The Marine Works (Environmental Impact Assessment) (Scotland) Regulations 2017

Regulation 9(1)(a)(i) and (2)(a)

SCHEDULE 3 SELECTION CRITERIA FOR SCREENING SCHEDULE 2 WORKS

Characteristics of works

1.  The characteristics of works must be considered having regard, in particular, to—

(a) the size and design of the works;

(b) cumulation with other existing works and/or approved works;

(c) the use of natural resources, in particular land, soil, water and biodiversity;

(d) the production of waste;

(e) pollution and nuisances;

(f) the risk of major accidents and/or disasters which are relevant to the project concerned, including those caused by climate change, in accordance with scientific knowledge;

(g) the risks to human health (for example due to water contamination or air pollution).

Location of works

2.  The environmental sensitivity of geographical areas likely to be affected by works must be considered having regard, in particular, to—

(a) the existing and approved land use;

(b) the relative abundance, availability, quality and regenerative capacity of natural resources (including soil, land, water and biodiversity) in the area and its underground;

(c) the absorption capacity of the natural environment, paying particular attention to the following areas—

(i) wetlands, riparian areas, river mouths;

(ii) coastal zones and the marine environment;

(iii) mountain and forest areas;

(iv) nature reserves and parks;

(v) European sites and other areas classified or protected under national legislation;

(vi) areas in which there has already been a failure to meet the environmental quality standards, laid down in Union legislation and relevant to the project, or in which it is considered that there is such a failure;

(vii) densely populated areas;

(viii) landscapes and sites of historical, cultural or archaeological significance.

Characteristics of the potential impact

3.  The likely significant effects of the works on the environment must be considered in relation to criteria set out in paragraphs 1 and 2 above, with regard to the impact of the works on the factors specified in regulation 5(3), taking into account—

(a) the magnitude and spatial extent of the impact (for example geographical area and size of the population likely to be affected);

(b) the nature of the impact;

(c) the transboundary nature of the impact;

(d) the intensity and complexity of the impact;

(e) the probability of the impact;

(f) the expected onset, duration, frequency and reversibility of the impact;

(g) the cumulation of the impact with the impact of other existing and/or approved works;

(h) the possibility of effectively reducing the impact.