Search Legislation

Commission Decision of 23 February 2010 amending Annex II to Directive 2000/53/EC of the European Parliament and of the Council on end-of-life vehicles (notified under document C(2010) 972) (Text with EEA relevance) (2010/115/EU)

 Help about what version

What Version

Close

This is a legislation item that originated from the EU

After exit day there will be three versions of this legislation to consult for different purposes. The legislation.gov.uk version is the version that applies in the UK. The EU Version currently on EUR-lex is the version that currently applies in the EU i.e you may need this if you operate a business in the EU.

The web archive version is the official version of this legislation item as it stood on exit day before being published to legislation.gov.uk and any subsequent UK changes and effects applied. The web archive also captured associated case law and other language formats from EUR-Lex.

Status:

This is the original version (as it was originally adopted).

‘ANNEX II

Materials and components exempt from Article 4(2)(a)

a

Dismantling if, in correlation with entry 10, an average threshold of 60 grams per vehicle is exceeded. For the application of this clause electronic devices not installed by the manufacturer on the production line shall not be taken into account.

b

This exemption shall be reviewed in 2014.

c

This exemption shall be reviewed before 1 January 2012.

d

Dismantling if, in correlation with entries 8(a) to 8(j), an average threshold of 60 grams per vehicle is exceeded. For the application of this clause electronic devices not installed by the manufacturer on the production line shall not be taken into account.

Materials and componentsScope and expiry date of the exemptionTo be labelled or made identifiable in accordance with Article 4(2)(b)(iv)
Lead as an alloying element
1.Steel for machining purposes and galvanised steel containing up to 0,35 % lead by weight
2(a).Aluminium for machining purposes with a lead content up to 2 % by weight
As spare parts for vehicles put on the market before 1 July 2005
2(b).Aluminium with a lead content up to 1,5 % by weight
As spare parts for vehicles put on the market before 1 July 2008
2(c).Aluminium with a lead content up to 0,4 % by weight
3.Copper alloy containing up to 4 % lead by weight
4(a).Bearing shells and bushes
As spare parts for vehicles put on the market before 1 July 2008
4(b).Bearing shells and bushes in engines, transmissions and air conditioning compressors
1 July 2011 and after that date as spare parts for vehicles put on the market before 1 July 2011
Lead and lead compounds in components
5.Batteries
X
6.Vibration dampers
X
7(a).Vulcanising agents and stabilisers for elastomers in brake hoses, fuel hoses, air ventilation hoses, elastomer/metal parts in the chassis applications, and engine mountings
As spare parts for vehicles put on the market before 1 July 2005
7(b).Vulcanising agents and stabilisers for elastomers in brake hoses, fuel hoses, air ventilation hoses, elastomer/metal parts in the chassis applications, and engine mountings containing up to 0,5 % lead by weight
As spare parts for vehicles put on the market before 1 July 2006
7(c).Bonding agents for elastomers in power-train applications containing up to 0,5 % lead by weight
As spare parts for vehicles put on the market before 1 July 2009
8(a).Lead in solders to attach electrical and electronic components to electronic circuit boards and lead in finishes on terminations of components other than electrolyte aluminium capacitors, on component pins and on electronic circuit boards
Vehicles type approved before 1 January 2016 and spare parts for these vehiclesXa
8(b).Lead in solders in electrical applications other than soldering on electronic circuit boards or on glass
Vehicles type approved before 1 January 2011 and spare parts for these vehiclesXa
8(c).Lead in finishes on terminals of electrolyte aluminium capacitors
Vehicles type approved before 1 January 2013 and spare parts for these vehiclesXa
8(d).Lead used in soldering on glass in mass airflow sensors
Vehicles type approved before 1 January 2015 and spare parts of such vehiclesXa
8(e).Lead in high melting temperature type solders (i.e. lead-based alloys containing 85 % by weight or more lead)
bXa
8(f).Lead in compliant pin connector systems
bXa
8(g).Lead in solders to complete a viable electrical connection between semiconductor die and carrier within integrated circuit flip chip packages
bXa
8(h).Lead in solder to attach heat spreaders to the heat sink in power semiconductor assemblies with a chip size of at least 1 cm2 of projection area and a nominal current density of at least 1 A/mm2 of silicon chip area
bXa
8(i).Lead in solders in electrical glazing applications on glass except for soldering in laminated glazing
Vehicles type approved before 1 January 2013 and spare parts for these vehiclescXa
8(j).Lead in solders for soldering in laminated glazing
bXa
9.Valve seats
As spare parts for engine types developed before 1 July 2003
10.Electrical components which contain lead in a glass or ceramic matrix compound except glass in bulbs and glaze of spark plugs
Xd (for components other than piezo in engines)
11.Pyrotechnic initiators
Vehicles type-approved before 1 July 2006 and spare parts for these vehicles
Hexavalent chromium
12(a).Corrosion preventive coatings
As spare parts for vehicles put on the market before 1 July 2007
12(b).Corrosion preventive coatings related to bolt and nut assemblies for chassis applications
As spare parts for vehicles put on the market before 1 July 2008
13.Absorption refrigerators in motor caravans
Mercury
14(a).Discharge lamps for headlight application
Vehicles type approved before 1 July 2012 and spare parts for these vehicles
14(b).Fluorescent tubes used in instrument panel displays
Vehicles type approved before 1 July 2012 and spare parts for these vehicles
Cadmium
15.Batteries for electrical vehicles
As spare parts for vehicles put on the market before 31 December 2008

Notes:

A maximum concentration value up to 0,1 % by weight and in homogeneous material, for lead, hexavalent chromium and mercury and up to 0,01 % by weight in homogeneous material for cadmium shall be tolerated.

The reuse of parts of vehicles which were already on the market at the date of expiry of an exemption shall be allowed without limitation since it is not covered by Article 4(2)(a).

Spare parts put on the market after 1 July 2003 which are used for vehicles put on the market before 1 July 2003 shall be exempted from the provisions of Article 4(2)(a)(1).

(1)

This clause shall not apply to wheel balance weights, carbon brushes for electric motors and brake linings.’

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the EU Official Journal
  • lists of changes made by and/or affecting this legislation item
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources