 97/27/EC):

2.16.1. Intended registration/in service maximum permissible laden mass (Several entries possible for each technical configuration (^#)):

2.16.2. Intended registration/in service maximum permissible mass on each axle and, in the case of a semi-trailer or centre-axle trailer, intended load on the coupling point stated by the manufacturer if lower than the technically permissible maximum mass on the coupling point (Several entries possible for each technical configuration (^#)):

2.16.3. Intended registration/in service maximum permissible mass on each axle group (Several entries possible for each technical configuration (^#)):

2.16.4. Intended registration/in service maximum permissible towable mass (Several entries possible for each technical configuration (^#)):

2.16.5. Intended registration/in service maximum permissible mass of the combination (Several entries possible for each technical configuration (^#)):

5. AXLES

5.1. Description of each axle:

5.2. Make:

5.3. Type: …

5.4. Position of retractable axle(s):

5.5. Position of loadable axle(s):

6. SUSPENSION

6.2.

Type and design of the suspension of each axle or wheel:

6.2.1. Level adjustment: yes/no/optional (¹)

6.6.1.

Tyre/wheel combination(s) (for tyres indicate size designation, minimum load-capacity index, minimum speed category symbol; for wheels indicate rim size(s) and off-set(s))

6.6.1.1.

Axles

6.6.1.1.1. Axle 1:

6.6.1.1.2. Axle 2:

etc.

6.6.1.2. Spare wheel, if any:

6.6.2.

Upper and lower limit of rolling radii

6.6.2.1. Axle 1:

6.6.2.2. Axle 2:

etc.

7. STEERING

7.2.

Transmission and control

7.2.1. Type of steering transmission (specify for front and rear, if applicable):

7.2.2. Linkage to the wheels (including other than mechanical means; specify for front and rear, if applicable):

7.2.3. Method of assistance, if any:

8. BRAKES

8.5. Antilock braking system: yes/no/optional (¹)

8.9. Brief description of the braking devices (according to item 1.6 of the addendum to Appendix 1 of Annex IX to Directive 71/320/EEC):

9. BODYWORK

9.1. Type of bodywork:

9.17.

Statutory plates (Directive 76/114/EEC)

9.17.1. Photographs and/or drawings of the locations of the statutory plates and inscriptions and of the vehicle identification number:

9.17.4.

Manufacturer’s declaration of compliance with the requirement of item 1.1.1 of Annex II to Directive 76/114/EEC

9.17.4.1. The meaning of characters in the second section and, if applicable, in the third section used to comply with the requirements of section 5.3 of ISO Standard 3779-1983 shall be explained:

9.17.4.2. If characters in the second section are used to comply with the requirements of section 5.4 of ISO Standard 3779-1983 these characters shall be indicated:

11. CONNECTIONS BETWEEN TOWING VEHICLES AND TRAILERS AND SEMI-TRAILERS

11.1. Class and type of the coupling device(s) fitted or to be fitted:

11.5. EC type-approval number(s):