xmlns:atom="http://www.w3.org/2005/Atom" xmlns:atom="http://www.w3.org/2005/Atom"
The field(s) of use, existing and proposed, for preparations containing the active substance must be specified from among the following:
field use, such as agriculture, horticulture, forestry and viticulture,
protected crops,
amenity,
weed control on non-cultivated areas,
home gardening,
house plants,
plant products storage practice,
other (specify).
The nature of the effects on harmful organisms must be stated:
contact action,
stomach action,
inhalation action,
fungitoxic action,
fungistatic action,
desiccant,
reproduction inhibitor,
other (must be specified).
It must be stated whether or not the product is translocated in plants.
Details of the intended use must be provided.
Where relevant, effects achieved e.g. sprout suppression, retardation of ripening, reduction in stem length, enhanced fertilization etc. must be reported.
For each method of application and each use, the rate of application per unit (ha, m 2 , m 3 ) treated, in terms of g or kg of both preparation and active substance, must be provided.
Application rates shall normally be expressed in g or kg/ha or in kg/m 3 and where appropriate in g or kg/tonne; for protected crops and home gardening use rates shall be expressed in g or kg/100 m 2 or g or kg/m 3 .
The content of active substance shall be reported, as appropriate, in g/l, g/kg, mg/kg or in g/tonne.
The method of application proposed must be described fully, indicating the type of equipment to be used, if any, as well as the type and volume of diluent to be used per unit of area or volume.
The maximum number of applications to be used and their timing, must be reported. Where relevant the growth stages of the crop or plants to be protected and the development stages of the harmful organisms, must be indicated. Where possible the interval between applications, in days, must be stated.
The duration of protection afforded both by each application and by the maximum number of applications to be used, must be indicated.
Where relevant, minimum waiting periods between last application and sowing or planting of succeeding crops, which are necessary to avoid phytotoxic effects on succeeding crops, must be stated, and follow from the data provided under paragraph 6.6.
Limitations on choice of succeeding crops, if any, must be stated.
The proposed instructions for use of the preparation, to be printed on labels and leaflets, must be provided.]